Shuwen Zhu
Xinyuan Li
Jiatao Zhang- MOE Key Laboratory of Cluster Science, School of Chemistry and Chemical Engineering, Beijing Institute of Technology, Beijing, China
Photocatalysis, directly converting solar energy into chemical energy, is identified as an ideal strategy to reduce the increasing consumption of fossil fuels and facilitate carbon neutralization. In the past few years, a great number of endeavors have been devoted to developing photocatalysts with a high conversion efficiency and selectivity. Atomically surficial modulation strategies, including surface vacancies, single-atom modification, and dual-site components, exhibited positive impacts on tuning key steps of photocatalytic reactions. In this mini-review, we focus on the latest progress of the atomically surficial modulations on two-dimensional semiconductor photocatalysts and their role in enhancing selectively photocatalytic performance. We hope that this mini-review could provide new insights for researchers on nanosynthesis and photocatalysis.
Introduction
Photocatalysis is regarded as an efficient strategy to directly convert solar energy into chemical energy, which provides a solution to release the increasingly serious shortage of natural resources (Bai et al., 2017; Gao et al., 2020). Photocatalytic reactions are mainly driven by photo-induced charge carriers, and the reaction process could be divided into charge generation, separation, migration, and surficial reactions (Li et al., 2016; Gao et al., 2017; Yang et al., 2021). The utilization efficiency of carriers in each step determines the overall performance of photocatalysis (Li A et al., 2019). The two-dimensional (2D) nanocrystals with thin thicknesses are attractive candidates for photocatalysts by virtue of the short carrier transport distance and thus allow for improved charge separation (Tan et al., 2017; Wang H. et al., 2020). Moreover, the large specific surface area of 2D nanocrystals could expose more active sites, which could provide a large parameter space for the establishment of surficial modulations. The organization of surficial vacancies, single-atom modification, and dual-site components (as illustrated in Figure 1) are effective strategies for surficial modulation for enhanced photocatalytic performance, such as enlarging the light absorption region, facilitating electron–hole separation and transportation, and improving gas adsorption and activation properties. In this mini-review, the latest progress of the surficial modulations on 2D semiconductor photocatalysts with emphasis on their enhanced photocatalytic performance will be introduced.
FIGURE 1. Surficial modulations on 2D semiconductor photocatalysts discussed in this mini-review. (A) Surface vacancies. (B) Single-atom modification. (C) Dual-site components.
Surficial Vacancies
Normally, high-crystalline nanocrystals with a suitable band gap could feature a high build-in electronic field for a remarkable density of photo-induced charge carriers. By further modulating their surficial active sites, the light absorption and photo-induced charge transportation and separation processes could be further improved for enhanced photocatalytic performance (Sun et al., 2020). Two-dimensional semiconductor photocatalysts with atomically surficial modulation for selective photocatalytic reactions are introduced in Table 1. The surface modulation methods, active sites, photocatalyst conditions, and selectivity of the 2D photocatalysts described in the mini-review are highlighted. Among other surficial modulation strategies, the surficial vacancies (Figure 1A) could significantly change the local chemical coordination and surficial valence of the catalyst, which could not only mediate the surficial band gap but also enhance the activation of reactive molecules and charge transfer. Vacancies and adjustment of the surface band gap had a synergistic effect to reduce the recombination rate of photo-generated electrons and holes (Jo et al., 2019; Kong et al., 2020; Aggarwal et al., 2021). For example, the Chai group synthesized atomic-layered g-C3N4 with nitrogen vacancies (VN-g-C3N4), which exhibited high performance in converting CO2 to CH4 with high selectivity (Tang et al., 2019). The π-conjugated aromatic ring structure of g-C3N4 was distorted after the introduction of VN. At the same time, the introduced vacancy energy level changed the band gap. With increasing VN density, the catalyst exhibited increased visible light absorption and enhanced reduction ability. In addition, the introduced VN could suppress the recombination of electron–hole pairs because the vacancy level could act as a reservoir for trapping electrons. Therefore, the CH4 yield was 3.16 times and 5.14 times higher than its pristine ultrathin material and bulk material, respectively. The Hu group reported the preparation of 2D-TiO2 nanosheets having adjustable oxygen vacancies (VO) for selectively photocatalytic amine oxidation (Chen et al., 2020). They reported that the establishment of a hybrid energy level under the conduction band generated by surficial vacancies could decrease the band gaps, thereby enhancing the visible light catalytic activity. Meanwhile, the surficial oxygen vacancies facilitated the enhanced activation of O2 to 1O2 and O2•−. During the selectively light-driven catalytic process of benzylamine, O2 was more inclined to be adsorbed on the surficial VO of TiO2, the photo-induced electrons could be transferred to the positively charged VO reducing O2 to O2•−. The generated holes were largely transferred to the surface and oxidized most of the O2•− to 1O2. Therefore, the generated 1O2 and O2•− still participated in the oxidation of benzylamine simultaneously, showing selective and efficient conversion of benzylamine to imine.
TABLE 1. Comparison of 2D semiconductor photocatalysts with atomically surficial modulation for selective photocatalytic reactions.
Another representative study by the Chen and Han group reported that ZrS3 nanoribbons (NBs) containing disulfide (S22−) vacancies and sulfide anion (S2−) vacancies as a photocatalyst exhibited good photocatalytic performance for the formation of H2O2 and simultaneously selective conversion of benzylamine to benzonitrile, and the selectivity exceeded 99% (Tian et al., 2021). Similarly, they demonstrated that S22− vacancies in ZrS3 NBs accelerated the separation of photo-induced carriers, hole extraction, and kinetics of benzylamine oxidation. In another impressive study by the Xie group, cubic-phase In2S3 nanosheets were applied as a template, and S vacancies were introduced on their surface, which could enlarge the density of charge carriers involved in this reaction (Sun et al., 2019). It was indicated that the surficial S vacancies could promote the carrier separation and transfer and perform highly selective photocatalytic oxidation reactions by enhanced production of O2•− as well. Theoretical simulations exhibited that the density of states of Valence Band Maximum (VBM) was significantly enhanced, which would inhibit electron–hole recombination.
Compared to the aforementioned anion vacancies, cation vacancies were relatively difficult to control, which could closely affect the conductivity and further affect the charge carrier mobility of the 2D nanocrystals in determining their separation of charge carriers (Hui et al., 2017). In addition, compared with the ideal vacancies, the metal vacancies on the engineering surface had an obvious electronic structure change due to the diversity of the electronic configuration and orbital of metal cations. The Sun and Xie group synthesized the one-unit-cell ZnIn2S4 layers with rich Zn vacancies (VZn) to realize efficient and selective solar CO2 reduction performances (Jiao et al., 2017). The results of PL, SPV, and TA showed that the introduction of Zn vacancies into the ZnIn2S4 layer could significantly accelerate the charge transport, improve the electron–hole separation efficiency, and further increase the CO2 photoreduction efficiency. Additionally, DFT results of the density of states (DOS) indicated that the presence of zinc vacancy led to notable enhancement in the charge density of nearby sulfur atoms, which displayed that the electrons could be easily photoexcited to the conduction band and thus clustered around the zinc vacancies nearby the sulfur atoms and promoted enhanced carrier separation and transport. The Liu and Xia group synthesized BiOBr ultrathin nanosheets with Bi vacancies (VBi-BiOBr) to optimize CO2 photoreduction performance (Di et al., 2019b). DFT calculations indicated that an increased charge density around the Fermi level due to the engineered Bi vacancies and VBi-BiOBr could be endowed with increased charge carriers to participate in light-driven CO2 conversion with increased DOS. Therefore, the selectively photocatalytic CO yield of VBi-BiOBr nanosheets in pure water was 20.1 μmol g−1 h−1, which was much higher than that of BiOBr nanosheets (5.3 μmol g−1 h−1).
Single-Atom Modification
Compared to surficial vacancies, single-atom modification (Figure 1B) enabled by introducing guest atoms was another efficient strategy for surficial modulation of 2D semiconductor nanocrystals. The organized single-atom-modified photocatalysts could exhibit the advantages of single-atom catalysts, such as unsaturated coordination, a unique electronic structure, maximum atom utilization, and clear catalytic sites (Li et al., 2019a). Similar to surficial vacancies, the deposited guest atoms on semiconductor surfaces could act as active sites that could trap photo-induced charge carriers, thereby inhibiting charge carrier recombination and accelerating photocatalytic reaction (Wang et al., 2019). Hence, the single-atom modifications could be applied to regulate the dynamics of photogenerated charge transfer by shortening the charge migration distances and endowing strong interactions between metals and carriers (Gao et al., 2020). For example, the Zeng and Li group designed the single-atom Au-modified black phosphorus (Au1/BP) nanosheet catalyst for the selective oxidation process of methane to methanol (Luo et al., 2021). Under light irradiation, 1O2 generated by Au1/BP could react with water, forming adsorbed P-OH and P-OOH. P-OOH could be easily decomposed to generate •OH, while methane could react with P-OH to be dehydrated to form CH3• and be adsorbed on Au single atoms. Subsequently, •OH reacted with CH3• to generate CH3OH regardless of steric hindrance. In addition, Au single atoms stabilized CH3• against deeper dehydrogenation. Hence, Au1/BP can catalyze the partial oxidation of methane in an aqueous solution with selectivity >99%. The Liu, Song, and Xia group successfully incorporated Co single atoms into the Bi3O4Br atomic layer to construct a Co-Bi3O4Br catalyst (Di et al., 2019a). The introduced Co single atoms were beneficial to charge transfer, carrier separation, adsorption, and activation of CO2. Moreover, they could stabilize the COOH• intermediate and modulate the rate-limiting step from COOH• formation to CO• desorption, which could lower the CO2 activation energy barrier. Utilizing single-atom Co and 2D ultrathin Bi3O4Br atomic layers, the photocatalyst could achieve a highly efficient photocatalytic CO2 conversion with a selective CO generation rate of 107.1 μmol g−1 h−1, which was approximately 4 and 32 times higher than that of atomic layer Bi3O4Br and bulk Bi3O4Br, respectively.
Meanwhile, the tunable surficial structure of the support materials could provide different coordination environments for guest atoms so that the geometric and electronic structures of these active sites would be tuned through the metal–support interaction, thereby changing the adsorption and strength of reactants, intermediates, or products (Gawande et al., 2020; Mitchell and Pérez-Ramírez, 2020). The Xiong group designed the partially oxidized graphene nanosheets (Co1-G) with single-atom Co sites and realized the highly selective photocatalytic conversion of CO2 to CO (Gao et al., 2018). The strong interaction between single-atom Co sites and supports could change the charge state of Co single atoms, thereby affecting the ability to activate CO2 molecules. Under the assistance of [Ru(bpy)3]Cl2, the turnover number (TON) for CO production reached a high value of 678 and the turnover frequency reached an unprecedented 3.77 min−1. TON was almost identical when the Co loading varied from 0.3 to 1.2 wt%, which indicated that each individual Co atom had been fully utilized as a photocatalytic site for CO2 reduction. The Fu, Jiang, and Zhang group reported the coordination of Cu atoms with N in C3N4 (Cu-Nx) by thermal polymerization (Xiao et al., 2020). X-ray absorption spectroscopy combined with theoretical simulation displayed that each Cu atom could coordinate with three N atoms in one C3N4 layer or four N atoms in two adjacent C3N4 layers, forming two different types of Cu-Nx as efficient charge transport channels to promote rapid charge transfer. The catalyst exhibited an excellent visible light catalytic hydrogen evolution performance (212 mol h−1/0.02 g catalyst), which was 30 times higher than that of bulk C3N4. Additionally, the yield of benzene oxidation under visible light catalysis was 92.3%, and the selectivity reached 99.9%.
Dual-Site Components
Compared to the aforementioned single-site modulation by vacancies and single atomic modification, surficial active sites coupling with other coordinated sites (Figure 1C), namely, dual-site component catalysts, were also reported by many groups, which generally exhibited higher selectivity because of the mediated work function, Fermi energy, and synergistic effects between the two components (Sankar et al., 2012). In this section, two main dual-site components were introduced, including metal–metal sites and metal–vacancy sites.
As for metal–metal sites, the engineered interatomic distances and reduced orbital overlap could induce the modulation in the band structure, affecting the density of states of the d-band and its position relative to the Fermi level (Rosseler et al., 2015). Therefore, the adsorption properties and reactivity of dual-metal component catalysts were different from those of single-atom modifications. Additionally, the dual-metal structure facilitates electron transfer between the two metal moieties, thereby further improving electron–hole separation (Ding et al., 2018). A representative study by the Sun and Xie group reported the synthesis of dual-metal site CuIn5S8 ultrathin nanosheets, which changed the intermediate configuration of the key reaction and adjusted the reaction barrier, thereby changing the reaction path and realizing the highly selective conversion of CO2 to CH4 (Li et al., 2019b). Both theoretical simulations and in situ infrared spectroscopy confirmed that the low-coordinated Cu and In sites could interact with CO2 molecules to form the extremely stable Cu-CO-In intermediate. Breaking the Cu-C bond and In-O bonds simultaneously needed to overcome a high reaction energy barrier to form free-state CO molecules. However, the reaction of hydrogenation on the C atom of this intermediate to form the CHO intermediate was exothermic and could proceed spontaneously. Photocatalytic experiments confirmed that the sulfur-defective CuIn5S8 ultrathin nanosheets could reduce CO2 to CH4 with close to 100% selectivity and an average yield of 8.7 μmol g−1 h−1 driven by visible light. Dual-metal alloy-modified photocatalysts could also exhibit improved catalytic performance (Tahir et al., 2017; Majeed et al., 2018), such as Pd-Au-modified g-C3N4 reported by the Feng group (Wang Z. et al., 2020). By regulating the proportion of Pd and Ag, the yields of CO and CH4 were adjusted, and selective conversion characteristics and high productivity could be achieved. The Santo group synthesized the dual-metal Au-Pt/TiO2 photocatalyst. Using ethanol as a sacrificial reagent, the obtained materials exhibited good hydrogen yields under both ultraviolet A and more sustainable simulated sunlight (Gallo et al., 2012). The interaction between Pt and Au led to a reduction in the strength of the metal–hydrogen bond, which means easier desorption of H2 from the metal surface and an enhanced electron capture capability of the materials.
Different from dual-metal components, single-atom modifications by introducing guest atoms could simultaneously generate surficial vacancies, forming metal-defect sites, which could further improve the performance and selectivity of photocatalysis due to the coupling effects. A recent study by the Zhang group reported that an engineered sulfide photocatalyst with surficial single atoms and vacancies exhibited a high-efficiency overall water splitting performance, which was obtained through a simple aqueous cation-exchange reaction between a 2D ZnIn2S4 monolayer and Ag+ (Pan et al., 2021). The vacancies in the Ag-ZnIn2S4 photocatalyst could act as the active centers, and the surficial isolated Ag atoms and their surrounding coordination environment could provide higher adsorption energy of H2O and OH−, promote the water oxidation process, and help to inhibit the light corrosion of the sulfide photocatalyst through holes. The dual-site synergistic effect served as the active site for overall water oxidation and reduction and realized extremely stable performance of photocatalytic overall water splitting without a co-catalyst. The Deskins group investigated the effects of surface oxygen vacancies and photoexcited electrons on the photocatalytic performance of TiO2-loaded Cu single atoms by DFT calculations and experiments (Chen et al., 2018). The single-atom Cu centers near the VOs had high selectivity for bent CO2 formation, which was beneficial to CO2 activation. In addition, the electron-rich nature of the single-atom Cu centers near the VOs increased the adsorption energy of CO2 at these sites, thereby accelerating the dissociation of CO2. However, Cu single atoms supported on the vacancy-free TiO2 surface did not exhibit the above properties. The presence of photoexcited electrons significantly increased the reaction rate on the surface of the TiO2 photocatalyst with Cu single atoms. In the absence of photoexcited electrons, the Cu/TiO2 surface was essentially inert. These results demonstrated that Cu single atoms, surface VOs, and photoexcited electrons work together to achieve high-efficiency and high-selectivity CO2 reduction.
Conclusion and Perspective
In this mini-review, three surficial modulation strategies, namely, surficial vacancies, single-atom modulation, and dual-site components, are introduced for 2D semiconductor nanocrystal photocatalysts. These surficial modulation strategies have a positive impact on tuning key steps of photocatalytic reactions, such as enlarging the light absorption region, promoting electron–hole separation and transport, and facilitating gas adsorption and activation processes.
However, there are still many challenges for surficial modulation strategies for 2D semiconductor nanocrystal photocatalysts: 1) the leading reason for the enhancement of photocatalytic performance of 2D nanocrystals after surficial modulation needs more systematic and accurate test methods. Modulation of nanocrystals will cause changes in the overall properties of nanocrystals, but how to demonstrate the dominant reason needs more accurate research. 2) The explorations of the active sites and intermediate products require more detailed in situ characterizations such as in situ infrared, X-ray photoelectron spectroscopy, surface-enhanced Raman spectroscopy, etc., to further investigate the mechanism of photocatalysis. 3) A high density of surficial active sites could bring high catalytic activity, but the high loading of single atoms or defects could inevitably lead to aggregate or decomposition. Hence, how to maintain the stability of the photocatalyst is another important scientific issue. 4) Taking advantage of the photogenerated free radicals during photocatalytic reactions, realizing catalytic reactions which are difficult to be realized by conventional industrial catalysis could be an important direction for the future.
Author Contributions
XL and JZ supervised the project. SZ wrote and edited the manuscript. XL revised the manuscript and provided financial support. All authors listed approved it for publication and had made a substantial and intellectual contribution to this work.
Funding
This work was supported by the National Natural Science Foundation of China (22105116 and 51872030), the Beijing Institute of Technology Research Fund Program for Young Scholars, and the China Postdoctoral Science Foundation (2020M670282).
Conflict of Interest
The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest.
Publisher’s Note
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors, and the reviewers. Any product that may be evaluated in this article, or claim that may be made by its manufacturer, is not guaranteed or endorsed by the publisher.
References
Aggarwal, M., Basu, S., Shetti, N. P., Nadagouda, M. N., Kwon, E. E., Park, Y.-K., et al. (2021). Photocatalytic Carbon Dioxide Reduction: Exploring the Role of Ultrathin 2D Graphitic Carbon Nitride (G-C3N4). Chem. Eng. J. 425, 131402. doi:10.1016/j.cej.2021.131402
Bai, S., Wang, L., Li, Z., and Xiong, Y. (2017). Facet-engineered Surface and Interface Design of Photocatalytic Materials. Adv. Sci. 4 (1), 1600216. doi:10.1002/advs.201600216
Chen, J., Iyemperumal, S. K., Fenton, T., Carl, A., Grimm, R., Li, G., et al. (2018). Synergy between Defects, Photoexcited Electrons, and Supported Single Atom Catalysts for CO2 Reduction. ACS Catal. 8 (11), 10464–10478. doi:10.1021/acscatal.8b02372
Chen, Q., Wang, H., Wang, C., Guan, R., Duan, R., Fang, Y., et al. (2020). Activation of Molecular Oxygen in Selectively Photocatalytic Organic Conversion upon Defective TiO2 Nanosheets with Boosted Separation of Charge Carriers. Appl. Catal. B: Environ. 262, 118258. doi:10.1016/j.apcatb.2019.118258
Di, J., Chen, C., Yang, S.-Z., Chen, S., Duan, M., Xiong, J., et al. (2019a). Isolated Single Atom Cobalt in Bi3O4Br Atomic Layers to Trigger Efficient CO2 Photoreduction. Nat. Commun. 10 (1), 2840. doi:10.1038/s41467-019-10392-w
Di, J., Chen, C., Zhu, C., Song, P., Xiong, J., Ji, M., et al. (2019b). Bismuth Vacancy-Tuned Bismuth Oxybromide Ultrathin Nanosheets toward Photocatalytic CO2 Reduction. ACS Appl. Mater. Inter. 11 (34), 30786–30792. doi:10.1021/acsami.9b08109
Ding, J., Li, X., Chen, L., Zhang, X., and Tian, X. (2018). Photocatalytic Hydrogen Production over Plasmonic AuCu/CaIn2S4 Composites with Different AuCu Atomic Arrangements. Appl. Catal. B: Environ. 224, 322–329. doi:10.1016/j.apcatb.2017.10.045
Gallo, A., Marelli, M., Psaro, R., Gombac, V., Montini, T., Fornasiero, P., et al. (2012). Bimetallic Au-Pt/TiO2 Photocatalysts Active under UV-A and Simulated Sunlight for H2 Production from Ethanol. Green. Chem. 14 (2), 330–333. doi:10.1039/C2GC16112E
Gao, C., Wang, J., Xu, H., and Xiong, Y. (2017). Coordination Chemistry in the Design of Heterogeneous Photocatalysts. Chem. Soc. Rev. 46 (10), 2799–2823. doi:10.1039/c6cs00727a
Gao, C., Chen, S., Wang, Y., Wang, J., Zheng, X., Zhu, J., et al. (2018). Heterogeneous Single‐Atom Catalyst for Visible‐Light‐Driven High‐Turnover CO2 Reduction: The Role of Electron Transfer. Adv. Mater. 30 (13), 1704624. doi:10.1002/adma.201704624
Gao, C., Low, J., Long, R., Kong, T., Zhu, J., and Xiong, Y. (2020). Heterogeneous Single-Atom Photocatalysts: Fundamentals and Applications. Chem. Rev. 120 (21), 12175–12216. doi:10.1021/acs.chemrev.9b00840
Gawande, M. B., Fornasiero, P., and Zbořil, R. (2020). Carbon-based Single-Atom Catalysts for Advanced Applications. ACS Catal. 10 (3), 2231–2259. doi:10.1021/acscatal.9b04217
Hui, J., Zhang, G., Ni, C., and Irvine, J. T. S. (2017). Promoting Photocatalytic H2 Evolution by Tuning Cation Deficiency in La and Cr Co-doped SrTiO3. Chem. Commun. 53 (72), 10038–10041. doi:10.1039/C7CC05144A
Jiao, X., Chen, Z., Li, X., Sun, Y., Gao, S., Yan, W., et al. (2017). Defect-Mediated Electron-Hole Separation in One-Unit-Cell ZnIn2S4 Layers for Boosted Solar-Driven CO2 Reduction. J. Am. Chem. Soc. 139 (22), 7586–7594. doi:10.1021/jacs.7b02290
Jo, Y. K., Lee, J. M., Son, S., and Hwang, S.-J. (2019). 2D Inorganic Nanosheet-Based Hybrid Photocatalysts: Design, Applications, and Perspectives. J. Photochem. Photobiol. C Photochem. Rev. 40, 150–190. doi:10.1016/j.jphotochemrev.2018.03.002
Kong, X. Y., Tong, T., Ng, B.-J., Low, J., Zeng, T. H., Mohamed, A. R., et al. (2020). Topotactic Transformation of Bismuth Oxybromide into Bismuth Tungstate: Bandgap Modulation of Single-Crystalline {001}-Faceted Nanosheets for Enhanced Photocatalytic CO2 Reduction. ACS Appl. Mater. Inter. 12 (24), 26991–27000. doi:10.1021/acsami.9b15950
Li A, A., Zhu, W., Li, C., Wang, T., and Gong, J. (2019). Rational Design of Yolk-Shell Nanostructures for Photocatalysis. Chem. Soc. Rev. 48 (7), 1874–1907. doi:10.1039/C8CS00711J
Li, H., Tu, W., Zhou, Y., and Zou, Z. (2016). Z‐Scheme Photocatalytic Systems for Promoting Photocatalytic Performance: Recent Progress and Future Challenges. Adv. Sci. 3 (11), 1500389. doi:10.1002/advs.201500389
Li, X., Yu, J., Jaroniec, M., and Chen, X. (2019a). Cocatalysts for Selective Photoreduction of CO2 into Solar Fuels. Chem. Rev. 119 (6), 3962–4179. doi:10.1021/acs.chemrev.8b00400
Li, X., Sun, Y., Xu, J., Shao, Y., Wu, J., Xu, X., et al. (2019b). Selective Visible-Light-Driven Photocatalytic CO2 Reduction to CH4 Mediated by Atomically Thin CuIn5S8 Layers. Nat. Energ. 4 (8), 690–699. doi:10.1038/s41560-019-0431-1
Luo, L., Luo, J., Li, H., Ren, F., Zhang, Y., Liu, A., et al. (2021). Water Enables Mild Oxidation of Methane to Methanol on Gold Single-Atom Catalysts. Nat. Commun. 12 (1), 1218. doi:10.1038/s41467-021-21482-z
Majeed, I., Manzoor, U., Kanodarwala, F. K., Nadeem, M. A., Hussain, E., Ali, H., et al. (2018). Pd-Ag Decorated G-C3N4 as an Efficient Photocatalyst for Hydrogen Production from Water under Direct Solar Light Irradiation. Catal. Sci. Technol. 8 (4), 1183–1193. doi:10.1039/C7CY02219K
Mitchell, S., and Pérez-Ramírez, J. (2020). Single Atom Catalysis: a Decade of Stunning Progress and the Promise for a Bright Future. Nat. Commun. 11 (1), 4302. doi:10.1038/s41467-020-18182-5
Pan, R., Hu, M., Liu, J., Li, D., Wan, X., Wang, H., et al. (2021). Two-dimensional All-In-One Sulfide Monolayers Driving Photocatalytic Overall Water Splitting. Nano Lett. 21 (14), 6228–6236. doi:10.1021/acs.nanolett.1c02008
Rosseler, O., Ulhaq-Bouillet, C., Bonnefont, A., Pronkin, S., Savinova, E., Louvet, A., et al. (2015). Structural and Electronic Effects in Bimetallic PdPt Nanoparticles on TiO2 for Improved Photocatalytic Oxidation of CO in the Presence of Humidity. Appl. Catal. B: Environ. 166-167, 381–392. doi:10.1016/j.apcatb.2014.12.001
Sankar, M., Dimitratos, N., Miedziak, P. J., Wells, P. P., Kiely, C. J., and Hutchings, G. J. (2012). Designing Bimetallic Catalysts for a green and Sustainable Future. Chem. Soc. Rev. 41 (24), 8099–8139. doi:10.1039/C2CS35296F
Sun, X., Luo, X., Zhang, X., Xie, J., Jin, S., Wang, H., et al. (2019). Enhanced Superoxide Generation on Defective Surfaces for Selective Photooxidation. J. Am. Chem. Soc. 141 (9), 3797–3801. doi:10.1021/jacs.8b13051
Sun, X., Zhang, X., and Xie, Y. (2020). Surface Defects in Two-Dimensional Photocatalysts for Efficient Organic Synthesis. Matter 2 (4), 842–861. doi:10.1016/j.matt.2020.02.006
Tahir, M., Tahir, B., and Amin, N. A. S. (2017). Synergistic Effect in Plasmonic Au/Ag alloy NPs Co-coated TiO2 NWs toward Visible-Light Enhanced CO2 Photoreduction to Fuels. Appl. Catal. B: Environ. 204, 548–560. doi:10.1016/j.apcatb.2016.11.062
Tan, C., Cao, X., Wu, X.-J., He, Q., Yang, J., Zhang, X., et al. (2017). Recent Advances in Ultrathin Two-Dimensional Nanomaterials. Chem. Rev. 117 (9), 6225–6331. doi:10.1021/acs.chemrev.6b00558
Tang, J.-Y., Kong, X. Y., Ng, B.-J., Chew, Y.-H., Mohamed, A. R., and Chai, S.-P. (2019). Midgap-state-mediated Two-step Photoexcitation in Nitrogen Defect-Modified G-C3N4 Atomic Layers for superior Photocatalytic CO2 Reduction. Catal. Sci. Technol. 9 (9), 2335–2343. doi:10.1039/C9CY00449A
Tian, Z., Han, C., Zhao, Y., Dai, W., Lian, X., Wang, Y., et al. (2021). Efficient Photocatalytic Hydrogen Peroxide Generation Coupled with Selective Benzylamine Oxidation over Defective ZrS3 Nanobelts. Nat. Commun. 12 (1), 2039. doi:10.1038/s41467-021-22394-8
Wang, B., Cai, H., and Shen, S. (2019). Single Metal Atom Photocatalysis. Small Methods 3 (9), 1800447. doi:10.1002/smtd.201800447
Wang, H., Liu, W., He, X., Zhang, P., Zhang, X., and Xie, Y. (2020a). An Excitonic Perspective on Low-Dimensional Semiconductors for Photocatalysis. J. Am. Chem. Soc. 142 (33), 14007–14022. doi:10.1021/jacs.0c06966
Wang, Z., Lee, H., Chen, J., Wu, M., Leung, D. Y. C., Grimes, C. A., et al. (2020b). Synergistic Effects of Pd-Ag Bimetals and G-C3N4 Photocatalysts for Selective and Efficient Conversion of Gaseous CO2. J. Power Sourc. 466, 228306. doi:10.1016/j.jpowsour.2020.228306
Xiao, X., Gao, Y., Zhang, L., Zhang, J., Zhang, Q., Li, Q., et al. (2020). A Promoted Charge Separation/Transfer System from Cu Single Atoms and C3N4 Layers for Efficient Photocatalysis. Adv. Mater. 32 (33), 2003082. doi:10.1002/adma.202003082
Keywords: semiconductor nanocrystals, two-dimensional photocatalysts, surficial modulation, surface vacancies, single-atom modification, dual-site components
Citation: Zhu S, Li X and Zhang J (2022) Atomically Surficial Modulation in Two-Dimensional Semiconductor Nanocrystals for Selective Photocatalytic Reactions. Front. Chem. 10:890287. doi: 10.3389/fchem.2022.890287
Received: 05 March 2022; Accepted: 15 March 2022;
Published: 14 April 2022.
Edited by:
Hadi Nur, State University of Malang, IndonesiaReviewed by:
Leonardo Palmisano, University of Palermo, ItalyCopyright © 2022 Zhu, Li and Zhang. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.
*Correspondence: Xinyuan Li, xinyuanli@bit.edu.cn; Jiatao Zhang, zhangjt@bit.edu.cn