Jiuyang Lin
Qin Chen
Moyuan Cao
Jingwei Hou
Wenyuan Ye- 1Fujian Provincial Engineering Research Center of Rural Waste Recycling Technology, School of Environment and Resources, Fuzhou University, Fuzhou, China
- 2Key Laboratory for Green Chemical Technology of Ministry of Education, School of Chemical Engineering and Technology, Tianjin University, Tianjin, China
- 3School of Chemical Engineering, University of Queensland, St. Lucia, QLD, Australia
- 4Fujian Provincial Key Laboratory of Soil Environmental Health and Regulation, College of Resources and Environment, Fujian Agriculture and Forestry University, Fuzhou, China
Editorial on the Research Topic
Superwetting Interfaces for Oil/Water Separation
Ever-increasing instances of oil spill accidents and the disposal of urban sewage and industrial oily wastewater have become a global challenge that poses a serious threat to the ecosystem (Zhang et al., 2018; Zhao C. et al., 2021). The effective separation of oil and water from these waste streams has drawn increasing attention under the advanced framework of sustainability for wastewater treatment (Lin et al., 2020; Liu et al., 2021). However, conventional methods, including coagulation, centrifuging, sedimentation, air flotation, biological degradation, and membrane technologies, fail to effectively separate oil and water, especially in oil/water emulsion solutions (Yu et al., 2017; Lee et al., 2020; Zhao Y. et al., 2021), compromising the sustainable management of oily wastewaters. Therefore, there is a strong need to develop superwetting interfaces (e.g., superhydrophobic or superhydrophilic interfaces) for effective oil/water separation.
Generally, two prevalent strategies, i.e., reduction in surface energy and surface decoration via nano/micro-structure, are proposed in the design of superhydrophobic interfaces for removing oil in oil/water separation (Zhang et al., 2013; Dalawai et al., 2020). To achieve this goal, great efforts were made to tailor the interface of these superwetting materials. Zhang et al. synthesized alkyl chain grafted-reduced graphene oxide for constructing the superhydrophilic membrane by vacuum filtration. The fabricated membrane showed an acceptable separation efficacy in an n-propanol/water mixture. Khan et al. employed the method of ultrashort femtosecond laser pulses to nanostructures the stainless steel and copper meshes with superhydrophobicity, which yielded a separation efficiency of 98% for an oil/water mixture. Zulfiqar et al. summarized the methods of superhydrophobic interface engineering based on various nanomaterials, such as silica-based and carbon-based nanomaterials. The introduction of these silica-based (e.g., saline-based) and carbon-based nanomaterials onto the material surfaces could enhance the surface roughness with reduced surface energy for effective oil/water separation.
The interfaces with superhydrophilicity are underwater superoleophobic, which would remove water but retain oil. These superhydrophilic interfaces are an important alternative for effective oil/water separation (Shi et al., 2016; Lv et al., 2020). The key challenge to construct the superhydrophilic interfaces is to introduce the hydrophilic group to the interfaces via physical, chemical, or physico-chemical strategies (Zarghami et al., 2019). Bian et al. employed low-cost materials, i.e., filter paper and zeolite layer, which commonly exist in our life or nature for oil/water separation. Due to the inherent microscale porous structure, micro/nanoscale hierarchical rough surface texture, and hydrophilic surface properties, these two materials showed strong water-absorption ability, resulting in superhydrophilicity and underwater superoleophobicity without further treatment. Furthermore, the separation efficiency in an oil/water mixture can reach >96.0%, showing great potential in oil/water separation. Zulfiqar et al. also summarized the metal oxide nanoparticles, including iron oxide, titanium oxide, and zinc oxide, to design the superhydrophilic interfaces. This review paper concludes that iron-based oxides can be more competitive, providing the unique advantage of reusability and fast separation due to their magnetic properties. Additionally, Feng and Yong summarized the strategy of femtosecond laser processing for the fabrication of superhydrophilic interfaces. This review paper concludes that femtosecond laser processing can construct superwetting microstructures on diverse materials or membranes by a single-step ablation. However, several challenges should be addressed to satisfy its large-scale practical application.
This Research Topic discusses the latest innovations in the preparation and application of “oil-removing” type materials with superhydrophobicity and superoleophilicity (that selectively filter or absorb oil from oil/water mixtures), “water-removing” type materials with superhydrophilicity and superoleophobicity (that selectively separate water from oil/water mixtures). In the future, superwetting materials will provide a feasible solution in addressing global oil spill accidents and realizing resource recovery from oily industrial wastewaters. The cost-effective strategy of constructing superwetting interfaces with strong durability/stability in extreme environments and the design of practical large separation instruments are two key research directions that should be paid more attention to in the future. Moreover, the separation of high-viscosity crude oils and surfactant stabilized emulsions needs to be considered as well in future research.
Author Contributions
JL, QC, MC, JH, and WY contributed to the writing of this editorial. All the authors contributed to the article and approved the submitted version.
Conflict of Interest
The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest.
References
Dalawai, S. P., Saad Aly, M. A., Latthe, S. S., Xing, R., Sutar, R. S., Nagappan, S., et al. (2020). Recent advances in durability of superhydrophobic self-cleaning technology: a critical review. Progr. Organ. Coat. 138:105381. doi: 10.1016/j.porgcoat.2019.105381
Lee, J., Cho, W., Poo, K., Choi, S., Kim, T., Son, E., et al. (2020). Refractory oil wastewater treatment by dissolved air flotation, electrochemical advanced oxidation process, and magnetic biochar integrated system. J. Water Proc. Eng. 36:101358. doi: 10.1016/j.jwpe.2020.101358
Lin, J., Lin, F., Liu, R., Li, P., Fang, S., Ye, W., et al. (2020). Scalable fabrication of robust superhydrophobic membranes by one-step spray-coating for gravitational water-in-oil emulsion separation. Separat. Purif. Technol. 231:115898. doi: 10.1016/j.seppur.2019.115898
Liu, R., Chen, Q., Cao, M., Lin, J., Lin, F., Ye, W., et al. (2021). Robust bio-inspired superhydrophilic and underwater superoleophobic membranes for simultaneously fast water and oil recovery. J. Membr. Sci. 623:119041. doi: 10.1016/j.memsci.2020.119041
Lv, Y., Ding, Y., Wang, J., He, B., Yang, S., Pan, K., et al. (2020). Carbonaceous microsphere/nanofiber composite superhydrophilic membrane with enhanced anti-adhesion property towards oil and anionic surfactant: membrane fabrication and applications. Separat. Purif. Technol. 235:116189. doi: 10.1016/j.seppur.2019.116189
Shi, H., He, Y., Pan, Y., Di, H., Zeng, G., Zhang, L., et al. (2016). A modified mussel-inspired method to fabricate TiO2 decorated superhydrophilic PVDF membrane for oil/water separation. J. Membr. Sci. 506:60–70. doi: 10.1016/j.memsci.2016.01.053
Yu, L., Han, M., and He, F. (2017). A review of treating oily wastewater. Arabian J. Chem. 10:S1913–S1922. doi: 10.1016/j.arabjc.2013.07.020
Zarghami, S., Mohammadi, T., Sadrzadeh, M., and Van der Bruggen, B. (2019). Superhydrophilic and underwater superoleophobic membranes - a review of synthesis methods. Progr. Polym. Sci. 98:101166. doi: 10.1016/j.progpolymsci.2019.101166
Zhang, C., Wu, M., Wu, B., Yang, J., and Xu, Z. (2018). Solar-driven self-heating sponges for highly efficient crude oil spill remediation. J. Mater. Chem. A 6:8880–8885. doi: 10.1039/C8TA02336K
Zhang, W., Shi, Z., Zhang, F., Liu, X., Jin, J., and Jiang, L. (2013). Superhydrophobic and superoleophilic PVDF membranes for effective separation of water-in-oil emulsions with high flux. Adv. Mater. 25:2071–2076. doi: 10.1002/adma.201204520
Zhao, C., Zhou, J., Yan, Y., Yang, L., Xing, G., Li, H., et al. (2021). Application of coagulation/flocculation in oily wastewater treatment: a review. Sci. Total Environ. 765:142795. doi: 10.1016/j.scitotenv.2020.142795
Keywords: oil spill, industrial oily wastewater, superhydrophilicity, superhydrophobicity, oil/water separation
Citation: Lin J, Chen Q, Cao M, Hou J and Ye W (2021) Editorial: Superwetting Interfaces for Oil/Water Separation. Front. Chem. 9:667106. doi: 10.3389/fchem.2021.667106
Received: 12 February 2021; Accepted: 25 February 2021;
Published: 24 March 2021.
Edited and reviewed by: Doo Soo Chung, Seoul National University, South Korea
Copyright © 2021 Lin, Chen, Cao, Hou and Ye. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.
*Correspondence: Wenyuan Ye, ye0508@126.com