Skip to main content

CORRECTION article

Front. Earth Sci., 05 April 2024
Sec. Earth and Planetary Materials
Volume 12 - 2024 | https://doi.org/10.3389/feart.2024.1407596

Corrigendum: Evaluation of shear strength parameters of sustainable utilization of scrap tires derived geo-materials for civil engineering applications

This article is a correction to:

  1. Evaluation of shear strength parameters of sustainable utilization of scrap tires derived geo-materials for civil engineering applications

    1. Read original article
Hamza AminHamza Amin1Beenish Jehan Khan Beenish Jehan Khan1*Mahmood AhmadMahmood Ahmad2Ahmad HakamyAhmad Hakamy3Muhammad Ali SikandarMuhammad Ali Sikandar1Mohanad Muayad Sabri SabriMohanad Muayad Sabri Sabri4
  • 1Department of Civil Engineering, CECOS University of IT and Emerging Sciences, Peshawar, Pakistan
  • 2Department of Civil Engineering, University of Engineering and Technology Peshawar (Bannu Campus), Bannu, Pakistan
  • 3Department of Physics, Faculty of Applied Science, Umm Al-Qura University, Makkah, Saudi Arabia
  • 4Peter the Great St. Petersburg Polytechnic University, St. Petersburg, Russia

A Corrigendum on
Evaluation of shear strength parameters of sustainable utilization of scrap tires derived geo-materials for civil engineering applications

by Amin H, Khan BJ, Ahmad M, Hakamy A, Sikandar MA and Sabri Sabri MM (2023). Front. Earth Sci. 11:1116169. doi: 10.3389/feart.2023.1116169

In the published article, the Funding statement was incorrect. The correct statement appears below:

“This research was supported by a grant from the Russian Science Foundation No. 22-79-10021, https://rscf.ru/project/22-79-10021/.”

The authors apologize for this error and state that this does not change the scientific conclusions of the article in any way. The original article has been updated.

Publisher’s note

All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article, or claim that may be made by its manufacturer, is not guaranteed or endorsed by the publisher.

Keywords: stress-strain, shear strength of sand-tire chips, direct shear apparatus, triaxial apparatus, failure

Citation: Amin H, Khan BJ, Ahmad M, Hakamy A, Sikandar MA and Sabri Sabri MM (2024) Corrigendum: Evaluation of shear strength parameters of sustainable utilization of scrap tires derived geo-materials for civil engineering applications. Front. Earth Sci. 12:1407596. doi: 10.3389/feart.2024.1407596

Received: 27 March 2024; Accepted: 27 March 2024;
Published: 05 April 2024.

Approved by:

Frontiers Editorial Office, Frontiers Media SA, Switzerland

Copyright © 2024 Amin, Khan, Ahmad, Hakamy, Sikandar and Sabri Sabri. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.

*Correspondence: Beenish Jehan Khan, beenish@cecos.edu.pk

Disclaimer: All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.