Skip to main content

CORRECTION article

Front. Bioeng. Biotechnol., 14 June 2022
Sec. Biomaterials
Volume 10 - 2022 | https://doi.org/10.3389/fbioe.2022.951730

Corrigendum: Three-Dimensional Cartilage Regeneration Using Engineered Cartilage Gel With a 3D-Printed Polycaprolactone Framework

This article is a correction to:

  1. Three-Dimensional Cartilage Regeneration Using Engineered Cartilage Gel With a 3D-Printed Polycaprolactone Framework

    1. Read original article
Gaoyang Wu&#x;Gaoyang Wu1†Lixing Lu&#x;Lixing Lu2†Zheng Ci,&#x;Zheng Ci3,4†Yahui WangYahui Wang4Runjie Shi, Runjie Shi2,5*Guangdong Zhou,, Guangdong Zhou1,3,4*Shengli Li Shengli Li1*
  • 1Department of Plastic and Reconstructive Surgery, Shanghai Ninth People’s Hospital, Shanghai Jiao Tong University School of Medicine, Shanghai, China
  • 2Department of Otorhinolaryngology Head and Neck Surgery, Shanghai Ninth People’s Hospital, Shanghai Jiao Tong University School of Medicine, Shanghai, China
  • 3National Tissue Engineering Center of China, Shanghai, China
  • 4Research Institute of Plastic Surgery, Weifang Medical University, Weifang, China
  • 5Shanghai Key Laboratory of Translational Medicine on Ear and Nose Diseases, Ear Institute Shanghai Jiao Tong University School of Medicine, Shanghai, China

A Corrigendum on
Three-Dimensional Cartilage Regeneration Using Engineered Cartilage Gel With a 3D-Printed Polycaprolactone Framework

by Wu G, Lu L, Ci Z, Wang Y, Shi R, Zhou G and Li S (2022). Front. Bioeng. Biotechnol. 10:871508. doi: 10.3389/fbioe.2022.871508

In the published article, the fourth and fifth affiliations were inverted, the fourth affiliation should be “4Research Institute of Plastic Surgery, Weifang Medical University, Weifang, China,” and the fifth affiliation should be “5Shanghai Key Laboratory of Translational Medicine on Ear and Nose Diseases, Ear Institute Shanghai Jiao Tong University School of Medicine, Shanghai, China.”

The authors apologize for this error and state that this does not change the scientific conclusions of the article in any way. The original article has been updated.

Publisher’s Note

All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article, or claim that may be made by its manufacturer, is not guaranteed or endorsed by the publisher.

Keywords: 3D cartilage regeneration, engineered cartilage gel, Polycaprolactone, inflammatory response, tissue engineering

Citation: Wu G, Lu L, Ci Z, Wang Y, Shi R, Zhou G and Li S (2022) Corrigendum: Three-Dimensional Cartilage Regeneration Using Engineered Cartilage Gel With a 3D-Printed Polycaprolactone Framework. Front. Bioeng. Biotechnol. 10:951730. doi: 10.3389/fbioe.2022.951730

Received: 24 May 2022; Accepted: 25 May 2022;
Published: 14 June 2022.

Approved by:

Frontiers Editorial Office, Frontiers Media SA, Switzerland

Copyright © 2022 Wu, Lu, Ci, Wang, Shi, Zhou and Li. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.

*Correspondence: Runjie Shi, runjieshi@hotmail.com; Guangdong Zhou, guangdongzhou@126.com; Shengli Li, drshenglili@163.com

†These authors have contributed equally to this work and share first authorship

Disclaimer: All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.