Skip to main content

ERRATUM article

Front. Built Environ., 21 December 2022
Sec. Structural Sensing, Control and Asset Management

Erratum: Method for estimating tension of two Nielsen–Lohse bridge cables with intersection clamp connection and unknown boundary conditions

 Frontiers Production Office
Frontiers Production Office*
  • Frontiers Media SA, Lausanne, Switzerland

Due to a production error, the reference for “Furukawa et al. (2022d)” was incorrectly written as “Furukawa, A., Yamada, S., and Kobayashi, R. (2022d). Tension estimation methods for Nielsen-Lohse bridges using out-of-plane and in-plane natural frequencies. Int. J. GEOMATE 12 (2). 603857. doi:10.1007/s13349-022-00548-6.” It should be “Furukawa, A., Yamada, S., and Kobayashi, R. (2022d). Tension estimation methods for Nielsen-Lohse bridges using out-of-plane and in-plane natural frequencies. Int. J. GEOMATE 12 (2). 603857. doi:10.21660/2022.97.3235.”

The publisher apologizes for this mistake. The original version of this article has been updated.

Keywords: cable tension estimation, intersection clamp, Nielsen-Lohse bridge, natural frequency, unknown boundary condition, rotational stiffness, field experiment

Citation: Frontiers Production Office (2022) Erratum: Method for estimating tension of two Nielsen–Lohse bridge cables with intersection clamp connection and unknown boundary conditions. Front. Built Environ. 8:1124048. doi: 10.3389/fbuil.2022.1124048

Received: 14 December 2022; Accepted: 14 December 2022;
Published: 21 December 2022.

Approved by:

Frontiers Editorial Office, Frontiers Media SA, Switzerland

Copyright © 2022 Frontiers Production Office. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.

*Correspondence: Frontiers Production Office, cHJvZHVjdGlvbi5vZmZpY2VAZnJvbnRpZXJzaW4ub3Jn

Disclaimer: All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.