Due to a production error, the funding section was erroneously omitted. The correct funding section appears below
“The authors are grateful for the financial support of the National Key Research and Development Program of China (grant no. 2019YFD1101202), Jiangsu Province Natural Science Foundation for Young Scholars (grant no. SBK2021040275), Natural Science Foundation for Distinguished Young Scholars (grant no. SBK20190035), Program of National Natural Science Foundation of China (grant nos. 22178170, 21878142, 22008119, and 21908100), Key Research and Development Plan of Jiangsu Province (grant nos. BE2020712 and BE2019001), Six Talent Peaks Project in Jiangsu Province (SWYY-045), and High-Level Innovation and Entrepreneurship Talents Introduction Program of Jiangsu Province. We would like to thank all the authors and the National Key Research and Development Program of China, Jiangsu Province Natural Science Foundation for Young Scholars, Natural Science Foundation for Distinguished Young Scholars, Program of National Natural Science Foundation of China, Key Research and Development Plan of Jiangsu Province, and High-Level Innovation and Entrepreneurship Talents Introduction Program of Jiangsu Province.”
The publisher apologizes for this mistake. The original version of this article has been updated.
Statements
Publisher’s note
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article, or claim that may be made by its manufacturer, is not guaranteed or endorsed by the publisher.
Summary
Keywords
wood-plastic composites, polyvinyl Chloride, lignocellulose, pretreatment, mechanical properties
Citation
Frontiers Production Office (2022) Erratum: Enhanced Mechanical Properties of Polyvinyl Chloride-Based Wood–Plastic Composites With Pretreated Corn Stalk. Front. Bioeng. Biotechnol. 10:883601. doi: 10.3389/fbioe.2022.883601
Received
25 February 2022
Accepted
25 February 2022
Published
07 April 2022
Approved by
Frontiers Editorial Office, Frontiers Media SA, Switzerland
Volume
10 - 2022
Updates
Copyright
© 2022 .
This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.
*Correspondence: Frontiers Production Office, production.office@frontiersin.org
This article was submitted to Bioprocess Engineering, a section of the journal Frontiers in Bioengineering and Biotechnology
Disclaimer
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.