Skip to main content

ORIGINAL RESEARCH article

Front. Bioeng. Biotechnol., 01 March 2024
Sec. Biomechanics
This article is part of the Research Topic Biomechanics in Orthopaedic Diseases and Surgery View all 29 articles

Long-term continuous instrumented insole-based gait analyses in daily life have advantages over longitudinal gait analyses in the lab to monitor healing of tibial fractures

  • 1Werner Siemens-Endowed Chair for Innovative Implant Development (Fracture Healing), Departments and Institutes of Surgery, Saarland University, Homburg, Germany
  • 2German Research Center for Artificial Intelligence (DFKI), Saarbrücken, Germany
  • 3Department of Trauma, Hand and Reconstructive Surgery, Departments and Institutes of Surgery, Saarland University, Homburg, Germany

Introduction: Monitoring changes in gait during rehabilitation allows early detection of complications. Laboratory-based gait analyses proved valuable for longitudinal monitoring of lower leg fracture healing. However, continuous gait data recorded in the daily life may be superior due to a higher temporal resolution and differences in behavior. In this study, ground reaction force-based gait data of instrumented insoles from longitudinal intermittent laboratory assessments were compared to monitoring in daily life.

Methods: Straight walking data of patients were collected during clinical visits and in between those visits the instrumented insoles recorded all stepping activities of the patients during daily life.

Results: Out of 16 patients, due to technical and compliance issues, only six delivered sufficient datasets of about 12 weeks. Stance duration was longer (p = 0.004) and gait was more asymmetric during daily life (asymmetry of maximal force p < 0.001, loading slope p = 0.001, unloading slope p < 0.001, stance duration p < 0.001).

Discussion: The differences between the laboratory assessments and the daily-life monitoring could be caused by a different and more diverse behavior during daily life. The daily life gait parameters significantly improved over time with union. One of the patients developed an infected non-union and showed worsening of force-related gait parameters, which was earlier detectable in the continuous daily life gait data compared to the lab data. Therefore, continuous gait monitoring in the daily life has potential to detect healing problems early on. Continuous monitoring with instrumented insoles has advantages once technical and compliance problems are solved.

1 Introduction

Bone healing is a process that requires appropriate biomechanical conditions (Barcik and Epari, 2021) and blood supply (Lu et al., 2007; Keramaris et al., 2008), and involves numerous cells and molecular mechanisms (Saul et al., 2023). Long-bone fractures fail to heal in up to 5%–10% of cases (Zura et al., 2016). Methods to monitor progress in fracture healing that are routinely used in clinical practice today include the clinical impression, questionnaires, and infrequent radiographic imaging (Mundi et al., 2020). However, none of these methods reliably allows early prediction of non-unions or delays in healing, and the timely start of an intervention (Blokhuis et al., 2001; Ganse et al., 2022). Possible interventions include the application of low-intensity pulsed ultrasound (Leung et al., 2004), extracorporeal shock-wave therapy (Searle et al., 2023), magnetic fields (Ribeiro et al., 2023), or revision surgery (Giannoudis et al., 2015). When healing delays occur, rehabilitation times are often extensive, immobilization can last several months, and there are massive negative socio-economic and psychological effects (Simpson and Tsang, 2017).

In the last few years, the number of studies that used gait analysis to monitor fracture healing has increased (Bennett et al., 2021; Larsen et al., 2021; Kröger et al., 2022). For longitudinal monitoring of the healing progress, spatiotemporal gait parameters, kinematics, kinetics, and pedography-parameters were suitable (Warmerdam et al., 2023). Gait analysis can allow for better fracture healing monitoring, as well as timely individualized rehabilitation and treatment. Particularly, changes in gait speed and asymmetry measures have great potential to indicate problems in fracture healing in a more objective and timelier manner (Warmerdam et al., 2023). However, these supervised lab assessments take place in an artificial setting where patients are aware that they are being observed, and therefore patients may not show their usual gait pattern (Brodie et al., 2016; Warmerdam et al., 2020). It is known that gait parameters, such as gait speed and step length are lower when measured during daily life, whereas temporal gait parameters are higher compared to lab assessments (Warmerdam et al., 2020).

In the last decade, many instrumented insoles were developed to monitor gait (Ngueleu et al., 2019; Wang et al., 2019; Ma et al., 2023). With recent technological advances, it has become possible to collect gait data continuously during daily life. It is now possible to conduct measurements in a more natural context throughout the rehabilitation period (Braun et al., 2017). Improvements in battery life and data storage capacity, durability, usability, hysteresis and drift, and higher sample frequencies made long-term measurements with a high time resolution possible (Elstub et al., 2022; Subramaniam et al., 2022; Wolff et al., 2023). A recording frequency of 25 Hz and more allows for analyses of the vertical ground reaction force curve with its characteristic two maxima and in-between minimum during the stance-phase (Wolff et al., 2023). With lower recording frequencies, such as of the insoles typically used to continuously monitor patients with diabetes in their daily lives, such analyses were previously not possible. With lower recording frequencies, peak force spikes were missed (Abbott et al., 2019).

We conducted a longitudinal prospective observational clinical trial to compare insole-based lab assessments with continuous recordings from the daily life in patients throughout the healing phase after tibial fractures. Our hypotheses were i) That differences exist between measurements in the lab compared to continuous recordings during the daily life of patients, that ii) The daily life gait data improve over time, and that iii) Long-term continuous measurements can deliver high-resolution data to monitor the healing process in more detail.

2 Material and methods

The prospective cohort study is part of the project Smart Implants 2.0—Weight-bearing and Gait Observation for Early Monitoring of Fracture Healing and Individualized Therapy after Trauma, funded by the Werner Siemens Foundation. It was registered in the German Clinical Trials Register (DRKS-ID: DRKS00025108). Ethical approval was obtained from the IRB of Saarland Medical Board (Ärztekammer des Saarlandes, Germany, application number 30/21). The study was conducted with oral and written informed consent according to the newest version of the Declaration of Helsinki. In this observational study, measurements in the lab were only conducted during inpatient stays and when outpatient clinic appointments were scheduled anyway to not alter the frequency of consultations and degree of care. All patients enrolled in this study received both types of measurements simultaneously, longitudinal intermittent measurements in the lab with every inpatient or outpatient stay in the hospital, and continuous daily life measurements throughout the first 3 months after fracture.

2.1 Inclusion and exclusion criteria

Recruitment took place in a monocenter study at Saarland University Hospital in Germany between February 2022 and June 2023. Inclusion criteria were patients of 18 years or more of both sexes with tibial fractures. Exclusion criteria were age under 18 years, immobility already before the fracture event, use of walking aid prior to the fracture, inability to give consent, further major injuries of the lower extremities in addition to the tibial fracture, alcohol or drug abuse, pregnancy, and participation in another ongoing clinical study within the past month or less.

2.2 Measurements in the lab

Instrumented pedography insoles (OpenGO, Moticon GmbH, Munich, Germany) equipped with 16 pressure sensors were matched for shoe size of the patient and calibrated to the patient’s body weight. Data were recorded with 100 Hz from both feet with one insole in each shoe. The insole sensors have a resolution of 0.25N/cm2 and are known to underestimate the extrema in the force data by −3.7% to −1.1% at 100 Hz (Cramer et al., 2022). All patients were asked to walk straight for 10 m. Ten steps in the middle part of the walk were extracted for data analysis. Only the vertical ground reaction force data were taken into account. The force values are around zero at the beginning and the end of the stance phase. There are generally two maxima with one minimum in between during walking. The first maximum represents the loading force, the minimum represents the mid-stance phase and the second maximum represents the push-off force (Figure 1).

FIGURE 1
www.frontiersin.org

FIGURE 1. Vertical ground reaction force curve of a stance phase during walking.

2.3 Measurements during the daily life

During the day life, the same insoles were used for the measurements, but data were recorded at a rate of 25 Hz. Due to limited data storage capacity, 25 Hz is the maximum recording frequency these insoles provide for continuous measurements. The data are primarily stored on the insoles, and patients need to actively conduct data transfer to a smartphone using an app once daily. In addition, the insole batteries need to be changed and charged on a daily basis. Patients were trained to use the insoles, store the data, and charge and change the batteries. The insoles were activated the entire time all day and night, and they recorded every activity when worn. Only stepping activities were extracted from the data for analysis, however no distinctions were made between different types of walking, e.g., indoor, outdoor, stairs.

2.4 Data processing

As the initial processing step, stance phases of the gait cycles were identified and extracted from the time-series data. Stance phases were determined by considering any activity with consecutive ground reaction force readings above 30 N. To account for possible recording-device faults, a tolerance of up to three missing values was allowed. Additionally, load-bearing activities lasting less than 300 ms or more than 3500 ms were discarded. These thresholds were arbitrarily chosen after exploring the data.

To ensure comparability between subjects and steps, the force was normalized to the body weight of the patients and the time to the duration of the stance phase using equidistant subsampling on a Cubic Spline interpolation. Because of the low recording frequency and the sensor noise, a Gaussian filter (Sigma = 3, kernel size 7) was applied to the raw data. Where using the filtered data still resulted in inconclusive extremum candidates, we implemented additional detection strategies in the following order: First, extremum candidates occurring within the first or last 10% of the stance phase were eliminated. Then, events in the second half of the stance phase were eliminated as candidates for the first maximum and vice versa for the second. This check split the maxima candidates into two groups for first and second maximum candidates, respectively. Next, if multiple extremum candidates occurred within a pool size of 5% of the stance phase or either group contained one candidate with a force reading greater than all other candidates within the group by a factor of 1.05, this candidate with the highest force value was selected. If this procedure delivered too few candidates, previous eliminations were reinstated based on their highest achieved monotony distance, until the desired number of candidates was reached.

Any stance activity that after the application of these strategies during step detection had an irregular number of unambiguous extremum candidates was classified as a non-step event and subsequently removed from the dataset. From all detected steps, the maximal force and stance duration were extracted from the raw data. The loading slope and unloading slope were only extracted when there were two maxima during the stance phase. Daily averages were calculated for these parameters. For the analysis of the average gait parameters, only the values of the injured side were used. The asymmetry of the four parameters was calculated with data of the injured and the healthy side according to the following equation:

Asymmetry=healthysideinjuredsidehealthyside+injuredside/2*100

An asymmetry value of 0% indicates perfect symmetry. Additionally, the number of steps per day and the average walking bout length were extracted, where both sides were taken into account (Table 1).

TABLE 1
www.frontiersin.org

TABLE 1. Description of the parameters analyzed in this study.

2.5 Statistical analyses

To compare the lab assessments with the continuous daily life data, an average of 7 days of the continuous data was calculated around the time of the lab assessment. All lab data were compared with the matching continuous seven-days-average data. The data were tested for normality with the Shapiro-Wilk test. In case of a normal distribution, a Student’s t-test was used, otherwise a Wilcoxon signed-rank test was used to compare the lab data with continuous data.

To analyze whether the continuous data improved throughout the healing process, the data of the first week, the sixth week and the last week of patients with union were compared with a repeated measures ANOVA with time as a within-patient factor. Post-hoc tests were performed with Bonferroni correction. Significance was assumed at p < 0.05 for all tests.

3 Results

3.1 Enrolment

Thirty-one patients with a tibial shaft or proximal tibial fracture were enrolled in this study between February 2022 and May 2023. Eight patients were not eligible to participate in the continuous measurements and seven patients only took part in the lab assessments, as they were unable to start the continuous measurements for either technical or compliance reasons. Out of the sixteen patients who collected continuous data, only six data sets contained enough data (>6 weeks) to analyze. More detailed information can be found in Figure 2.

FIGURE 2
www.frontiersin.org

FIGURE 2. One Flow chart of patients enrolled in the study with information about the exclusion for the continuous data analysis.

3.2 Intermittent lab vs. continuous daily-life data

Patient characteristics are shown in Table 2 and the lab and continuous gait data are represented in Figure 3. The lab data were compared to the average of 1 week of continuous data around the same days of the lab assessment. The stance duration and all asymmetry parameters were significantly different between walking in the lab and everyday walking (Figure 4).

TABLE 2
www.frontiersin.org

TABLE 2. Patient characteristics.

FIGURE 3
www.frontiersin.org

FIGURE 3. Continuous daily life (solid lines) and lab data (dots connected by dashed lines) with each patient in a different color. The continuous daily-life data are presented as a 3-day moving average. The patient represented with the blue color developed an infected non-union. BW = body weight; T = time. (A) Maximal force, (B) Loading slope, (C) Unloading slope, (D) Stance duration, (E) Asymmetry of the maximal force, (F) Asymmetry of the loading slope, (G) Asymmetry of the unloading slope, (H) Asymmetry of the stance duration.

FIGURE 4
www.frontiersin.org

FIGURE 4. The distribution and boxplot of the lab data (blue) and continuous daily-life data (coral). p-values are written in each subfigure in case of a significant difference. The data in c and d were not normally distributed. (A) Maximal force, (B) Loading slope, (C) Unloading slope, (D) Stance duration, (E) Asymmetry of the maximal force, (F) Asymmetry of the loading slope, (G) Asymmetry of the unloading slope, (H) Asymmetry of the stance duration.

3.3 Changes in gait throughout the healing process of tibial fractures

In patients with union, a repeated measures ANOVA showed that the continuous daily-life data improved significantly during the first 3 months of the healing process, except for the stance duration (Table 3; Figure 3; Figure 5). Post-hoc testing revealed that all parameters that significantly improved showed this improvement between the first and last recorded week. The maximal force, unloading slope and the number of steps per day showed significant improvements during the first and second 6-week periods. Asymmetry of the maximal force decreased significantly during the first 6 weeks only (Table 3).

TABLE 3
www.frontiersin.org

TABLE 3. p-values of repeated measures ANOVA to evaluate changes in parameters from daily life data between the first week, sixth week and last week of data collection of the five patients with union. Post-Hoc tests were performed with Bonferroni correction. Significant p-values are shown in bold.

FIGURE 5
www.frontiersin.org

FIGURE 5. The total number of steps and the average walking bout length per day. Data are presented as a 3-day moving average. The patient represented with the blue color developed an infected non-union. (A) Total number of steps, (B) Average walking bout length.

4 Discussion

The present study showed that the stance duration and the asymmetry parameters were significantly different between lab assessments and continuous daily life monitoring. Only six out of 31 attempts to collect sufficient continuous gait data in the daily life of patients were successful, while the others failed either due to hard- or software, or compliance issues. The data obtained were of high quality and allowed earlier detection of union problems. Thus, continuous monitoring has advantages once technical and compliance problems are solved.

Differences between laboratory-based and continuous daily life measurements were expected based on previous studies that compared similar gait parameters between lab and daily life assessments in healthy (older) adults and several other, mainly neurological, patient groups (Toosizadeh et al., 2015; Del Din et al., 2016; Storm et al., 2018; Hillel et al., 2019; Takayanagi et al., 2019; Van Ancum et al., 2019; Rast et al., 2022). However, in our study, force-related parameters were not significantly different between the lab and the daily life. It appears that during daily life, when patients walk on crutches or still have pain, they focus more on their walking. In patients with hip osteoarthritis during two, three and four-point gait with crutches, forces in the hip joint were 13, 17% and 12% reduced, respectively (Damm et al., 2013). Additionally, gait speed in patients with Parkinson’s disease was lower when walking with a cane compared to walking without walking aids (Bryant et al., 2012). The more focused and cautious gait when using crutches may lead to a higher comparability of everyday life to lab-assessment data. This seems to be the case especially in the first weeks after injury and/or surgery.

The asymmetry was significantly different between lab assessments and continuous monitoring in daily life. In patients with Parkinson’s disease, a significant difference in step length asymmetry was found between lab and daily-life assessments, however, there were no differences in asymmetry of temporal parameters (Del Din et al., 2016). The differences between lab and everyday life assessments could at least partially be due to the variance in environment. In the lab, patients walk in a straight line, where during the daily life patients more often walk along a curved path or turn on the spot, especially when they walk indoors. During outdoor walking, patients might come across different types of surfaces, which might not be as smooth, solid and level as in the lab. This is known to alter the gait pattern and its variability (Thies et al., 2005; Nohelova et al., 2021), but could potentially also have an effect on asymmetry. The disadvantage of daily life assessments is that it is unknown what exactly the patients have done, as movements are not standardized. The step-detection algorithm should only extract steps, but just from the insole data, it cannot be concluded whether someone is stepping around in the kitchen during cooking, is walking outside or is walking on the stairs. It is expected that most detected steps are from ‘regular’ walking (covering a horizontal distance), there will be a certain number of steps that are measured during other activities. Furthermore, non-step load bearing events might falsely present as steps. The fact that all extracted steps were included in the data analysis has probably led to more variability compared to the lab assessment. On the other hand, a greater number of steps was collected and thereby more detailed and realistic information obtained. Depending on what the patients did and how they felt, there may be greater fluctuations, but trends can be identified by averaging the values.

In the present study, gait during the daily life significantly improved throughout the first 3 months after tibial fractures. To the best of our knowledge, only two studies have used pressure-sensing insoles to monitor patients after an injury during their daily life. A feasibility study in patients with ankle fractures showed an increase in force and activity (Braun et al., 2016). In the other study, step count and time spent walking had a larger impact than the maximal force and cadence on patient-reported physical function 1 year after a lower leg fracture (North et al., 2023). Both studies only measured up until 6 weeks after surgery. Since proximal tibial fractures need about 3 months to heal (LI et al., 2023), in the present study patients were monitored for 3 months after surgery.

The larger data quantity from the continuous daily-life data could make it easier to detect healing problems early. One out of the six patients developed a non-union caused by bacterial infection involving the soft tissues and fracture. The last measurement was performed when the patient was readmitted to the hospital because of the infection (70 days after surgery, Figure 3). Especially in the loading and unloading slope of the force curve, a decrease in performance could be seen earlier in the daily-life data compared to the lab data (Figure 3). If the data were stored on a cloud and medical professionals had access to them, they could receive an automatic notification if the performance decreased, as the pattern of change appears to be distinct enough to be detectable by either traditional reasoning approaches or machine learning. The medical professional could closely monitor the data remotely and invite the patient to the clinic earlier to adjust treatment, if necessary.

The insoles require a lot of handling from the patients. Every day, the patients are required to save the data and change and recharge the batteries. Many patients were already overwhelmed by the new situation after their injury and could not handle the extra work they had to put in the insoles. In addition, we experienced a high rate of hardware failure, which led to the approximate consumption of insole hardware with a value of 2,000 to 4,000 Euros per patient in the present study. Out of 23 patients who were eligible to participate in the continuous measurements in their everyday lives, despite our best efforts, only 6 patients collected a data set that was of value to us. Another limitation of measuring with the insoles is that the number of steps per day measured is likely not the total number of steps taken per day. This is the case because the patients might not have worn the insoles all day. Especially at home, they might not walk around with their shoes on. In addition, as the insoles inactivate during breaks and will re-activate only after a few steps, these first few steps will not be recorded. These factors may have affected the average walking bout length and might have had a minor influence on the other gait parameters.

These difficulties in data collection by instrumented insoles may either be overcome when better and more suitable hardware becomes available, or by collecting data via the implant used to treat the fracture itself (Ganse et al., 2022; Windolf et al., 2022). Automated data collection of fracture stiffness via implants may deliver a similar force curve and allow for direct measurements less reliant on patient compliance. In the future, such systems may allow for much more accurate healing prediction and individualized rehabilitation monitoring than the present insole-based approach. Immediate patient feedback systems, such as via alarms (sound, vibration) when weight-bearing restrictions are exceeded may complement the functionalities (Ganse et al., 2016; Abbott et al., 2019).

5 Conclusion

Differences exist between laboratory and continuous assessments, mainly in the gait asymmetry parameters caused by a different and more diverse behavior at home. There were no differences in force-related parameters between laboratory and home measurements, potentially due to more careful gait with crutches, as well as pain. The continuous assessments in the daily life provided gait data with a higher time resolution, which makes it easier to detect changes in performance sooner. Therefore, continuous gait monitoring in the daily life has potential to detect healing problems early on. Future research should focus on finding a more feasible device to monitor patients during daily life, and on the identification of gait parameters that serve to differentiate early between patients with union and patients with healing problems.

Data availability statement

The raw data supporting the conclusion of this article will be made available by the authors, without undue reservation.

Ethics statement

The studies involving humans were approved by the Saarland Medical Board (Ärztekammer des Saarlandes, Germany, application number 30/21). The studies were conducted in accordance with the local legislation and institutional requirements. The participants provided their written informed consent to participate in this study.

Author contributions

EW: Data curation, Formal Analysis, Investigation, Methodology, Software, Visualization, Writing–original draft. CW: Methodology, Software, Validation, Writing–review and editing. MO: Investigation, Writing–review and editing. TP: Conceptualization, Funding acquisition, Writing–review and editing. BG: Conceptualization, Formal Analysis, Investigation, Project administration, Resources, Supervision, Writing–review and editing.

Funding

The author(s) declare financial support was received for the research, authorship, and/or publication of this article. The Werner Siemens Foundation (project Smart Implants 2.0) funded this work.

Acknowledgments

The authors acknowledge the help of Diana Mergen, Jan Kattanek, Lea Burger, Sonja Baumgartner, and Caroline Stoll with patient management.

Conflict of interest

TP is president and board member of the AO Foundation, Switzerland, and extended board member of the German Society of Orthopedic Trauma Surgery (DGU), the German Society of Orthopedic Surgery and Traumatology (DGOU), and the German Society of Surgery (DGCH). TP is also the speaker of the medical advisory board of the German Ministry of Defence.

The remaining authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest.

Publisher’s note

All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article, or claim that may be made by its manufacturer, is not guaranteed or endorsed by the publisher.

References

Abbott, C. A., Chatwin, K. E., Foden, P., Hasan, A. N., Sange, C., Rajbhandari, S. M., et al. (2019). Innovative intelligent insole system reduces diabetic foot ulcer recurrence at plantar sites: a prospective, randomised, proof-of-concept study. Lancet Digit. Health 1, e308–e318. doi:10.1016/s2589-7500(19)30128-1

PubMed Abstract | CrossRef Full Text | Google Scholar

Barcik, J., and Epari, D. R. (2021). Can optimizing the mechanical environment deliver a clinically significant reduction in fracture healing time? Biomedicines 9, 691. doi:10.3390/biomedicines9060691

PubMed Abstract | CrossRef Full Text | Google Scholar

Bennett, K. J., Millar, S. C., Fraysse, F., Arnold, J. B., Atkins, G. J., Solomon, L. B., et al. (2021). Postoperative lower limb joint kinematics following tibial plateau fracture: a 2-year longitudinal study. Gait Posture 83, 20–25. doi:10.1016/j.gaitpost.2020.10.005

PubMed Abstract | CrossRef Full Text | Google Scholar

Blokhuis, T., de Bruine, J., Bramer, J., den Boer, F., Bakker, F., Patka, P., et al. (2001). The reliability of plain radiography in experimental fracture healing. Skelet. Radiol. 30 (3), 151–156. doi:10.1007/s002560000317

PubMed Abstract | CrossRef Full Text | Google Scholar

Braun, B. J., Bushuven, E., Hell, R., Veith, N. T., Buschbaum, J., Holstein, J. H., et al. (2016). A novel tool for continuous fracture aftercare - clinical feasibility and first results of a new telemetric gait analysis insole. Injury 47, 490–494. doi:10.1016/j.injury.2015.11.004

PubMed Abstract | CrossRef Full Text | Google Scholar

Braun, B. J., Veith, N. T., Rollmann, M., Orth, M., Fritz, T., Herath, S. C., et al. (2017). Weight-bearing recommendations after operative fracture treatment—fact or fiction? Gait results with and feasibility of a dynamic, continuous pedobarography insole. Int. Orthop. 41, 1507–1512. doi:10.1007/s00264-017-3481-7

PubMed Abstract | CrossRef Full Text | Google Scholar

Brodie, M. A. D., Coppens, M. J. M., Lord, S. R., Lovell, N. H., Gschwind, Y. J., Redmond, S. J., et al. (2016). Wearable pendant device monitoring using new wavelet-based methods shows daily life and laboratory gaits are different. Med. Biol. Eng. Comput. 54, 663–674. doi:10.1007/s11517-015-1357-9

PubMed Abstract | CrossRef Full Text | Google Scholar

Bryant, M. S., Pourmoghaddam, A., and Thrasher, A. (2012). Gait changes with walking devices in persons with Parkinson’s disease. Disabil. Rehabil. Assist. Technol. 7, 149–152. doi:10.3109/17483107.2011.602461

PubMed Abstract | CrossRef Full Text | Google Scholar

Cramer, L. A., Wimmer, M. A., Malloy, P., O’keefe, J. A., Knowlton, C. B., and Ferrigno, C. (2022). Validity and reliability of the Insole3 instrumented shoe insole for ground reaction force measurement during walking and running. Sensors 22, 2203. doi:10.3390/s22062203

PubMed Abstract | CrossRef Full Text | Google Scholar

Damm, P., Schwachmeyer, V., Dymke, J., Bender, A., and Bergmann, G. (2013). In vivo hip joint loads during three methods of walking with forearm crutches. Clin. Biomech. 28, 530–535. doi:10.1016/j.clinbiomech.2012.12.003

PubMed Abstract | CrossRef Full Text | Google Scholar

Del Din, S., Godfrey, A., Galna, B., Lord, S., and Rochester, L. (2016). Free-living gait characteristics in ageing and Parkinson’s disease: impact of environment and ambulatory bout length. J. Neuroeng Rehabil. 13, 46. doi:10.1186/s12984-016-0154-5

PubMed Abstract | CrossRef Full Text | Google Scholar

Elstub, L. J., Grohowski, L. M., Wolf, D. N., Owen, M. K., Noehren, B., and Zelik, K. E. (2022). Effect of pressure insole sampling frequency on insole-measured peak force accuracy during running. J. Biomech. 145, 111387. doi:10.1016/j.jbiomech.2022.111387

PubMed Abstract | CrossRef Full Text | Google Scholar

Ganse, B., Orth, M., Roland, M., Diebels, S., Motzki, P., Seelecke, S., et al. (2022). Concepts and clinical aspects of active implants for the treatment of bone fractures. Acta Biomater. 146, 1–9. doi:10.1016/j.actbio.2022.05.001

PubMed Abstract | CrossRef Full Text | Google Scholar

Ganse, B., Yang, P. F., Gardlo, J., Gauger, P., Kriechbaumer, A., Pape, H. C., et al. (2016). Partial weight bearing of the tibia. Injury 47, 1777–1782. doi:10.1016/j.injury.2016.06.003

PubMed Abstract | CrossRef Full Text | Google Scholar

Giannoudis, P. V., Gudipati, S., Harwood, P., and Kanakaris, N. K. (2015). Long bone non-unions treated with the diamond concept: a case series of 64 patients. Injury 46, S48–S54. doi:10.1016/S0020-1383(15)30055-3

PubMed Abstract | CrossRef Full Text | Google Scholar

Hillel, I., Gazit, E., Nieuwboer, A., Avanzino, L., Rochester, L., Cereatti, A., et al. (2019). Is every-day walking in older adults more analogous to dual-task walking or to usual walking? Elucidating the gap between gait performance in the lab and during 24/7 monitoring. Eur. Rev. Aging Phys. Activity 16, 6. doi:10.1186/s11556-019-0214-5

PubMed Abstract | CrossRef Full Text | Google Scholar

Keramaris, N. C., Calori, G. M., Nikolaou, V. S., Schemitsch, E. H., and Giannoudis, P. V. (2008). Fracture vascularity and bone healing: a systematic review of the role of VEGF. Injury 39, 45–57. doi:10.1016/S0020-1383(08)70015-9

PubMed Abstract | CrossRef Full Text | Google Scholar

Kröger, I., Müßig, J., Brand, A., Pätzold, R., Wackerle, H., Klöpfer-Krämer, I., et al. (2022). Recovery of gait and function during the first six months after tibial shaft fractures. Gait Posture 91, 66–72. doi:10.1016/j.gaitpost.2021.09.199

PubMed Abstract | CrossRef Full Text | Google Scholar

Larsen, P., Eriksen, C. B., Stokholm, R., and Elsoe, R. (2021). Results following prolonged recovery show satisfactory functional and patient-reported outcome after intramedullary nailing of a tibial shaft fracture: a prospective 5-year follow-up cohort study. Arch. Orthop. Trauma Surg. 141, 1303–1310. doi:10.1007/s00402-020-03608-y

PubMed Abstract | CrossRef Full Text | Google Scholar

Leung, K. S., Lee, W. S., Tsui, H. F., Liu, P. P. L., and Cheung, W. H. (2004). Complex tibial fracture outcomes following treatment with low-intensity pulsed ultrasound. Ultrasound Med. Biol. 30, 389–395. doi:10.1016/j.ultrasmedbio.2003.11.008

PubMed Abstract | CrossRef Full Text | Google Scholar

Li, J., Ali, K. A., Xia, C., Zhu, M., Zhang, W., and Huang, H. (2023). Anterolateral approach for posterolateral tibial plateau fractures. Acta Orthop. Belg 89, 354–361. doi:10.52628/89.2.11211

PubMed Abstract | CrossRef Full Text | Google Scholar

Lu, C., Miclau, T., Hu, D., and Marcucio, R. S. (2007). Ischemia leads to delayed union during fracture healing: a mouse model. J. Orthop. Res. 25, 51–61. doi:10.1002/jor.20264

PubMed Abstract | CrossRef Full Text | Google Scholar

Ma, T., Xu, X., Chai, Z., Wang, T., Shen, X., and Sun, T. (2023). A wearable biofeedback device for monitoring tibial load during partial weight-bearing walking. IEEE Trans. Neural Syst. Rehabilitation Eng. 31, 3428–3436. doi:10.1109/TNSRE.2023.3305205

PubMed Abstract | CrossRef Full Text | Google Scholar

Mundi, R., Axelrod, D., Heels-Ansdell, D., Chaudhry, H., Ayeni, O. R., Petrisor, B., et al. (2020). Nonunion in patients with tibial shaft fractures: is early physical status associated with fracture healing? Cureus 12, e7649. doi:10.7759/cureus.7649

PubMed Abstract | CrossRef Full Text | Google Scholar

Ngueleu, A. M., Blanchette, A. K., Maltais, D., Moffet, H., McFadyen, B. J., Bouyer, L., et al. (2019). Validity of instrumented insoles for step counting, posture and activity recognition: a systematic review. Sensors Switz. 19, 2438. doi:10.3390/s19112438

PubMed Abstract | CrossRef Full Text | Google Scholar

Nohelova, D., Bizovska, L., Vuillerme, N., and Svoboda, Z. (2021). Gait variability and complexity during single and dual-task walking on different surfaces in outdoor environment. Sensors 21, 4792. doi:10.3390/s21144792

PubMed Abstract | CrossRef Full Text | Google Scholar

North, K., Simpson, G. M., Stuart, A. R., Kubiak, E. N., Petelenz, T. J., Hitchcock, R. W., et al. (2023). Early postoperative step count and walking time have greater impact on lower limb fracture outcomes than load-bearing metrics. Injury 54, 110756. doi:10.1016/j.injury.2023.04.043

PubMed Abstract | CrossRef Full Text | Google Scholar

Rast, F. M., Aschwanden, S., Werner, C., Demkó, L., and Labruyère, R. (2022). Accuracy and comparison of sensor-based gait speed estimations under standardized and daily life conditions in children undergoing rehabilitation. J. Neuroeng Rehabil. 19, 105. doi:10.1186/s12984-022-01079-3

PubMed Abstract | CrossRef Full Text | Google Scholar

Ribeiro, T. P., Flores, M., Madureira, S., Zanotto, F., Monteiro, F. J., and Laranjeira, M. S. (2023). Magnetic bone tissue engineering: reviewing the effects of magnetic stimulation on bone regeneration and angiogenesis. Pharmaceutics 15, 1045. doi:10.3390/pharmaceutics15041045

PubMed Abstract | CrossRef Full Text | Google Scholar

Saul, D., Menger, M. M., Ehnert, S., Nüssler, A. K., Histing, T., and Laschke, M. W. (2023). Bone healing gone wrong: pathological fracture healing and non-unions—overview of basic and clinical aspects and systematic review of risk factors. Bioengineering 10, 85. doi:10.3390/bioengineering10010085

PubMed Abstract | CrossRef Full Text | Google Scholar

Searle, H. K. C., Lewis, S. R., Coyle, C., Welch, M., and Griffin, X. L. (2023). Ultrasound and shockwave therapy for acute fractures in adults. Cochrane Database Syst. Rev. 2023. doi:10.1002/14651858.CD008579.pub4

CrossRef Full Text | Google Scholar

Simpson, A. H., and Tsang, J. S. T. (2017). Current treatment of infected non-union after intramedullary nailing. Injury 48, S82–S90. doi:10.1016/j.injury.2017.04.026

PubMed Abstract | CrossRef Full Text | Google Scholar

Storm, F. A., Nair, K. P. S., Clarke, A. J., Van der Meulen, J. M., and Mazzà, C. (2018). Free-living and laboratory gait characteristics in patients with multiple sclerosis. PLoS One 13, 15. e0196463. doi:10.1371/journal.pone.0196463

PubMed Abstract | CrossRef Full Text | Google Scholar

Subramaniam, S., Majumder, S., Faisal, A. I., and Jamal Deen, M. (2022). Insole-based systems for health monitoring: current solutions and research challenges. Sensors 22, 438. doi:10.3390/s22020438

PubMed Abstract | CrossRef Full Text | Google Scholar

Takayanagi, N., Sudo, M., Yamashiro, Y., Lee, S., Kobayashi, Y., Niki, Y., et al. (2019). Relationship between daily and in-laboratory gait speed among healthy community-dwelling older adults. Sci. Rep. 9, 3496. doi:10.1038/s41598-019-39695-0

PubMed Abstract | CrossRef Full Text | Google Scholar

Thies, S. B., Richardson, J. K., and Ashton-Miller, J. A. (2005). Effects of surface irregularity and lighting on step variability during gait:. Gait Posture 22, 26–31. doi:10.1016/j.gaitpost.2004.06.004

PubMed Abstract | CrossRef Full Text | Google Scholar

Toosizadeh, N., Mohler, J., Lei, H., Parvaneh, S., Sherman, S., and Najafi, B. (2015). Motor performance assessment in Parkinson’s disease: association between objective in-clinic, objective in-home, and subjective/semi-objective measures. PLoS One 10, e0124763. doi:10.1371/journal.pone.0124763

CrossRef Full Text | Google Scholar

Van Ancum, J. M., van Schooten, K. S., Jonkman, N. H., Huijben, B., van Lummel, R. C., Meskers, C. G. C., et al. (2019). Gait speed assessed by a 4-m walk test is not representative of daily-life gait speed in community-dwelling adults. Maturitas 121, 28–34. doi:10.1016/j.maturitas.2018.12.008

PubMed Abstract | CrossRef Full Text | Google Scholar

Wang, W., Cao, J., Yu, J., Liu, R., Bowen, C. R., and Liao, W. H. (2019). Self-powered smart insole for monitoring human gait signals. Sensors Switz. 19, 5336. doi:10.3390/s19245336

PubMed Abstract | CrossRef Full Text | Google Scholar

Warmerdam, E., Hausdorff, J. M., Atrsaei, A., Zhou, Y., Mirelman, A., Aminian, K., et al. (2020). Long-term unsupervised mobility assessment in movement disorders. Lancet Neurol. 19, 462–470. doi:10.1016/S1474-4422(19)30397-7

PubMed Abstract | CrossRef Full Text | Google Scholar

Warmerdam, E., Orth, M., Pohlemann, T., and Ganse, B. (2023). Gait analysis to monitor fracture healing of the lower leg. Bioengineering 10, 255. doi:10.3390/bioengineering10020255

PubMed Abstract | CrossRef Full Text | Google Scholar

Windolf, M., Varjas, V., Gehweiler, D., Schwyn, R., Arens, D., Constant, C., et al. (2022). Continuous implant load monitoring to assess bone healing status—evidence from animal testing. Med. Lith. 58, 858. doi:10.3390/medicina58070858

CrossRef Full Text | Google Scholar

Wolff, C., Steinheimer, P., Warmerdam, E., Dahmen, T., Slusallek, P., Schlinkmann, C., et al. (2023). Effects of age, body height, body weight, body mass index and handgrip strength on the trajectory of the plantar pressure stance-phase curve of the gait cycle. Front. Bioeng. Biotechnol. 11, 1110099. doi:10.3389/fbioe.2023.1110099

PubMed Abstract | CrossRef Full Text | Google Scholar

Zura, R., Xiong, Z., Einhorn, T., Watson, J. T., Ostrum, R. F., Prayson, M. J., et al. (2016). Epidemiology of fracture nonunion in 18 human bones. JAMA Surg. 151, 1627755–e162812. doi:10.1001/jamasurg.2016.2775

CrossRef Full Text | Google Scholar

Keywords: digital medicine, fracture, ground reaction force, injury, pedography, postoperative treatment, rehabilitation, wearable sensors

Citation: Warmerdam E, Wolff C, Orth M, Pohlemann T and Ganse B (2024) Long-term continuous instrumented insole-based gait analyses in daily life have advantages over longitudinal gait analyses in the lab to monitor healing of tibial fractures. Front. Bioeng. Biotechnol. 12:1355254. doi: 10.3389/fbioe.2024.1355254

Received: 13 December 2023; Accepted: 15 February 2024;
Published: 01 March 2024.

Edited by:

Chia-Ying Lin, University of Cincinnati, United States

Reviewed by:

Rongshan Cheng, Shanghai Jiao Tong University, China
Jan Kubicek, VSB-Technical University of Ostrava, Czechia

Copyright © 2024 Warmerdam, Wolff, Orth, Pohlemann and Ganse. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.

*Correspondence: Elke Warmerdam, elke.warmerdam@uni-saarland.de

Disclaimer: All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.