Shuaifei Zhao
Qingyi Zeng
Chong-Chen Wang- 1Institute for Frontier Materials, Deakin University, Geelong, VIC, Australia
- 2School of Resources and Environment and Safety Engineering, University of South China, Hengyang, Hunan, China
- 3Beijing Key Laboratory of Functional Materials for Building Structure and Environment Remediation, Beijing University of Civil Engineering and Architecture, Beijing, China
Editorial on the ResearchTopic
Inorganic materials for energy andenvironmental applications
Inorganic materials have played significant roles in both energy conversion and environmental decontamination, relevant to chemical and environmental engineering. These inorganic materials are diverse, such as metals, metal oxides, nonmetallic oxides, sulphides, nitrides, phosphides and haloids. Inorganic materials often have high thermal stabilities, unique physicochemical properties and diverse nanostructures, making them highly desirable in various heterogeneous adsorption and catalytic applications (Goodman et al., 2020). As a result, they have been widely used as heterogeneous catalysts and/or adsorbents for CO2 conversion, fuel production, pollutant degradation or adsorption (He et al., 2020; Yang et al., 2021). Figure 1 summarizes the typical applications of inorganic materials in the energy and environmental fields, including as catalysts (Kuang et al., 2020), electrodes (Li et al., 2020), adsorbents (Zito and Shipley, 2015) and membranes (Song et al., 2016) for energy conversion via oxidation/reduction, or environmental decontamination via adsorption, rejection, oxidation or reduction (Zeng et al., 2020; Xu et al., 2021).
FIGURE 1. Typical applications of inorganic materials in the energy and environmental fields.
Numerous metals and metal oxides have been employed as electro- or photo-catalysts for energy conversion and pollutant degradation. Qi et al. developed a porous Ti4O7 electrocatalytic membrane by employing Ti powder as the reducing agent to thermally reduce TiO2 in vacuum. The prepared electrocatalytic membrane showed a high oxygen evolution potential (∼2.7 V/SHE). Wang et al. develop a new iron cathode electro-Fenton process coupled with a pH-regulation divided electrolysis cell for p-nitrophenol degradation. In the electrochemical Fenton system, an iron plate was used as the cathode to inhibit the release of iron ions and promote the reduction of Fe3+ to Fe2+. Therefore, excellent electrocatalytic degradation performance towards organic pollutants was achieved. Wang and Wang synthesized a NiO modified BiVO4 nanocomposite by a hydrothermal and calcination method. The as-prepared nanocomposite showed enhanced photoelectrochemical performance due to the unique NiO lamellar structure that provided a large number of active sites.
Wang et al. used a sol-gel self-combustion method to prepare carboxylate-rich carbon-modified Fe3O4 magnetic catalysts for heterogeneous Fenton degradation of organic pollutants. The prepared Fe3O4-based catalysts displayed improved heterogeneous Fenton degradation performance due to the enhanced pollutant adsorption. Zhu et al. synthesized a CdS/microcrystalline cellulose nanocomposite photocatalyst using an ultrasonic-assisted method. The prepared nanocomposite photocatalyst displayed enhanced pollutant degradation performance under visible light due to the heterojunction formation that efficiently separates the photogenerated electrons and holes of the photocatalyst. Wang et al. prepared a Co3O4/Ti cathode by electrodeposition for electrocatalytic reduction of nitrate, in which the NO3− was reduced to N2 and NH4+ by the catalysis of Co3O4/Ti, and then NH4+ was selectively oxidized into N2 assisted by chloride ions and using IrO2-RuO2/Ti as the anode. Qiu et al. prepared Pt-modified TiO2 nanotubes as catalysts for photocatalytic degradation of Rhodamine B (RhB) under UV light. It was reported that the superoxide radical anions (O2−∙), photogenerated hole (h+) and hydroxyl radical (OH∙) were the main active species contributing for RhB degradation.
In addition, metal and metal oxide based or modified materials have also been used for other catalytic applications. Bai et al. reported the Fischer–Tropsch synthesis performance of Co-based catalysts supported on graphitized ordered mesoporous carbon. The high catalytic performance resulted from the highly crystallized graphitic structure of the mesoporous carbon and the uniform dispersion of CoO on the support. Dai et al. used ion-exchange, in situ modification and complexation-excessive impregnation modification methods to modify SAPO-11 molecular sieves with Ni. The Ni-modified SAPO-11 molecular sieves were supported by NiWS catalysts for hydroisomerization of n-Hexadecane. The complexation-excessive impregnation modification method led to the best hydroisomerization performance. Huang et al. studied the effect of Ga2O3 on the hydrodesulfurization performance of 4,6-dimethyldibenzothiophene catalyzed by the stepwise impregnation method. Ga2O3 promoted Ni and Mo species to disperse uniformly and doping of more Ni atoms into the MoS2 crystals, increasing the average stacking number and the length of MoS2. As a result, enhanced hydrodesulfurization performance was achieved due to the formation of more NiMoS active phases in the system.
Adsorption is a simple but effective way for environmental decontamination (Zhang et al., 2018; Samadi et al., 2021). Various inorganic materials have been used for contaminant removal by adsorption. Zhang et al. prepared a series of nanostructured Fe-Cu binary oxides for arsenic removal. The crystallinity and structure of the Fe-Cu binary oxides had a significant impact on the arsenic adsorption performance. The oxides with lower crystallinity showed higher surface hydroxyl density and better adsorption performance. Li et al. reviewed the preparation, classification and applications of templated materials, particularly adsorbents in wastewater treatment. The templating method can endow materials with high specific area and unique porous structures, thereby enhancing the material sorption performance towards aqueous pollutants. Wei et al. reviewed the composite adsorbents for fluoride removal, including the adsorbent types (i.e., metal oxides/hydroxides, biopolymers, carbon-based, and others), preparation and sorption performance. The adsorption mechanisms for fluoride removal involving electrostatic attraction, ion exchange, complexation, and hydrogen bonding were also discussed.
Recently, with the promotion of the circular economy, waste based materials have attracted growing interest for various applications, such as fertilizers (Ye et al., 2019), carbon capture (Ji et al., 2018), membrane separation (Ni et al., 2022). Yu et al. prepared new biochar from excess sludge, followed by acetic acid modification. The modified sludge-derived biochar displayed improved porosity and enriched–COOH functional groups, thereby enhancing its adsorption performance to uranium. However, the catalytic performance of the sorbent was not discussed. Zeng et al. fabricated porous glass-ceramics based on coal fly ash without using pore forming agents by direct overfiring, in which borax was used to destroy the structure of quartz and amorphous vitreous body in coal fly ash and thus reduce the sintering temperature by the B-O bond. Chen et al. fabricated a non-sintered ceramsite from pyrite tailings for phosphorus removal. Both Plackett-Burman Design (PBD) and Box-Behnken Design (BBD) based response surface methodology were used to optimize the fabrication parameters.
Cellulase plays a key role in the production of fuel ethanol by enzymatic hydrolysis of lignocellulose, and immobilization of cellulase on the nanocarriers is an effective way to improve the hydrolysis efficiency. Wang et al. reviewed the significant roles of surfactants in oriented immobilization of cellulase on nanocarriers as well as a surfactant reversed micelle system.
In summary, this Research Topic discussed various inorganic materials as catalysts or adsorbents with unique nanostructures and functionalities for energy conversion and environmental decontamination. In the future, inorganic materials will continue to play a vital role in addressing global energy and environmental challenges, such as climate change, energy shortages and environmental pollution. Engineering new high performance heterogeneous catalysts and understanding the limiting factors and their mechanisms in the catalytic reaction are two key research directions that should be paid more attention to.
Author contributions
SZ, QZ and C-CW contributed to the writing of this editorial.
Conflict of interest
The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest.
Publisher’s note
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article, or claim that may be made by its manufacturer, is not guaranteed or endorsed by the publisher.
References
Goodman, E. D., Zhou, C., and Cargnello, M. (2020). Design of organic/inorganic hybrid catalysts for energy and environmental applications. ACS Cent. Sci. 6 (11), 1916–1937. doi:10.1021/acscentsci.0c01046
He, Z., Mahmud, S., Yang, Y., Zhu, L., Zhao, Y., Zeng, Q., et al. (2020). Polyvinylidene fluoride membrane functionalized with zero valent iron for highly efficient degradation of organic contaminants. Sep. Purif. Technol. 250, 117266. doi:10.1016/j.seppur.2020.117266
Ji, L., Yu, H., Yu, B., Jiang, K., Grigore, M., Wang, X., et al. (2018). Integrated absorption–mineralisation for energy-efficient CO2 sequestration: Reaction mechanism and feasibility of using fly ash as a feedstock. Chem. Eng. J. 352, 151–162. doi:10.1016/j.cej.2018.07.014
Kuang, H., He, Z., Li, M., Huang, R., Zhang, Y., Xu, X., et al. (2020). Enhancing co-catalysis of MoS2 for persulfate activation in Fe3+-based advanced oxidation processes via defect engineering. Chem. Eng. J. 417, 127987. doi:10.1016/j.cej.2020.127987
Li, C., Feng, G., Pan, Z., Song, C., Fan, X., Tao, P., et al. (2020). High-performance electrocatalytic microfiltration CuO/Carbon membrane by facile dynamic electrodeposition for small-sized organic pollutants removal. J. Membr. Sci. 601, 117913. doi:10.1016/j.memsci.2020.117913
Ni, T., You, Y., Xie, Z., Kong, L., Newman, B., Henderson, L., et al. (2022). Waste-derived carbon fiber membrane with hierarchical structures for enhanced oil-in-water emulsion separation: Performance and mechanisms. J. Membr. Sci. 653, 120543. doi:10.1016/j.memsci.2022.120543
Samadi, A., Xie, M., Li, J., Shon, H., Zheng, C., Zhao, S., et al. (2021). Polyaniline-based adsorbents for aqueous pollutants removal: A review. Chem. Eng. J. 418, 129425. doi:10.1016/j.cej.2021.129425
Song, H., Zhao, S., Chen, J., and Qi, H. (2016). Hydrothermally stable Zr-doped organosilica membranes for H2/CO2 separation. Microporous Mesoporous Mater. 224, 277–284. doi:10.1016/j.micromeso.2016.01.001
Xu, X., Zhang, Y., Zhou, S., Huang, R., Huang, S., Kuang, H., et al. (2021). Activation of persulfate by MnOOH: Degradation of organic compounds by nonradical mechanism. Chemosphere 272, 129629. doi:10.1016/j.chemosphere.2021.129629
Yang, Y., Xiong, Z., Wang, Z., Liu, Y., He, Z., Cao, A., et al. (2021). Super-adsorptive and photo-regenerable carbon nanotube based membrane for highly efficient water purification. J. Membr. Sci. 621, 119000. doi:10.1016/j.memsci.2020.119000
Ye, W., Liu, H., Jiang, M., Lin, J., Ye, K., Fang, S., et al. (2019). Sustainable management of landfill leachate concentrate through recovering humic substance as liquid fertilizer by loose nanofiltration. Water Res. 157, 555–563. doi:10.1016/j.watres.2019.02.060
Zeng, Q., Chang, S., Beyhaqi, A., Wang, M., and Hu, C. (2020). Efficient electricity production coupled with water treatment via a highly adaptable, successive water-energy synergistic system. Nano Energy 67, 104237. doi:10.1016/j.nanoen.2019.104237
Zhang, X., Fang, X., Li, J., Pan, S., Sun, X., Shen, J., et al. (2018). Developing new adsorptive membrane by modification of support layer with iron oxide microspheres for arsenic removal. J. Colloid Interface Sci. 514, 760–768. doi:10.1016/j.jcis.2018.01.002
Keywords: heterogeneous catalysis, adsorption, energy conversion, pollutant removal, catalyst
Citation: Zhao S, Zeng Q and Wang C-C (2022) Editorial: Inorganic materials for energy and environmental applications. Front. Chem. 10:977501. doi: 10.3389/fchem.2022.977501
Received: 24 June 2022; Accepted: 05 July 2022;
Published: 22 July 2022.
Edited and reviewed by:
Sukhendu Mandal, Indian Institute of Science Education and Research, Thiruvananthapuram, IndiaCopyright © 2022 Zhao, Zeng and Wang. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.
*Correspondence: Shuaifei Zhao, s.zhao@deakin.edu.au; Qingyi Zeng, qingyizeng@usc.edu.cn; Chong-Chen Wang, wangchongchen@bucea.edu.cn