94% of researchers rate our articles as excellent or good
Learn more about the work of our research integrity team to safeguard the quality of each article we publish.
Find out more
Hamza Amin1
Beenish Jehan Khan1*
Mahmood Ahmad2
Ahmad Hakamy3
Muhammad Ali Sikandar1
Mohanad Muayad Sabri Sabri4- 1Department of Civil Engineering, CECOS University of IT and Emerging Sciences, Peshawar, Pakistan
- 2Department of Civil Engineering, University of Engineering and Technology Peshawar (Bannu Campus), Bannu, Pakistan
- 3Department of Physics, Faculty of Applied Science, Umm Al-Qura University, Makkah, Saudi Arabia
- 4Peter the Great St. Petersburg Polytechnic University, St. Petersburg, Russia
A Corrigendum on
Evaluation of shear strength parameters of sustainable utilization of scrap tires derived geo-materials for civil engineering applications
by Amin H, Khan BJ, Ahmad M, Hakamy A, Sikandar MA and Sabri Sabri MM (2023). Front. Earth Sci. 11:1116169. doi: 10.3389/feart.2023.1116169
In the published article, the Funding statement was incorrect. The correct statement appears below:
“This research was supported by a grant from the Russian Science Foundation No. 22-79-10021, https://rscf.ru/project/22-79-10021/.”
The authors apologize for this error and state that this does not change the scientific conclusions of the article in any way. The original article has been updated.
Publisher’s note
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article, or claim that may be made by its manufacturer, is not guaranteed or endorsed by the publisher.
Keywords: stress-strain, shear strength of sand-tire chips, direct shear apparatus, triaxial apparatus, failure
Citation: Amin H, Khan BJ, Ahmad M, Hakamy A, Sikandar MA and Sabri Sabri MM (2024) Corrigendum: Evaluation of shear strength parameters of sustainable utilization of scrap tires derived geo-materials for civil engineering applications. Front. Earth Sci. 12:1407596. doi: 10.3389/feart.2024.1407596
Received: 27 March 2024; Accepted: 27 March 2024;
Published: 05 April 2024.
Approved by:
Frontiers Editorial Office, Frontiers Media SA, SwitzerlandCopyright © 2024 Amin, Khan, Ahmad, Hakamy, Sikandar and Sabri Sabri. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.
*Correspondence: Beenish Jehan Khan, YmVlbmlzaEBjZWNvcy5lZHUucGs=