Bio-high entropy alloys: Progress, challenges, and opportunities
- 1School of Materials Engineering, Shanghai University of Engineering Science, Shanghai, China
- 2Affiliated Hospital of Youjiang Medical University for Nationalities, Baise, China
- 3State Key Laboratory of Metal Matrix Composites, School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai, China
A Corrigendum on
Bio-high entropy alloys: Progress, challenges, and opportunities
by Feng J, Tang Y, Liu J, Zhang P, Liu C and Wang L (2022). Front. Bioeng. Biotechnol. 10:977282. doi: 10.3389/fbioe.2022.977282
In the published article, Affiliations 2 and 3 were switched. Affiliation 2 should be “Affiliated Hospital of Youjiang Medical University for Nationalities, Baise, China,” whereas Affiliation 3 should be “State Key Laboratory of Metal Matrix Composites, School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai, China.”
The authors apologize for this error and state that this does not change the scientific conclusions of the article in any way. The original article has been updated.
Publisher’s note
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article, or claim that may be made by its manufacturer, is not guaranteed or endorsed by the publisher.
Keywords: biological high-entropy, compositon design, mechanical properties, implant, biocompatibility
Citation: Feng J, Tang Y, Liu J, Zhang P, Liu C and Wang L (2022) Corrigendum: Bio-high entropy alloys: Progress, challenges, and opportunities. Front. Bioeng. Biotechnol. 10:1091752. doi: 10.3389/fbioe.2022.1091752
Received: 07 November 2022; Accepted: 08 November 2022;
Published: 18 November 2022.
Approved by:
Frontiers in Editorial Office,Frontiers Media SA,SwitzerlandCopyright © 2022 Feng, Tang, Liu, Zhang, Liu and Wang. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.
*Correspondence: Yujin Tang, dGFuZ3l1amluQHltY24uZWR1LmNu; Jia Liu, bGl1amlhQHltY24uZWR1LmNu; Peilei Zhang, cGVpbGVpQHN1ZXMuZWR1LmNu