Skip to main content

CORRECTION article

Front. Chem., 02 August 2023
Sec. Green and Sustainable Chemistry
Volume 11 - 2023 | https://doi.org/10.3389/fchem.2023.1266823

Corrigendum: Additive manufacturing of Al2O3 ceramics with MgO/SiC contents by laser powder bed fusion process

This article is a correction to:

  1. Laser Powder Bed Fusion and Heat Treatment of an AlCrFe2Ni2 High Entropy Alloy

    1. Read original article
Asif Ur Rehman,, Asif Ur Rehman1,2,3*Abid Ullah,, Abid Ullah2,3,4*Tingting Liu Tingting Liu5*Rashid Ur RehmanRashid Ur Rehman6Metin U. Salamci,,ERMAKSANBursaTürkiyeDepartment of Mechanical EngineeringFaculty of EngineeringGazi UniversityAnkaraTürkiyeAdditive Manufacturing Technologies ResearchApplication Center-EKTAMGazi UniversityAnkaraTürkiyeCAS Key Laboratory of Mechanical BehaviorDesign of MaterialsDepartment of Modern MechanicsUniversity of ScienceTechnology of ChinaHefeiAnhuiChinaSchool of Mechanical EngineeringNanjing University of ScienceTechnologyNanjingJiangsuChinaIncheon National UniversityIncheonRepublic of KoreaAdvanced Manufacturing Technologies Center of Excellence- URTEMMAnkaraTürkiyeMetin U. Salamci2,3,71ERMAKSANBursa BursaTürkiye2Department of Mechanical EngineeringFaculty of Engineering Faculty of EngineeringGazi University Gazi UniversityAnkara AnkaraTürkiye3Additive Manufacturing Technologies ResearchApplication Center-EKTAM Application Center-EKTAMGazi University Gazi UniversityAnkara AnkaraTürkiye4CAS Key Laboratory of Mechanical BehaviorDesign of Materials Design of MaterialsDepartment of Modern Mechanics Department of Modern MechanicsUniversity of Science University of ScienceTechnology of China Technology of ChinaHefei HefeiAnhui AnhuiChina5School of Mechanical EngineeringNanjing University of Science Nanjing University of ScienceTechnology TechnologyNanjing NanjingJiangsu JiangsuChina6Incheon National UniversityIncheon IncheonRepublic of Korea7Advanced Manufacturing Technologies Center of Excellence- URTEMMAnkara AnkaraTürkiye Türkiye

A Corrigendum on
Additive manufacturing of Al2O3 ceramics with MgO/SiC contents by laser powder bed fusion process

by Ur Rehman A, Ullah A, Liu T, Ur Rehman R and Salamci MU (2023). Front. Chem. 11:1034473. doi: 10.3389/fchem.2023.1034473

In the published article, there were errors in the Funding statement. The project name A2M2TECH was missing. An additional funding source, The Scientific and Technological Research Council of Türkiye, should also have been included. The correct Funding statement appears below:

“This work was supported by the Frontier Leading Technology Basic Research Project of Jiangsu (No. BK20202007), the National Natural Science Foundation of China (Grant No.52005262), BK20190463 and No. B18028. This work was also supported by the National Natural Science Foundation of China (grant number 51775281). This project has also received financial support from the European Union’s Horizon 2020 (H2020) research and innovation program under the Marie Skłodowska-Curie, grant agreement No. 764935. This work has also received funding from the H2020 research and innovation program under the Marie Skłodowska-Curie grant agreement No. 101034425 for the project titled A2M2TECH. This study has also received financial support from The Scientific and Technological Research Council of Türkiye (TUBITAK) with grant No 120C158 for the same A2M2TECH project under the TUBITAK’s 2236/B program.”

The authors apologize for these error and state that this does not change the scientific conclusions of the article in any way. The original article has been updated.

Publisher’s note

All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article, or claim that may be made by its manufacturer, is not guaranteed or endorsed by the publisher.

Keywords: additive manufacturing, sintering, defects, ceramic, oxidation, laser processing

Citation: Ur Rehman A, Ullah A, Liu T, Ur Rehman R and Salamci MU (2023) Corrigendum: Additive manufacturing of Al2O3 ceramics with MgO/SiC contents by laser powder bed fusion process. Front. Chem. 11:1266823. doi: 10.3389/fchem.2023.1266823

Received: 25 July 2023; Accepted: 26 July 2023;
Published: 02 August 2023.

Approved by:

Frontiers Editorial Office, Frontiers Media SA, Switzerland

Copyright © 2023 Ur Rehman, Ullah, Liu, Ur Rehman and Salamci. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.

*Correspondence: Asif Ur Rehman, asyf.rehman@gmail.com; Abid Ullah, abidmech95@gmail.com; Tingting Liu, liutingting@njust.edu.cn

Disclaimer: All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.