Skip to main content

CORRECTION article

Front. Chem. Eng., 10 January 2022
Sec. Computational Methods in Chemical Engineering
Volume 3 - 2021 | https://doi.org/10.3389/fceng.2021.833247
This article is part of the Research Topic Integration and Optimization in the Chemical Process Industry View all 7 articles

Corrigendum: Mass Integration for Rigorous Process Modelling: A Sequential Approach for Direct Recycling

This article is a correction to:

  1. Mass Integration for Rigorous Process Modelling: A Sequential Approach for Direct Recycling

    1. Read original article
Filippo MarchioneFilippo Marchione1Konrad HungerbuehlerKonrad Hungerbuehler1Stavros Papadokonstantakis Stavros Papadokonstantakis2*
  • 1ETHZ, Department of Chemistry and Applied Biosciences, Zurich, Switzerland
  • 2TU Wien, Institute of Chemical, Environmental and Bioscience Engineering, Vienna, Austria

A corrigendum on
Mass Integration for Rigorous Process Modelling: A Sequential Approach for Direct Recycling

by Marchione, F., Hungerbuehler, K., and Papadokonstantakis, S. (2021). Front. Chem. Eng. 3:785179. doi:10.3389/fceng.2021.785179

In the original article, the funder “TU Wien Bibliothek, Open Access Funding Program” for author Stavros Papadokonstantakis was mistakenly omitted from the Acknowledgements statement. The updated Acknowledgments statement is shown below.

The authors apologize for this error and state that this does not change the scientific conclusions of the article in any way. The original article has been updated.

Publisher’s Note

All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article, or claim that may be made by its manufacturer, is not guaranteed or endorsed by the publisher.

Acknowledgments

The authors acknowledge TU Wien Bibliothek for financial support through its Open Access Funding Program.

Keywords: process integration, process simulation, preemptive goal programming, nonlinear optimization, Aspen Plus simulation

Citation: Marchione F, Hungerbuehler K and Papadokonstantakis S (2022) Corrigendum: Mass Integration for Rigorous Process Modelling: A Sequential Approach for Direct Recycling. Front. Chem. Eng. 3:833247. doi: 10.3389/fceng.2021.833247

Received: 10 December 2021; Accepted: 13 December 2021;
Published: 10 January 2022.

Approved by:

Frontiers Editorial Office, Frontiers Media SA, Switzerland

Copyright © 2022 Marchione, Hungerbuehler and Papadokonstantakis. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.

*Correspondence: Stavros Papadokonstantakis, stavros.papadokonstantakis@tuwien.ac.at

Disclaimer: All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.