Corrigendum: Equivalent of distribution network with distributed photovoltaics for electromechanical transient study based on user-defined modeling

Jiang, Zhe; Zhao, Kang; He, Zhenghua; Zhang, Zhixuan; Zhou, Ning

doi:10.3389/fenrg.2023.1152736

CORRECTION article

Front. Energy Res., 13 February 2023

Sec. Process and Energy Systems Engineering

Volume 11 - 2023 | https://doi.org/10.3389/fenrg.2023.1152736

Corrigendum: Equivalent of distribution network with distributed photovoltaics for electromechanical transient study based on user-defined modeling

This article is a correction to:

Equivalent of distribution network with distributed photovoltaics for electromechanical transient study based on user-defined modeling
1. Read original article

Zhe Jiang¹

Kang Zhao¹

Zhenghua He²*

Zhixuan Zhang¹

Ning Zhou¹

¹Power Grid Technology Center, State Grid Shandong Electric Power Research Institute, Jinan, China
²School of Electrical Engineering, Shandong University, Jinan, China

A Corrigendum on
Equivalent of distribution network with distributed photovoltaics for electromechanical transient study based on user-defined modeling

by Jiang Z, Zhao K, He Z, Zhang Z and Zhou N (2023). Front. Energy Res. 11:1119254. doi: 10.3389/fenrg.2023.1119254

In the original article, there was an error in affiliations. Instead of “Electric Power Research Institute, Jinan, China”, the correct affiliation is“State Grid Shandong Electric Power Research Institute, Jinan, China”.

The authors apologize for this error and state that this does not change the scientific conclusions of the article in any way. The original article has been updated.

Publisher’s note

All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article, or claim that may be made by its manufacturer, is not guaranteed or endorsed by the publisher.

Keywords: distributed photovoltaic, distribution network, user-defined modeling, dynamic equivalent, transient simulation

Citation: Jiang Z, Zhao K, He Z, Zhang Z and Zhou N (2023) Corrigendum: Equivalent of distribution network with distributed photovoltaics for electromechanical transient study based on user-defined modeling. Front. Energy Res. 11:1152736. doi: 10.3389/fenrg.2023.1152736

Received: 28 January 2023; Accepted: 02 February 2023;
Published: 13 February 2023.

Approved by:

Frontiers Editorial Office, Frontiers Media SA, Switzerland

Copyright © 2023 Jiang, Zhao, He, Zhang and Zhou. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.

*Correspondence: Zhenghua He, hezhua@mail.sdu.edu.cn

Disclaimer: All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.