Skip to main content

RETRACTION article

Front. Chem., 04 September 2023
Sec. Nanoscience
Volume 11 - 2023 | https://doi.org/10.3389/fchem.2023.1285254

Retraction: Improving the melting performance in a triple-pipe latent heat storage system using hemispherical and quarter-spherical fins with a staggered arrangement

This article is a retraction of:

  1. RETRACTED: Improving the melting performance in a triple-pipe latent heat storage system using hemispherical and quarter-spherical fins with a staggered arrangement

    1. Read original article
Frontiers Editorial Office Frontiers Editorial Office*

A Retraction of the Original Research Article
Improving the melting performance in a triple-pipe latent heat storage system using hemispherical and quarter-spherical fins with a staggered arrangement

by Abed AM, Mohammed HI, Patra I, Mahdi JM, Arshad A, Sivaraman R, Ibrahem RK, Al-Qrimli FA, Dhahbi S and Talebizadehsardari P (2022). Front. Chem. 10:1018265. doi: 10.3389/fchem.2022.1018265

The journal retracts the 2022 article cited above.

Following publication, concerns were raised regarding the contributions of the authors of the article. Our investigation, conducted in accordance with Frontiers policies, confirmed a serious breach of our authorship policies and of publication ethics; the article is therefore retracted.

This retraction was approved by the Chief Editors of Frontiers in Chemistry and the Chief Executive Editor of Frontiers. The authors do not agree to this retraction.

Citation: Frontiers Editorial Office (2023) Retraction: Improving the melting performance in a triple-pipe latent heat storage system using hemispherical and quarter-spherical fins with a staggered arrangement. Front. Chem. 11:1285254. doi: 10.3389/fchem.2023.1285254

Received: 29 August 2023; Accepted: 29 August 2023;
Published: 04 September 2023.

Approved by:

Steve Suib, University of Connecticut, United States

Copyright © 2023 Frontiers Editorial Office. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.

*Correspondence: Frontiers Editorial Office, research.integrity@frontiersin.org

Disclaimer: All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.