Skip to main content

REVIEW article

Front. Bioeng. Biotechnol., 11 November 2020
Sec. Biomaterials

The Mechanisms and the Applications of Antibacterial Polymers in Surface Modification on Medical Devices

\r\nHaofeng Qiu&#x;Haofeng Qiu1†Zhangyong Si&#x;Zhangyong Si2†Yang LuoYang Luo1Peipei FengPeipei Feng1Xujin WuXujin Wu1Wenjia HouWenjia Hou1Yabin Zhu*Yabin Zhu1*Mary B. Chan-ParkMary B. Chan-Park2Long XuLong Xu3Dongmei HuangDongmei Huang4
  • 1School of Medicine, Ningbo University, Ningbo, China
  • 2School of Chemical and Biomedical Engineering, Nanyang Technological University, Singapore, Singapore
  • 3Faculty of Materials Science and Chemical Engineering, Ningbo University, Ningbo, China
  • 4Ningbo Baoting Biotechnology Co., Ltd., Ningbo, China

Medical device contamination caused by microbial pathogens such as bacteria and fungi has posed a severe threat to the patients’ health in hospitals. Due to the increasing resistance of pathogens to antibiotics, the efficacy of traditional antibiotics treatment is gradually decreasing for the infection treatment. Therefore, it is urgent to develop new antibacterial drugs to meet clinical or civilian needs. Antibacterial polymers have attracted the interests of researchers due to their unique bactericidal mechanism and excellent antibacterial effect. This article reviews the mechanism and advantages of antimicrobial polymers and the consideration for their translation. Their applications and advances in medical device surface coating were also reviewed. The information will provide a valuable reference to design and develop antibacterial devices that are resistant to pathogenic infections.

Introduction

Various medical devices, such as intravascular catheters, heart valves, orthopedic implants, dental implants, and contact lenses are often used clinically to treat diseases (Francolini et al., 2015). However, there are often a large number of pathogenic microorganisms such as bacteria and fungi in the nosocomial environment that may injure patients secondly due to microbial infection, which sometimes even results in serious complications like sepsis and induces high morbidity and mortality. “China Health Statistics Yearbook 2019” published by National Health Commission stated that 29.3% patients with foodborne diseases were infected by microorganisms. In the United States of America, the annual cost responding to infections with drug-resistant bacteria had reached $21–34 billion (Spellberg et al., 2011). The report about the global prevalence of ESKAPE (Enterococcus faecium, Staphylococcus aureus, Klebsiella pneumoniae, Acinetobacter baumannii, Pseudomonas aeruginosa, and Enterobacter spp.) pathogens stated that ESKAPE had developed resistance to almost all known antimicrobials due to their particular antimicrobial resistant characteristics (Kamaruzzaman et al., 2019). The consequence of economic losses in some countries had reached 0.4–1.6% value of GDP (Smith et al., 2005). The infections by bacteria, especially by antibiotic-resistant bacteria, caused serious harm to human beings. And, there are few medicines till now are quite effective against these antibiotic-resistant bacteria.

On the other hand, there are always biomolecules like bacteria, cells, proteins, and polysaccharides, etc., adhered on device surfaces, as the device surfaces provide commensal benefits for them. These biological substances will form a biofilm on device surface that protects bacteria from being killed. Generally, biofilm is 100–1000 times more resistant than planktonic bacteria (Mishra et al., 2015). Antibiotic resistance is now a leading threat to human health because patients have to take more amounts of drugs to tackle the infection. The emergence of multi-drug-resistant bacteria that contaminate medical equipment and devices has put patients at considerable risk of being infected repeatedly, which is harmful and even lethal (Orapiriyakul et al., 2018).

In order to prevent the contamination from microorganisms, making antimicrobial coating on medical devices is the most straightforward method (Francolini et al., 2017). On the one hand, it prevents secondary bacterial contamination to patients; on the other hand, it is also favorable to prevent the increase of drug-resistant pathogens through reducing medicine administration, which further cuts down the pollution to the environment due to reduced antibiotics leaching (Riga et al., 2017). Therefore, it is urgent to develop antimicrobial materials with function as antibiotics and without drug resistance, so that microbial resistant medical instruments and equipment can be provided to hospitals and patients. Polymeric materials, such as cationic polymers, are a class of environmentally friendly antibacterial agents that are not prone to cause drug resistance, because they mainly kill bacteria by damaging the cell membrane. In addition, artificial polymers can be designed and synthesized to meet medical requirements but not restricted by the device shape. Thus, antibacterial polymers will be a promising alternative to antibiotics. Therefore, in this article we will review the mechanism, advantages and their potential clinical applications of a variety of antibacterial polymers, which will bridge the gap of scientific research and the practical or potential applications. It is believed that the information proposed in this article will provide a valuable reference in designing and developing antibacterial medical devices in future.

Mechanism of Antibacterial Effect

To clarify the antibacterial mechanism, we must understand the structural characteristics of bacteria at first. The biologic structure of bacteria is similar to that of cells. It is mainly composed of cell wall, cell membrane and intracellular components. Some bacteria have special structures like capsule, flagella, pili, and spores (Silhavy et al., 2010). As early as 1884, Hans Christian Gram, a Danish bacteriologist, invented a method to classify bacteria known as Gram staining. According to the reaction with Hexamethyl-p-phenylenediamine chloride, a crystal violet dye, he divided the bacteria into two categories: Gram-positive and Gram-negative bacteria. This method has been widely used in screening or identifying organisms since then. Gram-positive bacteria have a thick network of cell walls made of peptidoglycan, which retains the crystal violet dye. Thus, the bacteria display purple. Instead, Gram-negative bacteria have too thin cell walls to retain crystal violet dye. Thus, the bacteria are not stained.

Both Gram-positive and Gram-negative bacteria have cytoplasmic membranes, which are phospholipid bilayers containing functional proteins. The phospholipid bilayers include anionic lipids of cardiolipin (CL), phosphatidylglycerol (PG), and phosphatidylserine (PS), which is vastly different from mammalian cell membranes that are rich in zwitterionic lipids of phosphatidylcholine (PC), phosphatidylethanolamine (PE), and cholesterol. Therefore, bacteria are more negatively charged compared to mammalian cells in structure (Li et al., 2012). This feature has been used by scientists to explore new antibacterial medicines that can selectively kill bacteria while they do not display toxicity to mammalian cells. This is the main concept recognized by researchers to distinguish bacteria from mammalian cells.

Except for the cytoplasmic membrane, the Gram-negative bacteria have additional outer membranes which are composed of anionic lipopolysaccharide (LPS) molecules crosslinked by the ionic bridges between the phosphate groups and divalent ions. Thus, the outer membranes of Gram-negative bacteria are very stable and function as permeabilizing barriers to most large hydrophobicity molecules.

Targeting the Bacterial Membranes

The cytoplasmic membrane is a valid target to eradicate bacteria. The damaged membrane is usually very difficult to renew. Many cationic polymers combat bacteria via electrostatic attraction to the cell membrane, followed by the hydrophobic insertion into lipid tails, resulting in membrane lysis. Cationic polymers generally contain positively charged functional groups like amine and guanidine in the molecules, while bacterial membranes are negatively charged under normal status. Through the electrostatic force between positive and negative charges, the cationic materials are attracted to the anionic bacterial membrane, and further penetrate into or become part of the bacterial cytoplasm; they can also insert into the phospholipid bilayer, resulting in the membrane broken. It is worth noticing that not all the cationic molecules will be toxic to bacteria. The molecules will be harmful to the negatively charged bacteria membrane when the cationicity reaches a certain amount to achieve the multivalence effect. Most of the amphiphilic polymers consisting of cationic and hydrophobic residues killed the bacteria via the membrane lysis mechanism (Chin et al., 2013; Hoque et al., 2015).

Several models have been proposed by researchers to explain the membrane lysis mechanism (Wimley, 2010): “Carpet” model, which explains that the antimicrobial agents destroy the phospholipid structure of bacterial membranes at multiple sites at the same time to induce many irreparable holes in membranes; “Toroidal-pore” model, which illustrates that antibacterial molecules can insert spirally into the bacterial membrane to form circular holes in the membrane surface; “Barrel” model, which tells that the antibacterial molecules screw themselves into bundle-like spiral molecules in the membrane. The hydrophobic region of the molecules parallels to the membrane lipids while the hydrophilic ends will form pores in the cytoplasmic membrane. In all these cases, they eventually lead to bacteria death via membrane lysis (Brogden, 2005).

As the Gram-negative bacteria have an additional outer membrane that is a barrier to the large hydrophobic molecules, most of the cationic polymers have less potency against Gram-negative bacteria compared to that of Gram-positive bacteria (Silhavy et al., 2010; Cox and Wright, 2013). Instead of targeting the cytoplasmic membrane, the outer membrane of Gram-negative bacteria may also be the active targets for cationic polymers. Colistin, the last-resort antibiotic against Gram-negative bacteria, initially interacted with the negatively charged LPS in the bacterial outer membrane. As colistin bound to LPS much stronger than the divalent cations Mg2+ or Ca2+, which otherwise tightly hold the LPS molecules together, it competitively replaced these divalent ions to weaken and release the LPS molecules to enable the colistin to reach the bacterial cytoplasmic membrane resulting in bacterial lysis (Sabnis et al., 2018).

However, the cationic polymers targeting bacterial membrane usually produce a low selectivity, which might bring the cationic polymers failed in clinical trials (Gordon et al., 2005), because the amphiphilic structure of cationic and hydrophobic polymers may engage in hydrophobic interaction with mammalian cell cytoplasmic membranes, resulting in cytotoxicity. Thus, the new mechanisms of cationic polymer actions are highly sought for.

The cationic peptidomimetic murepavadin will selectively combat Gram-negative bacteria P. aeruginosa by targeting the essential protein LptD (Srinivas et al., 2010), a translocator of LPS molecules, in the outer membrane of Gram-negative bacteria. As the mammalian cell membranes do not include LptD, the off-target toxicity in mammalian cells may be mitigated. In addition to LptD, six more Lpt proteins are involved in translocating LPS synthesized in the cytoplasmic membrane to the outer leaflet of the outer membrane via constructing a macromolecular complex connecting the cytoplasmic membrane and the outer membrane. Cationic antimicrobial peptide (AMP) thanatin targets not only LptD in the outer membrane, but also targets the periplasmic protein Lpt A (Vetterli et al., 2018). The dual targets of thanatin may contribute to its low possibility of resistance evolution. Another essential protein in the outer membrane is BamA, a chaperone and translocator that folds and inserts β-barrel proteins into the outer membrane. Darobactin selectively killed Gram-negative bacteria by targeting BamA to prevent its functions (Imai et al., 2019). However, due to the specific protein target of darobactin, the resistant mutants occurred after a few generations. The progress in this area leads to another interesting cationic chimeric peptidomimetics that target both the LPS and BamA (Luther et al., 2019). As the multiple targets, the frequency of resistant mutants to them is less than 10–10. Except for the essential proteins in outer membrane, the cytoplasmic membrane contains some potential protein targets too; the cationic macrocyclic peptides G0775 target the LepB (Smith et al., 2018), an essential protease in charge of cleavage of the signal peptides. G0775 has broad-spectrum antimicrobial activities against both Gram-positive and Gram-negative bacteria. The electron transport chain (ETC) in bacterial cytoplasm in charge of a series of essential cellular processes (Hurdle et al., 2011), such as bacterial respiration, antitoxins, nutrient uptake, etc., represents another interesting target for combating bacteria. Lysocin E was the firstly reported cationic peptide that kills bacteria through targeting menaquinone (Hamamoto et al., 2015; Itoh et al., 2019), the shutter in the ETC. The damage of the ETC may generate reactive oxygen species (ROS) that can further cause impairment to many cellular molecules, such as DNA and proteins (Painter et al., 2017). Cationic star polymer SNAPPs killed bacteria involving in the generation of ROS (Lam et al., 2016).

Inhibition of Cell Wall Synthesis

The cell wall structure mainly consisting of peptidoglycans provides bacteria with mechanical support to maintain morphology. These peptidoglycan layers are made of N-acetylglucosamine and N-acetylmuramic acid connecting by β-1,4 glyosidic bonds. The occurrence of crosslinking among glycans via peptide chains forms stable wall networks. The lipid II is the essential precursor for the biosynthesis of peptidoglycan layers (Breukink and de Kruijff, 2006; Malin and de Leeuw, 2019), which could be the targets of cationic polymers to inhibit the cell wall synthesis. Cationic peptide teixobactin killed Gram-positive bacteria S. aureus via targeting the lipid II to prevent the cell wall synthesis (Ling et al., 2015). Lipid II is also the targets of many other cationic peptides, such as plectasin (Schneider et al., 2010), nisin (Scherer et al., 2015), telavancin (Saravolatz et al., 2009), teicoplanin (Somma et al., 1984), etc. As the lipid II only exists in bacteria, the non-specific toxicity to the mammalian cells may be decreased. Daptomycin, the last-resort of antibiotic against drug-resistant Gram-positive bacteria approved, was reported to kill bacteria via membrane pore formation. Nevertheless, Hamoen et al. found recently that daptomycin only caused the decrease in membrane potential without membrane pore formation (Müller et al., 2016). The key action of daptomycin is blocking the cell wall synthesis by the removal of lipid II synthesis proteins. Lipid II is synthesized in the bacterial cytosol and transported by lipid shutters, undecaprenol phosphate, and flippase. Therefore, molecules that are able to target the lipid II shutters may also inhibit cell wall synthesis. Indeed, cationic peptide friulimicins and humimycins prevent the cell wall synthesis of Gram-positive bacteria by engaging in blocking undecaprenol phosphate and flippases (Liu et al., 2019), respectively. As the Gram-negative bacteria have much thinker peptidoglycan layers, which are covered by the outer membrane barrier, thus most of the large molecule weight polymers only inhibit the cell wall synthesis in Gram-positive bacteria.

Targeting the Intracellular Molecules

In the case of cationic polymers that can cross the outer membrane and cytoplasmic membrane barriers, they may accumulate in the cytosol and interrupt the intracellular machineries. DNA is the molecular basis for bacterial replication. The damage to DNA will adversely affect its synthesis and replication of bacteria. Cationic polymer polyhexamethylene biguanide (PHMB) can enter into bacteria to inhibit cell division and condense bacterial chromosomes via direct interaction with DNA (Chindera et al., 2016). After binding to DNA, PHMB will condense the DNA to form the nanoparticles, which may result from the electrostatic interaction between the cationic PHMB and anionic DNA molecules. A similar mechanism was proposed for the biodegradable guanidinium-functionalized polycarbonates (Chin et al., 2018), which eradicate bacteria without membrane morphological changes. Interestingly, both the PHMB and guanidinium-functionalized polymers have the guanidinium functional groups, which may contribute to the cell-penetrating effect of these cationic polymers. Recently, Liu et al. reported that cationic poly(2-oxazoline) selectively killed S. aureus (Zhou et al., 2020), engaging in strong interaction with DNA at low concentration, which results in producing ROS to damage the membrane and kill the bacteria. Duarte et al. isolated an AMP ruminococcin C1 (RumC1) from human gut symbiont (Chiumento et al., 2019), which displayed similar phenotype as metronidazole that acts through inhibition of nucleic acid synthesis. Thus, the authors proposed that RumC1 combats bacteria through most likely inhibition of nucleic acid synthesis in a metronidazole-like manner.

Protein synthesis occurs in the ribosome of bacteria. The ribosome is a possible target for cationic polymers to work. Steitz et al. found that bovine peptide bactenecin Bac71–35 preferentially interacted with the 70S ribosome (Gagnon et al., 2016) to inhibit the initiation of translation, resulting in protein synthesis inhibition. Oncocin, apidaecin, and its derivative Api137 are another three proline-rich AMPs that can inhibit protein synthesis via target the bacterial ribosome (Krizsan et al., 2014; Florin et al., 2017).

Immunomodulatory

In addition to the direct eradication of bacteria based on the mechanism discussed above, some cationic polymers act as immunomodulators to combat bacterial infections (Mookherjee et al., 2020), which include recruiting the immune cells, such as neutrophils, macrophages, and T cells, to the infection sites to promote the bacterial clearance, enhancing the neutrophil function, suppressing the release of pro-inflammatory cytokines and facilitating the induction of anti-inflammatory cytokines, promoting phagocytosis, etc. Hancock and Sahl (2006) first reported an innate defense-regulator peptide (IDR-1) that itself did not have direct antimicrobial efficacy (Scott et al., 2007), but it can activate mitogen-activated protein kinase and other signaling pathways, enhancing the level of monocyte chemokines and suppressing the pathogen-associated signature molecules to protect the mice from infection by both Gram-negative bacteria and Gram-positive bacteria. Cationic AMP LL-37 can clear the bacterial infection via facilitating neutrophil response (Beaumont et al., 2014). Although the in vitro action of cationic star polymer SNAPPs includes mechanisms like membrane disruption, facilitating ions to cross the cytoplasmic membrane, generation of ROS (Lam et al., 2016), its in vivo antimicrobial activity actually engaged in the recruitment of neutrophils. Compared to the direct killing of cationic polymers, which are often affected by protein fouling, salt concentration, etc., the indirect killing of cationic polymers based on modulating immune response represents a promising strategy to develop therapeutic antimicrobial agents.

All these antibacterial mechanisms were summarized as diagram in Figure 1.

FIGURE 1
www.frontiersin.org

Figure 1. Schematic diagram of antibacterial mechanisms.

Classification and Properties of Antibacterial Materials

The repeated application of traditional antibiotics may cause genetic mutations of microorganism, resulting in the drug-resistant microorganisms (Vasilev et al., 2014). Four types of antibiotic resistance mechanisms were reported (Bahman et al., 2016): (1) bacteria can block antibiotics through reducing the outer membrane permeability; (2) bacteria can cut down or eliminate the medicine effect through adjusting self-biology if antibiotics enter into the cells; (3) bacteria will produce corresponding enzymes to degrade antibiotics; (4) bacteria alter themselves histology to change the target site that antibiotics act on. Differently, cationic polymers are able to overcome the defect of these drug resistance pathways in bacteria. Moreover, artificial cationic polymers have the feature of synthetic diversities. Many of cationic polymers have been evaluated to be antimicrobial candidates. Importantly, antibacterial effect and cell toxicity of them are capable of being regulated artificially through adjusting the molecular structure, molecular weight, charge density, and amphiphilic balance, etc., to finally achieve the material properties with the excellent antimicrobial effect and low toxicity to cells or tissues (Jaeger et al., 2010). Therefore, cationic antimicrobial polymers are considered to be the last frontier of antibiotic development. The follows review the preparation, classification and performance of antibacterial polymers.

Cationic Polymers

Polypyridine (PPy) derivatives are a class of heterocyclic cationic polymers containing quaternary ammonium groups. Li and Shen (2000) synthesized copolymers of 4-vinylpyridine (VP), styrene and divinylbenzene (DVB), followed by quaternization of halogenated hydrocarbons. This copolymer possessed a good bactericidal effect on Escherichia coli, but has poor biocompatibility to mammalian cells. In order to overcome this limitation, hydrophilic polypyridine was copolymerized with 2-hydroxyethyl methacrylate (HEMA) and poly (ethylene glycol) methyl ether methacrylate (PEGMA) as the starting materials, followed by reaction with N-hexyl poly (4-vinylpyridine). The synthetic hydrophilic polypyridine copolymer not only displayed significant improvement in biocompatibility, but also increased the antibacterial performance as high as 20 times than that of quaternized poly (vinylpyridine) alone (Allison et al., 2007; Sellenet et al., 2007).

Poly ionic liquids are a group of polyelectrolytes that consist of both anion and cationic groups on the repeating units of polymeric backbones (Zhang et al., 2020). The positive residues can interact with the negative bacterial cell membrane via electrostatic interaction, resulting in disrupting the integrity of bacterial cell membrane. Therefore, poly ionic liquids may be a novel type of effective antibacterial materials. Poly-imidazolium polymers are a series of poly ionic liquids that are readily prepared via either step-by-step synthesis or one-pot polycondensation reactions. Liu et al. (2012) firstly prepared a series of main-chain imidazolium polymers via step-by-step coupling reactions (Liu et al., 2012). Main-chain imidazolium oligomer (IBN-1) with 6 imidazolium repeat units displayed the highest potency against Gram-negative bacteria E. coli, P. aeruginosa, K. pneumoniae, A. baumannii, Enterobacter cloacae and Gram-positive bacteria of Methicillin-resistant S. aureus (MRSA), Vancomycin-resistant enterococcus (VRE) with the MICs in the range of 1.5–31.25 μg/ml. Although the authors reported that IBN-1 was almost non-hemolytic at a concentration of 5000 μg/mL, it was found to be highly toxic to mammalian fibroblast cells. In the following studies, the authors prepared another main-chain imidazolium polymer PIM-45 via poly-condensation reactions (Liu et al., 2013), which are effective against both planktonic fungi and fungal biofilm without hemolysis. However, it was still toxic to mammalian fibroblasts. To overcome the issue of bio-toxicity, the researchers recently fabricated a series of biodegradable imidazolium polymers via incorporating pH-degradable linkers into the polymer chains (Yuan et al., 2019). For example, IBN-HC8 with hemiaminal as the degradable linker exhibited good antimicrobial potency against Gram-positive S. aureus and Gram-negative E. coli as its parental material, IBN-C8, possessed the good biocompatibility to human primary dermal fibroblasts. Yuan et al. detected the antimicrobial potency of a series of cationic polymers with imidazolium rings in the main-chain or side-chain (Guo et al., 2018). Interestingly, they found that the antimicrobial potency of main-chain imidazolium polymers was much superior to the side-chain imidazolium polymers. The results provide insight for designing antimicrobial agents with high potency and low toxicity.

Guanidine-functionalized polymers are able to destroy the biological structure of bacteria by extracting calcium ion from the bacterial outer membrane and disrupt the cytoplasmic membrane (Santos et al., 2012). As calcium ions are crosslink agents for the LPS in outer membrane, the lack of them will increase the outer membrane permeability. The guanidine-functionalized polymers subsequently cross the outer membrane to interact with the cytoplasmic membrane via electrostatic interaction, which finally results in lysis of cytoplasmic membrane. Therefore, they have good antibacterial capabilities and thus been widely used as cationic antibacterial materials. Chin et al. (2018) prepared a series of guanidine-based polycarbonates (Chin et al., 2018). These materials exhibited excellent antibacterial properties and good selectivity; the therapeutic index [bactericidal concentration (LD50)/lethal concentration (ED50)] is 1473, in the experiments of P. aeruginosa lung infection of mice and perforation-induced polybacterial peritonitis. Their bactericidal effects were also investigated with mice infected by Enterococcus, S. aureus, K. pneumonia, A. baumannii, and Enterobacter species (commonly known as ESKAPE bacteria). More importantly, these guanidine-based polycarbonates maintained the bactericidal function after repeated treatment for one month, indicating that the bacteria did not exhibit drug resistance to them, which is much better than antibiotics in this regard.

Conjugated oligomers (COEs) are another class of antibacterial materials with good bactericidal function. COEs are composed of hydrophobic and cationic building blocks in the backbone. This hydrophobic components will insert and break the bacterial cell membrane, aiming at killing bacteria (Liu et al., 2012; Bazan et al., 2018).

Dendritic polyethylene imine (PEI) contains both hydrophobic polyethylene main chain and imine group at the terminus. It has a high positive charge density (Davide et al., 2013). But the high charge density of PEI is toxic to animal cells. In order to achieve the balanced antibacterial activity and biocompatibility, literature (Paula et al., 2008) reported that the content and proportion of the molecular chain and functional groups, such as quaternary ammonium groups, alkyl chains with different lengths, allyl, and benzyl groups, etc., shall be adjusted to a proper balance. The results showed that lower molecular weight usually has poorer bactericidal function, but larger molecular weight was more toxic to animal cells.

Antimicrobial peptides, basic polypeptides polymerized from 20∼60 amino acid residues, have been much studied by researchers due to their broad-spectrum antibacterial activity. They can be isolated from bacteria or animal tissues, or can be artificially synthesized (Gabriel et al., 2007). Compared with mammalian cells, the bacterial cell membrane is more negatively charged due to the accumulation of negatively charged LPS in Gram-negative bacteria or teichoic acid in Gram-positive bacteria. That’s why bacteria have a stronger electrostatic attraction to cations than mammalian cells do. Therefore, the amphiphilic AMPs can work to attach the bacterial cell membrane through positively charged groups while their hydrophobic bulk insert into the bacterial phospholipid bilayer to induce leakage or lysis of bacterial cell membrane (Kadurugamuwa and Beveridge, 1999).

However, AMPs are very difficult to produce because extracting from organisms is high cost and low yield. Some researchers have synthesized some AMPs by N-carboxy hydride (NCA) ring-opening polymerization (Wong et al., 2016; Wu et al., 2018). A series of star polymers were synthesized from NCA polymerization of lysine and leucine to mimic the natural AMPs. The results of in vivo tests in mice model verified that these star polymers had good bactericidal activity and good biocompatibility (Lam et al., 2016). Chan group polymerized with NCA and chitosan to simulate the peptidoglycan component of the bacterial cell wall (Li et al., 2012; Hou et al., 2017). On these bases, they designed a variety of glycosylated cationic chitosan-based polymers, whose antibacterial activity and selectivity can be adjusted to meet application requirements through changing the glycosyl composition and cationic residues (Pranantyo et al., 2017; Xu et al., 2019). For example, glucosamine-functionalized star polymers (S-GSA 25) showed high bactericidal activity against Gram-positive bacteria while maintained good biocompatibility (Wong et al., 2016).

As the natural AMPs are sensitive to the host enzymes that may render the AMPs ineffective during in vivo treatments (Kamaruzzaman et al., 2019). Therefore, AMPs memetics are widely investigated (Kamaruzzaman et al., 2019). Amongst them, β-peptides are one of the most promising candidates that have been widely studied as cationic antimicrobial peptidomimetics due to their structural similarity to natural α-peptides except for more resistant to host-enzyme degradation. Gellman et al. firstly prepared a non-hemolytic antimicrobial β-oligomer (β-17) via solid-phase synthesis. β-17 showed a comparable antimicrobial potency to natural AMP magainin against E. coli (MIC = 6.3 μg/mL), Bacillus subtilis (MIC = 1.6 μg/ml), E. faecium (MIC = 12.5 μg/ml), and S. aureus (MIC = 3.2 μg/ml) (Porter et al., 2000). Subsequently, they synthesized a series of 20-unit oligomers with varying cationic residues from 100 to 30% to investigate the structure-activity relationships. When the cationic residues decreased to 60% in the whole molecule, the oligomer showed comparable activity with magainin II against a panel of bacteria, including E. coli (MIC = 12.5 μg/ml), B. subtilis (MIC = 3.1 μg/ml), E. faecium (MIC = 12.5 μg/ml), S. aureus (MIC = 25 μg/ml) (Mowery et al., 2007). Importantly, it showed significant improvement of biocompatibility to erythrocytes compared to magainin II, with a minimum hemolytic concentration (MHC) of 100 μg/mL. Thus, they concluded that the best proportion of cationic residue was 63%, achieving a selectivity index (MHC/MIC) of 32. Recently Chan-Park et al. reported two types of glycosylated cationic block co-beta-peptides that showed excellent in vivo antimicrobial performance. PDGu(7)-b-PBLK(13) showed directly killing effect against Gram-positive bacteria MRSA USA 300 in the in vivo biofilm wound infection model, and PAS8-b-PDM12 could sensitize a variety of antibiotics to recuse the mice from a lethal systemic infection caused by all the ESKAPE Gram-negative bacteria (Zhang et al., 2019; Si et al., 2020).

Although synthetic cationic polymers have shown great potential in antimicrobial applications, they are suffered from some disadvantages which limit their applications in biomedical fields. First, amphiphilic cationic and hydrophobic polymers may cause hemolysis due to the non-specifically hydrophobic interaction with the erythrocyte membrane. Second, the physiological stability of AMPs and their memetics is poor because most of them are composed of natural amino acids. Third, polypeptides with a specific sequence are till now hard to manufacture industrially (Hancock and Sahl, 2006). Currently, only a few AMP-related drugs such as colistin and daptomycin have been approved by the United States FDA to use in clinic (Eckert, 2011). All these antibacterial materials were summarized in Table 1.

TABLE 1
www.frontiersin.org

Table 1. Classification and property of antibacterial materials.

Antibacterial Hydrogels

The hydrogel is a super-hydrophilic polymeric material with a 3D network. The polymeric hydrogel with intrinsic antibacterial activity possesses both super-hydrophilicity and good antibacterial effects in nature. Hydrogel poly(N-acryloyl glycine), formed from N-acryloyl glycinamide and 1-vinyl-1,2,4-triazole via hydrogen bonding interaction of two amide groups in the side chain of N-acryloyl glycinamide, has good bactericidal activity. Moreover, it possesses the good capability of self-healing, thermoplastic, and re-shape at low temperatures due to the group of 1-vinyl-1,2,4-triazole in the molecule. It can be used as matrixes of 3D printing or injectable biomaterials. The results of cytotoxicity tests and in vivo implantation confirmed that this hydrogel has good biocompatibility (Wang et al., 2017). Hydrogels, N-(2-hydroxypropyl)-3-trimethyl chitosan chloride (HTCC) and the bioadhesive poly(dextran aldehyde), not only are effective against Gram-positive and Gram-negative bacteria, but also promote the wound healing in rats’ model (Hoque et al., 2017). Whilst, a hydrogel made from dipeptides-containing long-chain amino acids has bactericidal activity against Gram-negative E. coli and P. aeruginosa but displays a weak effect on Gram-positive bacteria (Baral et al., 2016). Enzymatic A9K2 hydrogel containing fetal bovine serum (FBS) or plasma amine oxidase (PAO) was once synthesized. The experimental results verified its biocompatibility and effectiveness against Gram-positive and Gram-negative bacteria, including P. aeruginosa, S. aureus, and B. subtilis (Bai et al., 2016).

Hydrogels Containing Antibacterial Components

Hydrogel is often used as organic carrier in the field of biomedicine due to its excellent biocompatibility and substance transferring capabilities. The molecular structure, mechanical and rheological properties can be tuned by changing temperature, pH value, ionic strength, and ultraviolet treatment, etc. The drug release profiles can be adjusted to meet multiple needs (Ng et al., 2014; Yang K. et al., 2018). Antibacterial hydrogels are mainly divided into two types: hydrogels containing antibiotics, and metal nanoparticles, according to the encapsulated ingredients (Li et al., 2018).

Antibiotic-containing hydrogel refers to the one in which antibiotic drugs are mixed or embedded in the hydrogel molecular network. When antibiotic-containing hydrogel is coated onto the infected site, the antibiotic in the hydrogel will be gradually released to achieve the bactericidal effect. This kind of treatment minimized the amount of antibiotics, thus might reduce the side effects of the drug compared with oral administration. At the same time, the hydrogel matrix is helpful to keep the wound moist, which is conducive to wound healing. Polyethylene glycol fumarate/sodium methacrylate (PEGF/SMA) hydrogel was used to treat bacterial infections, in which vancomycin was loaded through electrostatic interaction (Gustafson et al., 2016). A continue release up to 4 days was achieved at the surgical site, which helped to restrain methicillin-resistant S. aureus and promoted wound healing. pH responsible poly (2-hydroxyethyl methacrylate)-based crosslinked hydrogel (pHEMA) was used as hydrogellic carrier (Das and Pal, 2015). N-trimethyl chitosan/carboxymethyl xanthate (TMC/CMXG) hydrogel manufactured from chitosan, dimethyl sulfate (DMS), and methylol xanthan gum (CMXG) is a good matrix to continuously release ciprofloxacin at a constant rate with non-cytotoxicity to mammalian cells (Hanna and Saad, 2019).

The second type is metal nanoparticle (NP)-containing hydrogels, where metal nanoparticles were embedded in the molecular network of hydrogels. It is well-known that metal NPs are easily oxidized, moisturized, and agglomerated in the air. All these shortcomings will be avoided after they are loaded in the hydrogel matrix. The most commonly used metals are silver (Ag) and zinc oxide (ZnO) NPs, because these two metals can directly enter the bacterial cells to bind the DNA or oxidative metabolic enzymes, leading to hinder the bacteria metabolism or mutate the DNA. Both the hydrogels are good bactericidal materials against E. coli and S. aureus (Shafagh et al., 2018; Neacsu et al., 2019). Crosslinked carboxymethyl chitosan (CMCh)/ZnO hydrogel, produced from in situ formation of ZnO nanorods in the crosslinked carboxymethyl chitosan (CMCh) matrix, is effective against E. coli and S. aureus (Wahid et al., 2015). The hydrogel CMCh/CuO displayed a similar bactericidal effect on E. coli and S. aureus when nanoparticle CuO was used instead of ZnO in the hydrogel (Wahid et al., 2017).

Preparation and Application of Antibacterial Coating

Medical devices or implants are often surrounded by cells or extracellular matrix like proteins and polysaccharides, which are conducive to bacteria colonization and biofilm formation, further enhancing the tolerance of bacteria to antibiotic treatment. Thus, it is necessary to change the physical and chemical characteristics of the device surface to prevent pathogen infection. The cationic polymers and hydrogels stated as above can be used as building materials to construct the coatings on various medical devices to achieve the bacteria resistance. Anti-infective surfaces mainly include: (1) anti-adhesive surfaces; (2) surfaces with contact antibacterial properties; (3) surfaces with a combination of anti-adhesion and contact sterilization. Generally, hydrophilicity is unfavorable for microorganism adhesion. Therefore, many studies focus on improving the surface hydrophilicity, for example, fixing polysaccharides, such as hyaluronic acid and heparin, or hydrophilic polyethylene glycol (PEG) onto device surface to obtain a significantly hydrophilic surface or interface (Busscher et al., 2012; Junter et al., 2016). On the other hand, grafting with antimicrobial reagents on the surface may realize the contact sterilization (Konai et al., 2018). Expectably, the devices will obtain the excellent bactericidal surface if they are treated by anti-adhesion and bactericidal reagent grafting with the optimized components.

There are various methods for grafting antibacterial agents on the device surface. Generally, it can be divided into three categories, namely covalent grafting, material blending, and layer-by-layer (LBL) assembly. The covalent grafting method is to form a stable modified layer with covalent bonds between the graft molecule and the device surface; the material blending and LBL assembly use non-covalent bond reactions, such as electrostatic attraction or hydrogen bonding. The later surfaces will not be as stable as the former, covalent grafting. Sometimes, cross-linking agents will be used to cross-link the blended or LBL assembled materials to enhance their stability.

Covalent Grafting

There are two categories in the covalent grafting method, “grafting to” and “grafting from.” The method of “grafting to” refers to covalently grafting a polymeric chain via its reactive functional groups onto a device surface material through chemical reactions. “Grafting from” is the method in which the target monomers were polymerized through the initiative groups that were generated beforehand on the surface substrate. The method of “grafting from” is more often used because a larger amount and higher density of monomers can be grafted, compared with the method of “grafting to” (Steve et al., 2003). However, these two methods were not clearly classified in surface modification on devices.

Polyethyleneglycol (PEG) based materials possess many desired properties like hydrophilicity, lubricity, moisture retention and compatibility, etc., and thus have been widely applied in cosmetics, pharmaceutical, pesticide and food package. For example, a bactericidal and non-thrombogenic small diameter vascular graft was manufactured via 3D-printing technology with PEG-polycaprolactone (PCL)-S-Nitroso-N-acetyl-D-penicillamine (SNAP) matrix. This graft was verified to have antibacterial efficacy against both Gram-positive and Gram-negative bacteria, as well as antithrombogenic properties in plasma (Kabirian et al., 2019). Polycarbonate was prepared with cations, PEG and dopamine at the side terminus, followed by surface modification on silicon substrate, which was treated in trimethylolaminomethane for 24 h at 70°C, through cross-linking reaction between amine from the substrate and dopamine from polycarbonate (Chuan et al., 2015). This modification made the substrate obtain the properties of both antimicrobial and antifouling properties due to the functional components of PEG and cationic quaternary ammonium. For example, it maintains the antibacterial effect against S. aureus for 14 days. Meanwhile, it can prevent protein and platelet adsorbing on the surface due to the super-hydrophilic PEG, which is conducive to reduce thrombosis occurrence. Another PEG containing polymer, methacrylate (MA)-PEGn-b-antimicrobial polypeptide copolymer, was synthesized from N-carboxyanhydride and methacrylate-PEGn-tosyl, in Ma group (Gao et al., 2017). This diblock amphiphilic copolymer has properties of antimicrobial, antifouling, and antibiofilm. The surface obtained excellent antimicrobial activity against several pathogenic bacteria (E. coli, P. aeruginosa, and S. aureus), and effectively prevent biofilm formation after the copolymer was grafted onto silicone rubber (commonly used catheter material) via plasma/UV-induced surface polymerizations. This bottlebrush coating also greatly reduced protein adsorption and platelet adhesion, indicating its excellent antifouling ability and blood compatibility.

Monomers or polymers containing double bonds in their molecular structures can be photo-initiated in the presence of a radical initiator. They are thus often used for grafting purposes. Three polyoxo norbornene-based polyzwitterions were fabricated through UV activation and thiol-ene click reaction. A silane-treated substrate followed by polynorbornene grafting exhibited strong protein repellent and biofilm inhibition (Kurowska et al., 2017). Moreover, this substrate is friendly to red blood cells and mucosal keratinocytes under the proper ratio of zwitterions and polynorbornene. This technology can be used on various substrates with active radical sites after silane or benzophenone treatment. Therefore, it has the versatility and is expected to be widely applied to various medical devices. A semi-interpenetrating polymer network (SIPN) was formed from quaternized poly [2-(dimethylamino) ethyl methacrylate-methyl methacrylate] [poly (DMAEMA-co-MMA)], and polymerized ethylene glycol dimethacrylate. This SIPN polymer was coated on contact lens to produce anti-fog/antimicrobial dual-functional surface. The anti-fogging function comes from the hydrophilic/hydrophobic balanced smooth coating, and antimicrobial from the quaternized structure, which can completely kill Gram-positive Staphylococcus epidermidis and Gram-negative E. coli. This dual function polymer is expected to have a broad application in contact lenses (Zhao et al., 2016).

“Polymer brush” is an imaginable term to describe an architecture in which polymer chains are terminally tethered to a surface at a very high density. This grafting from the polymerization approach is a good way to grow the chains directly on the substrate surface. Monomer [2-(methacryloyloxy) ethyl]-trimethylammonium chloride (META), N-(3-sulfopropyl)-N-(methacryloyloxyethyl)-N, N-dimethylbetaine (SBMA) and 2-methacryloyloxyoxyethyl phosphate choline (MPC) are polymerized to form a brush-like polymer and grafted on a substrate through surface-initiated atom transfer radical polymerization. The positively charged META functionalized the surface with antimicrobial activity, while the zwitterionic SBMA and MPC make the surface antifouling and resistant to bacterial adhesion. This technology provides a potential method to establish antifouling and antimicrobial surfaces on medical devices (Xu et al., 2017). Similarly, quaternary ammonium methacrylate compound (QAC-2) had a perfluoroalkyl tail group at one end and an acrylic moiety at the other end. A one-step UV curing of QAC-2 and methyl methacrylate (MMA) using ethylene glycol dimethacrylate (EGDMA) as a cross-linking agent obtained a polymer-coated surface on a glass slide which had been treated by rotenone solution and produced active hydroxyl groups. This modified glass slide possessed excellent antimicrobial properties (Jie et al., 2015). Methacrylate was initiated to polymerize on quartz glass and titanium (Ti) surfaces containing silane groups. Using this polymeric molecule as the anchor, the peptide was further coupled to finally offer quartz glass and Ti surface excellent antimicrobial activity (Yu et al., 2015). Xu et al. (2017) grafted L-arginine methyl ester-methacrylamide (Arg-Est) and L-arginine-methyl Acrylamide (Arg-Me) polymer onto glass slides using surface-induced reversible addition-fragmentation chain transfer polymerization (RAFT). Compared with purely Arg-Est grafted surface, it (Arg-Est-Me) has better antimicrobial properties. Unexpectedly, this antimicrobial surface will shift to the antifouling surface after the grafted Arg-Est-Me is hydrolyzed; all bovine serum albumin, Gram-positive S. aureus, Gram-negative E. coli, and Amphora coffeaeformis were resisted to adhesion. The in vivo tests verified that the grafted Arg-Est-Me component has good biocompatibility and stability.

Poly-N-isopropylacrylamide (poly-NIPAAM) has been widely used in tissue engineering and micro-structure in micro-fluidic applications. It was used to combine with quaternary ammonium salt [2-(dimethylamino)-formaldehyde ethyl acrylate (DMAEMA)] and grafted onto glass, polydimethylsiloxane (PDMS), and silicon wafer substrates using RAFT method (Wang et al., 2016). When the temperature increased, the component NIPAA of the copolymer brush became hydrophobic, which helped the surface trap microorganisms and the surrounding DMAEMA component contributed to killing the trapped bacteria. The bactericidal efficiency was up to reduce three logarithmic levels of S. aureus and two logarithmic levels of E. coli. NIPAA became hydrophilic when the temperature decreased, which oppositely helped to release the killed microorganisms together with the coated surface. This capability makes the surface switchable between bactericidal and antifouling even after four deposition/release cycles.

Dopamine with the properties of fast oxidizing and self-polymerizing in water has been widely applied for surface modification on a variety of substrates (Qiu et al., 2018; Palladino et al., 2019). For example, acrylate or acrylamide copolymer can be covalently bonded onto polydopamine (PDA) using Michael addition, through which these copolymers were coated onto substrates, or one-step co-deposition of dopamine and methacrylate (MA), both provided the substrates excellent antimicrobial, antifouling, and biocompatible properties (Liu and Huang, 2016; Zhang et al., 2017). A rough PDA coating (rPDA) on substrates like glass, stainless steel, plastic, and gauze was verified to display excellent antibacterial effect against Gram-positive S. aureus and Gram-negative E. coli and P. aeruginosa (Su et al., 2016). Indispensable catheters are often used in clinic, but catheter-associated infection and biofilm-forming are significant clinical problems. Chan-Park group prepared a silicon catheter with properties of non-leachable antibacteria and antibiofilm, in which PDA containing multi-density of α-bromoisobutyryl bromide (BIBB) initiators was firstly bond on the catheter, followed by atom-transfer radical polymerization of cationic (3-acrylamidopropyl) trimethylammonium chloride (AMPTMA) or quaternized polyethylenimine methacrylate (Q-PEI-MA) together with a cross-linker (polyethylene glycol dimethacrylate, PEGDMA). This catheter exhibited the capability to prevent bacterial colonization, reducing 1.95 and 1.26 logarithmic levels of methicillin-resistant S. aureus and VRE, respectively, in mouse urethral infection models (Zhou et al., 2017).

Chitosan and its derivatives have been widely studied and applied due to their excellent properties like biocompatibility and antibacterial activity (Sahariah and Másson, 2017). Ti substrate was firstly treated with alkali to form a nanoscale topology under heating, on which dopamine was self-polymerized followed by incorporation of hydroxyapatite (HA) and carboxymethyl chitosan (CMCS) (Yang M. et al., 2018). HA can promote the adhesion of soft tissues while CMCS can work as an antibacterial effect. Moreover, both HA and CMCS are helpful for the adhesion and proliferation of human gingival fibroblasts. The Ti substrate was also modified by chitosan via coupling agent of triethoxysilylpropylsuccinic anhydride, and achieved the antibacterial effectiveness against E. coli and S. aureus (D’Almeida et al., 2018). Another example of chitosan-based coating on polyurethane (PU), polyvinyl fluoride (PVF) and Ti substrates was provided by Neoh group (Li et al., 2017). They treated the substrates with oxygen plasma to introduce hydroxyl groups on the surface, through which dicaprolactone, agarose (AG) and quaternized chitosan (QCS) were covalently bonded via oxidative conjugation of thiol and hydroxyl group under UV irradiation. The component AG reduced the biofilm formation of P. aeruginosa and S. aureus by more than 99%, while the QCS reduced the bacterial contamination by more than 95%.

Polyhexamethylene biguanide is a class of antimicrobial polymers with broad-spectrum antibacterial efficacy against both Gram-positive and Gram-negative bacteria because of its strong positive potential in the molecule. However, this positive potential makes it toxic to tissues/cells. Moreover, the poisonous effects will have to be weighed if leaching out to the environment. Therefore, PHMB is not yet applied in a variety of industries. Several methods were studied to modify the PHMB molecule. For example, PHMB was reacted with allyl PEG to form PEG-b-PHMB, which was grafted onto argon plasma treated silicone resin to give the surface anti-adhesive and antimicrobial properties (Zhi et al., 2017). PHMB can effectively kill bacteria while hydrophilic PEG can prevent bacteria fragments from forming biofilm to ensure a continuous antibacterial effect on the surface. In the in vivo tests with rat infection model, it has been shown that the E. coli was reduced for five logarithms in rat subcutaneous implantation. More importantly, the introduction of PEG reduced the toxicity of PHMB to mammalian cells, which is expected to be applied and developed in the surface coating of medical equipment (Su et al., 2017).

The recent study about surface modification mainly focuses on the innovation of responsive polymer brushes that are responsive to factors like humidity, temperature, pH, etc., in the solution (Chen et al., 2010). Hu et al. (2013) studied polymethacrylate sulfonate betaine (pSBMA) and polymethacrylate carboxylate betaine (pCBMA) as silver-embedded substrates. The product, pCBMA-silver hybrid (CB-Ag), kills bacteria by contact and releases dead bacteria under humid conditions. Poly(N-isopropyl-acrylamide) (PNIPAAm) is a typical thermally responsive polymer (Yaghoubi and Parsa, 2019). Its solubility responds to reversible changes of temperature with a critical temperature of 32°C; Poly(methacrylic acid) (PMAA) is a typical pH-responsive polymer with a large number of carboxyl groups (COOH) on its repeating unit (Qu et al., 2015). The PMAA chain shows a collapsed conformation in an acidic aqueous solution and a swollen conformation in an alkaline aqueous solution. Yan et al. (2016) used the outer layer of pH-responsive poly(methacrylic acid) (PMAA) as a regulator, while the AMP was covalently fixed on the inner layer. The PMAA hydration layer makes the layered surface resistant to initial bacterial adhesion and biocompatible under physiological conditions. When colonize the surface, the bacteria trigger a pH drop that folds the outermost PMAA chain, thus exposing the potentially bactericidal AMP to kill bacteria on demand. When the environmental pH increases, the PMAA chain restores hydrophilicity. The materials, properties, and applications of covalent grafting method were summarized in Table 2.

TABLE 2
www.frontiersin.org

Table 2. Materials, properties, and applications of covalent grafting method.

Layer-by-layer Technology

The technology of LBL assembly refers to the adsorption of electrolyte or complementary compounds on the substrate surface LBL, till the expected density or amount was achieved. This method is simple to operate and has no requirements for the substrate shape. The thickness and properties of the adsorption layer can be adjusted at the molecular scale. The simplicity and versatility of LBL technology attracted abroad interests and has much studied to apply in many fields, particularly in applications on medical devices with various matrix and shapes (Gentile et al., 2015; Shi et al., 2017). For example, it was used to modify silicon substrate with polyacrylic acid (PAA, as the polyanion) and polyetherimide (PEI, as the polycation) to obtain a multilayer PAA/PEI assembled film (Sze Yinn et al., 2012). After modification, the silicon substrate exhibited strong antifouling performance and antimicrobial activity. It will enhance the antifouling if the polyanions exposed (as the outermost layer) and increase the hydrophobicity (more sensitive to protein adsorption) if the longer alkyl chain in PEI is explored.

Chitosan and heparin, an antagonistic compound pair, were applied to modify the coronary stent with LBL technology, where chitosan is positively charged and heparin is negatively charged. After treatment, the modified stent obtained better anticoagulant performance, compared with the primitive stent. It also enhanced the regeneration of vascular endothelial cells (Meng et al., 2009). Polydimethylaminoethyl methacrylate (polycation) and cellobiose dehydrogenase (CDH, polyanion) or polybenzenesulfonic salt (polyanion) were another antagonistic pair. Three LBL layers on polydimethylsiloxane (PDMS) catheters were assembled to obtain a medical surface with excellent antifouling and antimicrobial properties (Vaterrodt et al., 2016). The enzymatic activity of CDH can be adjusted from the depth of embedding in the multilayer and the chemistry of the polymers in the pair.

Chitosan modified by tannic acid and small AMP were assembled LBL on stainless steel plates (Pranantyo et al., 2018). The obtained surface exhibited not only antibacterial activity against E. coli and S. aureus, but also good biocompatibility to primary fibroblasts. Polyethylene terephthalate substrate (PETG, commonly used in the orthodontic appliance) was treated by oxygen plasma to activate the surface, followed by LBL deposition of carboxymethyl cellulose (CMC) and chitosan (Park et al., 2018). The modified PETG with good chemical and physical stability was tested to be super-hydrophilic on the surface. It is able to prevent bacterial adhesion, reduce the bacteria number as high as 75%. The LBL multilayer film of branched PEI and urushiol on various substrates like silicon wafer, PDMS, and glass slide in an acidic solution was found to have antimicrobial activity with the enhanced hydrophobicity and mechanical stability due to the presence of urushiol component (Hyejoong et al., 2015).

In summary, LBL assembly is a simple and universal technique for making antimicrobial coatings on medical devices. The properties of the modified surface can be adjusted by changing polycations and polyanions, the number of multilayers, the thickness of the assembled film, and the chemical composition of the exposed layer. In addition, ingredients can be added into the LBL film to obtain some special functions to meet the requirements of medical devices (Gessner and Vilesov, 2019). It is expectable that the LBL assembly will be a good technology for industrially manufacturing medical devices with promising antimicrobial features in the near future.

Surface Polymer Blending and Other Methods

Surface polymer blending is to mix different polymers without changing their respective properties on the device surface. The final features of the surface can be regulated by changing the objective components or the ratios to meet various requirements of medical equipment. For example, polyhexamethyleneguanidine dodecylbenzenesulfonate (PHMG-DBS) was coated on silicon tube, which was used as a catheter or tracheal intubation. Tested with the method of the international standard (ISO 22196), the results showed that the bacterial counts on the tube were reduced by more than three logarithmic scales. Little leaching of the polymers was detected in water or saline, indicating that the modified layer was quite stable (Ghamrawi et al., 2017). The polylactic acid (PLA) scaffold displayed the bactericidal capability if PHMG was mixed into PLA material. Meanwhile, the biocompatibility of the scaffold from the biodegradable PLA bulk was maintained (Llorens et al., 2015). A polyurethane (PU) catheter modified with poly (diallyldimethylammonium chloride) (pDADMAC) exhibited good antibacterial performance. It reduced the possibility of biofilm formation for eight logarithmic levels against S. aureus and one logarithmic level against P. aeruginosa, compared with PU plain tube (Dirain et al., 2016). Besides, pDADMAC-PU tube displayed good antimicrobial activity in blood plasma. Therefore, it is hopeful to be used as implantable catheters. Quaternized chitosan was added into denture powder during the composite dentures production. This denture was tested to be biocompatible to rat fibroblasts. On the other hand, the quaternized chitosan assisted the dentures to possess the capabilities of corrosion resistance and antibacterial activity, which might provide a promising material candidate for oral denture (Song et al., 2016).

Contact active antimicrobial films were prepared by simply blending cationic amphiphilic block copolymers with commercial polystyrene (PS), where the copolymers were synthesized from 4-{1-[2-(4-methylthiazol-5-yl)ethyl]-1H-1,2,3-triazol-4-yl} butyl methacrylate (TTBM) and contained antimicrobial block bearing flexible side chain. This blended film exhibited excellent antimicrobial activities against Gram-positive, Gram-negative bacteria and fungi. When the copolymer ingredient was up to 50 wt%, a more than 99.999% killing efficiency against the above microorganisms was achieved. Remarkably, the film containing 50 wt% copolymer presented better antimicrobial activity than the films prepared exclusively from the cationic copolymers, which implies a reduction of antimicrobial agents and might provide new insights for the better designing of antimicrobial coatings (Cuervo-Rodriguez et al., 2017). The composite polymers blending of Pluronic F-127, F-127-AMP, and F-127-RGD (arginine-glycine-aspartic acid) with appropriate proportions were coated on silicone rubber. The resulting material showed the antiadhesive and antibacterial properties against S. aureus, S. epidermidis, and P. aeruginosa due to the “brush” topography of the blending polymers while RGD peptides enhanced the adhesion and spreading of human fibroblast cells. This technology is anticipated to be used as an infection-resistant coating for medical implants and devices (Muszanska et al., 2014).

Our group has investigated a novel antimicrobial coating technology, in which the silicon substrate was modified by a cross-linked polyvinylpyrrolidone (PVP) under vacuum, immediately followed by in situ grafting of PVP homopolymers using solvent-free graft-from polymerization method. A total of 99.9% antifouling enhancement was achieved after the catheter was modified while the improved biocompatibility was also observed in a 4-week in vivo tests in mice because of good hydrophilicity of PVP (Sun et al., 2019). Dimethylaminomethylstyrene (DMAMS) or poly (dimethylaminomethylstyrene-co-ethylene glycol diacrylate) [P(DMAMS-co-EGDA)] at different crosslinking ratios was once vaporously deposited on flat and porous substrates, using tert-butyl peroxide (TBP) as an initiator and ethylene glycol diacrylate (EGDA) as a cross-linking agent. A total of 99.99% reduction of bacteria adhesion against B. subtilis and E. coli was achieved with insignificant leaching within experiment interval (Ye et al., 2010, 2011).

Conclusion and Perspective

The antimicrobial coatings are conducive to overcome pathogenic infections in the hospital environment, and provide some specific functions for medical devices. The coated polymers with large molecular weight are superior to those with small molecules in many aspects, such as better stability, less leaching and more functionalized via chemical and physical designs. Particularly, less leaching will be helpful to reduce the poisonous effects on the human body or the pollution on the natural environment.

In this article, we reviewed the mechanism and advantages of antimicrobial polymers, and the potential applications in medical device modifications. There are some technologies to be explored according to the chemistry, appearance and micro-structure of the targeted substrates and equipment. The covalent grafting method allows the connection by covalent bonds between the modification materials and the substrate surface, which can form a surface coating with excellent stability and less leaching; The LBL assembly makes the surface modification easy to achieve. In addition, the stability of the modified layer can be improved by cross-linking reaction while non-covalent connections of polymer blending would give more material choices. These methods have their advantages and can be selected as required.

At present, there are still some challenges for the applications of antimicrobial polymer coatings. Firstly, the mechanism, efficiency, and the relationship between them are not studied clearly, especially at the molecular level. Some functional devices already used in clinic are not perfect, particularly for those implanted in the body for a long time or needed to be reusable. Many antimicrobial medical devices lack adequate in vivo studies and clinically attempts. The results of studies focusing on protein or cell levels are not entirely suitable for the much complex body’s environment, where the biocompatibility of the devices is sometimes more important than the functionality. In short, medical devices modified with antimicrobial polymer coatings are expected to be used, instead of plain metal devices, to promote the devices’ functionality in the future.

Author Contributions

HQ and ZS: writing the manuscript. YZ and MC-P: correcting and proof. YL, PF, XW, WH, and LX: collecting and filing up the references. DH: submitting information of medical devices. All authors contributed to the article and approved the submitted version.

Funding

The authors acknowledge the financial supports from Major Project of 2025 Sci&Tech Innovation (2018B10052) of Ningbo, China, and the Singapore Ministry of Education Tier 3 grant (MOE2018-T3-1-003). This work was also sponsored by K.C. Wang Magna/Education Fund of Ningbo University.

Conflict of Interest

DH was employed by the company Ningbo Baoting Biotechnology Co.

The remaining authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest.

References

Allison, B. C., Applegate, B. M., and Youngblood, J. P. (2007). Hemocompatibility of hydrophilic antimicrobial copolymers of alkylated 4-vinylpyridine. Biomacromolecules 8, 2995–2999. doi: 10.1021/bm7004627

PubMed Abstract | CrossRef Full Text | Google Scholar

Bahman, K., Roudayna, D., Kiarash, G., and Bibi, S. F. B. (2016). Breakthroughs in bacterial resistance mechanisms and the potential ways to combat them. Microb. Pathog. 95, 32–42. doi: 10.1016/j.micpath.2016.02.009

PubMed Abstract | CrossRef Full Text | Google Scholar

Bai, J., Chen, C., Wang, J., Zhang, Y., Cox, H., Zhang, J., et al. (2016). Enzymatic regulation of self-assembling peptide A9K2 nanostructures and hydrogelation with highly selective antibacterial activities. ACS Appl. Mater. Interfaces 8, 15093–15102. doi: 10.1021/acsami.6b03770

PubMed Abstract | CrossRef Full Text | Google Scholar

Baral, A., Roy, S., Ghosh, S., Hermida, M. D., Hamley, I. W., and Banerjee, A. (2016). A peptide based mechano-sensitive, proteolytically stable hydrogel with remarkable antibacterial properties. Langmuir 32, 1836–1845. doi: 10.1021/acs.langmuir.5b03789

PubMed Abstract | CrossRef Full Text | Google Scholar

Bazan, G. C., Zhou, C., Chia, G., Ho, J., Seviour, T., Sailov, T., et al. (2018). Informed molecular design of conjugated Oligoelectrolytes to increase cell affinity and antimicrobial activity. Angew. Chem. 57, 8069–8072. doi: 10.1002/anie.201803103

PubMed Abstract | CrossRef Full Text | Google Scholar

Beaumont, P. E., Brian, M., Emily, G. F., Annie, M., Karen, J. M., Richard, L. G., et al. (2014). Cathelicidin host defence peptide augments clearance of pulmonary Pseudomonas aeruginosa infection by its influence on neutrophil function in vivo. PLoS One 9:e99029. doi: 10.1371/journal.pone.0099029

PubMed Abstract | CrossRef Full Text | Google Scholar

Breukink, E., and de Kruijff, B. (2006). Lipid II as a target for antibiotics. Nat. Rev. Drug Discov. 5, 321–323. doi: 10.1038/nrd2004

PubMed Abstract | CrossRef Full Text | Google Scholar

Brogden, K. A. (2005). Antimicrobial peptides: pore formers or metabolic inhibitors in bacteria? Nat. Rev. Microbiol. 3, 238–250. doi: 10.1038/nrmicro1098

PubMed Abstract | CrossRef Full Text | Google Scholar

Busscher, H. J., Mei, H. C., Guruprakash, S., Jutte, P. C., Jan, J. A. M., Zaat, S. A. J., et al. (2012). Biomaterial-associated infection: locating the finish line in the race for the surface. Sci. Trans. Med. 4:153rv10. doi: 10.1126/scitranslmed.3004528

PubMed Abstract | CrossRef Full Text | Google Scholar

Chen, T., Ferris, R., Zhang, J., Ducker, R., and Zauscher, S. (2010). Stimulus-responsive polymer brushes on surfaces: transduction mechanisms and applications. Prog. Polym. Sci. 35, 94–112. doi: 10.1016/j.progpolymsci.2009.11.004

CrossRef Full Text | Google Scholar

Chin, W., Yang, C., Ng, V. W. L., Huang, Y., Cheng, J., and Tong, Y. W. (2013). Biodegradable broad-spectrum antimicrobial polycarbonates: investigating the role of chemical structure on activity and selectivity. Macromolecules 46, 8797–8807. doi: 10.1021/ma4019685

CrossRef Full Text | Google Scholar

Chin, W., Zhong, G., Pu, Q., Yang, C., Lou, W., Sessions, P. F. D., et al. (2018). A macromolecular approach to eradicate multidrug resistant bacterial infections while mitigating drug resistance onset. Nat. commun. 9:917. doi: 10.1038/s41467-018-03325-6

PubMed Abstract | CrossRef Full Text | Google Scholar

Chindera, K., Mahato, M., Sharma, A. K., Horsley, H., Kloc-Muniak, K., Kamaruzzaman, N. F., et al. (2016). The antimicrobial polymer PHMB enters cells and selectively condenses bacterial chromosomes. Sci. Rep. 6:23121. doi: 10.1038/srep23121

PubMed Abstract | CrossRef Full Text | Google Scholar

Chiumento, S., Roblin, C., Kieffer-Jaquinod, S., Tachon, S., Leprètre, C., Basset, C., et al. (2019). Ruminococcin C, a promising antibiotic produced by a human gut symbiont. Sci. Adv. 5:eaaw9969. doi: 10.1126/sciadv.aaw9969

PubMed Abstract | CrossRef Full Text | Google Scholar

Chuan, Y., Ding, X., Ono, R. J., Lee, H., Hsu, L. Y., Tong, Y. W., et al. (2015). Brush-like polycarbonates containing dopamine, cations, and PEG providing a broad-spectrum, antibacterial, and antifouling surface via one-step coating. Adv. Mater. 26, 7346–7351. doi: 10.1002/adma.201402059

PubMed Abstract | CrossRef Full Text | Google Scholar

Cox, G., and Wright, G. D. (2013). Intrinsic antibiotic resistance: mechanisms, origins, challenges and solutions. Int. J. Med. Microbiol. 303, 287–292. doi: 10.1016/j.ijmm.2013.02.009

PubMed Abstract | CrossRef Full Text | Google Scholar

Cuervo-Rodriguez, R., López-Fabal, F., Gómez-Garcés, J. L., Muñoz-Bonilla, A., and Fernández-García, M. (2017). Contact active antimicrobial coatings prepared by polymer blending. Macromol. Biosci. 17:700258. doi: 10.1002/mabi.201700258

PubMed Abstract | CrossRef Full Text | Google Scholar

D’Almeida, M., Attik, N., Amalric, J., Brunon, C., Renaud, F., Abouelleil, H., et al. (2018). Chitosan coating as an antibacterial surface for biomedical applications. PLoS One 12:e0189537. doi: 10.1371/journal.pone.0189537

PubMed Abstract | CrossRef Full Text | Google Scholar

Das, D., and Pal, S. (2015). Dextrin/poly (HEMA): pH responsive porous hydrogel for controlled release of ciprofloxacin. Int. J. Biol. Macromol. 72, 171–178. doi: 10.1016/j.ijbiomac.2014.08.007

PubMed Abstract | CrossRef Full Text | Google Scholar

Davide, C., Lucio, M., and Arciola, C. R. (2013). A review of the biomaterials technologies for infection-resistant surfaces. Biomaterials 34, 8533–8554. doi: 10.1016/j.biomaterials.2013.07.089

PubMed Abstract | CrossRef Full Text | Google Scholar

Dirain, C. O., Silva, R. C., and Antonelli, P. J. (2016). Prevention of biofilm formation by polyquaternary polymer. Int. J. Pediatr. Otorhinolaryngol. 88, 157–162. doi: 10.1016/j.ijporl.2016.07.004

PubMed Abstract | CrossRef Full Text | Google Scholar

Eckert, R. (2011). Road to clinical efficacy: challenges and novel strategies for antimicrobial peptide development. Future Microbiol. 6, 635–651. doi: 10.2217/fmb.11.27

PubMed Abstract | CrossRef Full Text | Google Scholar

Florin, T., Maracci, C., Graf, M., Karki, P., Klepacki, D., Berninghausen, O., et al. (2017). An antimicrobial peptide that inhibits translation by trapping release factors on the ribosome. Nat. Struct. Mol. Biol. 24, 752–757. doi: 10.1038/nsmb.3439

PubMed Abstract | CrossRef Full Text | Google Scholar

Francolini, I., Donelli, G., Crisante, F., Taresco, V., and Piozzi, A. (2015). Antimicrobial polymers for anti-biofilm medical devices: state-of-art and perspectives. Adv. Exp. Med. Biol. 831, 93–117. doi: 10.1007/978-3-319-09782-4_7

CrossRef Full Text | Google Scholar

Francolini, I., Vuotto, C., Piozzi, A., and Donelli, G. (2017). Antifouling and antimicrobial biomaterials: an overview. APMIS Acta Pathol. Microbiol. ET Immunol. Scand. 125, 392–417. doi: 10.1111/apm.12675

PubMed Abstract | CrossRef Full Text | Google Scholar

Gabriel, G. J., Som, A., Madkour, A. E., Eren, T., and Tew, G. N. (2007). Infectious disease: connecting innate immunity to biocidal polymers. Mater. Sci. Eng. R 57, 28–64. doi: 10.1016/j.mser.2007.03.002

PubMed Abstract | CrossRef Full Text | Google Scholar

Gagnon, M. G., Roy, R. N., Lomakin, I. B., Florin, T., Mankin, A. S., and Steitz, T. A. (2016). Structures of proline-rich peptides bound to the ribosome reveal a common mechanism of protein synthesis inhibition. Nucleic Acids Res. 44, 2439–2450. doi: 10.1093/nar/gkw018

PubMed Abstract | CrossRef Full Text | Google Scholar

Gao, Q., Yu, M., Su, Y., Xie, M., Zhao, X., Li, P., et al. (2017). Rationally designed dual functional block copolymers for bottlebrush-like coatings: in vitro and in vivo antimicrobial, antibiofilm, and antifouling properties. Acta Biomater. 51, 112–124. doi: 10.1016/j.actbio.2017.01.061

PubMed Abstract | CrossRef Full Text | Google Scholar

Gentile, P., Carmagnola, I., Nardo, T., and Chiono, V. (2015). Layer-by-layer assembly for biomedical applications in the last decade. Nanotechnology 26:422001. doi: 10.1088/0957-4484/26/42/422001

CrossRef Full Text | Google Scholar

Gessner, O., and Vilesov, A. F. (2019). Imaging quantum vortices in superfluid helium droplets. Annu. Rev. Phys. Chem. 70, 173–198. doi: 10.1146/annurev-physchem-042018-052744

PubMed Abstract | CrossRef Full Text | Google Scholar

Ghamrawi, S., Bouchara, J. P., Tarasyuk, O., Rogalsky, S., Lyoshina, L., Bulko, O., et al. (2017). Promising silicones modified with cationic biocides for the development of antimicrobial medical devices. Mater. Sci. Eng. C 75, 969–979. doi: 10.1016/j.msec.2017.03.013

PubMed Abstract | CrossRef Full Text | Google Scholar

Gordon, Y. J., Romanowski, E. G., and McDermott, A. M. (2005). A review of antimicrobial peptides and their therapeutic potential as anti-infective drugs. Curr. Eye Res. 30, 505–515. doi: 10.1080/02713680590968637

PubMed Abstract | CrossRef Full Text | Google Scholar

Guo, J., Qin, J., Ren, Y., Wang, B., Cui, H., Ding, Y., et al. (2018). Antibacterial activity of cationic polymers: side-chain or main-chain type? Polym. Chem. 9, 4611–4616. doi: 10.1039/c8py00665b

CrossRef Full Text | Google Scholar

Gustafson, C. T., Boakye-Agyeman, F., Brinkman, C. L., Reid, J. M., Patel, R., Bajzer, Z., et al. (2016). Controlled delivery of Vancomycin via charged hydrogels. PLoS One 11:e0146401. doi: 10.1371/journal.pone.0146401

PubMed Abstract | CrossRef Full Text | Google Scholar

Hamamoto, H., Urai, M., Ishii, K., Yasukawa, J., Paudel, A., Murai, M., et al. (2015). Lysocin E is a new antibiotic that targets menaquinone in the bacterial membrane. Nat. Chem. Biol. 11, 127–133. doi: 10.1038/nchembio.1710

PubMed Abstract | CrossRef Full Text | Google Scholar

Hancock, R., and Sahl, H. (2006). Antimicrobial and host-defense peptides as new anti-infective therapeutic strategies. Nat. Biotechnol. 24, 1551–1557. doi: 10.1038/nbt1267

PubMed Abstract | CrossRef Full Text | Google Scholar

Hanna, D. H., and Saad, G. R. (2019). Encapsulation of ciprofloxacin within modified xanthan gum-chitosan based hydrogel for drug delivery. Bioorg. Chem. 84, 115–124. doi: 10.1016/j.bioorg.2018.11.036

PubMed Abstract | CrossRef Full Text | Google Scholar

Hoque, J., Akkapeddi, P., Yadav, V., Manjunath, G. B., Uppu, D. S. S. M., Konai, M. M., et al. (2015). Broad spectrum antibacterial and antifungal polymeric paint materials: synthesis, structure–activity relationship, and membrane-active mode of action. ACS Appl. Mater. Interfaces 7, 1804–1815. doi: 10.1021/am507482y

PubMed Abstract | CrossRef Full Text | Google Scholar

Hoque, J., Prakash, R. G., Paramanandham, K., Shome, B. R., and Haldar, J. (2017). A biocompatible injectable hydrogel with potent wound healing and antibacterial properties. Mol. Pharm. 14, 1218–1230. doi: 10.1021/acs.molpharmaceut.6b01104

PubMed Abstract | CrossRef Full Text | Google Scholar

Hou, Z., Shankar, Y. V., Liu, Y., Ding, F., Subramanion, J. L., Ravikumar, V., et al. (2017). Nanoparticles of short cationic Peptidopolysaccharide self-assembled by hydrogen bonding with antibacterial effect against multi-drug resistant bacteria. ACS Appl. Mater. Interfaces 9, 38288–38303. doi: 10.1021/acsami.7b12120

PubMed Abstract | CrossRef Full Text | Google Scholar

Hu, R., Li, G., Jiang, Y., Zhang, Y., and Zhang, X. (2013). Silver-zwitterion organic-inorganic nanocomposite with antimicrobial and antiadhesive capabilities. Langmuir 29, 3773–3779. doi: 10.1021/la304708b

PubMed Abstract | CrossRef Full Text | Google Scholar

Hurdle, J. G., O’Neill, A. J., Chopra, I., and Lee, R. E. (2011). Targeting bacterial membrane function: an underexploited mechanism for treating persistent infections. Nat. Rev. Microbiol. 9, 62–75. doi: 10.1038/nrmicro2474

PubMed Abstract | CrossRef Full Text | Google Scholar

Hyejoong, J., Jiwoong, H., Boram, S., Daheui, C., Hyun, P. T., Minwook, C., et al. (2015). Intrinsic hydrophobic cairnlike multilayer films for antibacterial effect with enhanced durability. ACS Appl. Mater. Interfaces 7, 26117–26123. doi: 10.1021/acsami.5b07613

PubMed Abstract | CrossRef Full Text | Google Scholar

Imai, Y., Meyer, K. J., Iinishi, A., Favre-Godal, Q., Green, R., Manuse, S., et al. (2019). A new antibiotic selectively kills Gram-negative pathogens. Nature 576, 459–464. doi: 10.1038/s41586-019-1791-1

PubMed Abstract | CrossRef Full Text | Google Scholar

Itoh, H., Tokumoto, K., Kaji, T., Paudel, A., Panthee, S., Hamamoto, H., et al. (2019). Development of a high-throughput strategy for discovery of potent analogues of antibiotic lysocin E. Nat. Commun. 10:2992. doi: 10.1038/s41467-019-10754-4

PubMed Abstract | CrossRef Full Text | Google Scholar

Jaeger, W., Bohrisch, J., and Laschewsky, A. (2010). Synthetic polymers with quaternary nitrogen atoms—Synthesis and structure of the most used type of cationic polyelectrolytes. Prog. Polym. Sci. 35, 511–577. doi: 10.1016/j.progpolymsci.2010.01.002

CrossRef Full Text | Google Scholar

Jie, Z., William, M., Saide, T., Tiehang, W., Lei, Z., and Weihua, M. (2015). Self-Stratified antimicrobial acrylic coatings via One-Step UV curing. ACS Appl. Mater. Interfaces 7, 18467–18472. doi: 10.1021/acsami.5b04633

PubMed Abstract | CrossRef Full Text | Google Scholar

Junter, G. A., Thébault, P., and Lebrun, L. (2016). Polysaccharide-based antibiofilm surfaces. Acta Biomater. 30, 13–25. doi: 10.1016/j.actbio.2015.11.010

PubMed Abstract | CrossRef Full Text | Google Scholar

Kabirian, F. D. B., Zamanian, A., Hoylaerts, M. F., Mozafari, M., and Heying, R. (2019). Controlled NO-release from 3D-printed small-diameter vascular grafts prevents platelet activation and bacterial infectivity. ACS Biomater. Sci. Eng. 5, 2284–2296. doi: 10.1021/acsbiomaterials.9b00220

CrossRef Full Text | Google Scholar

Kadurugamuwa, J. L., and Beveridge, T. J. (1999). Membrane vesicles derived from Pseudomonas aeruginosa and Shigella flexneri can be integrated into the surfaces of other gram-negative bacteria. Microbiology 145, 2051–2060. doi: 10.1099/13500872-145-8-2051

PubMed Abstract | CrossRef Full Text | Google Scholar

Kamaruzzaman, N. F., Tan, L. P., Hamdan, R. H., Choong, S. S., and Pina, M. D. F. (2019). Antimicrobial polymers: the potential replacement of existing antibiotics? Int. J. Mol. Sci. 20:2747. doi: 10.3390/ijms20112747

PubMed Abstract | CrossRef Full Text | Google Scholar

Konai, M. M., Bhattacharjee, B., Ghosh, S., and Haldar, J. (2018). Recent progress in polymer research to tackle infections and antimicrobial resistance. Biomacromolecules 19, 1888–1917. doi: 10.1021/acs.biomac.8b00458

PubMed Abstract | CrossRef Full Text | Google Scholar

Krizsan, A., Volke, D., Weinert, S., Sträter, N., Knappe, D., and Hoffmann, R. (2014). Insect−derived proline−rich antimicrobial peptides kill bacteria by inhibiting bacterial protein translation at the 70 S ribosome. Angew. Chem. Int. Ed. 53, 12236–12239. doi: 10.1002/anie.201407145

PubMed Abstract | CrossRef Full Text | Google Scholar

Kurowska, M., Eickenscheidt, A., Guevara-Solarte, D., Widyaya, V. T., Marx, F., Al-Ahmad, A., et al. (2017). A simultaneously antimicrobial, protein-repellent, and cell-compatible polyzwitterion network. Biomacromolecules 18, 1373–1386. doi: 10.1021/acs.biomac.7b00100

PubMed Abstract | CrossRef Full Text | Google Scholar

Lam, S. J., O’Brien-Simpson, N. M., Pantarat, N., Sulistio, A., Wong, E. H. H., Chen, Y., et al. (2016). Combating multidrug-resistant Gram-negative bacteria with structurally nanoengineered antimicrobial peptide polymers. Nat. Microbiol. 1:16162. doi: 10.1038/nmicrobiol.2016.162

PubMed Abstract | CrossRef Full Text | Google Scholar

Li, G., and Shen, J. (2000). A study of pyridinium-type functional polymers. IV. Behavioral features of the antibacterial activity of insoluble pyridinium-type polymers. J. Appl. Polym. Sci. 78, 676–684. doi: 10.1002/1097-4628(20001017)78:3<676::aid-app240<3.0.co;2-e

CrossRef Full Text | Google Scholar

Li, M., Mitra, D., Kang, E. T., Lau, T., Chiong, E., and Neoh, K. G. (2017). Thiol-ol chemistry for grafting of natural polymers to form highly stable and efficacious Antibacterial Coatings. ACS Appl. Mater. Interfaces 9, 1847–1857. doi: 10.1021/acsami.6b10240

PubMed Abstract | CrossRef Full Text | Google Scholar

Li, P., Li, X., Saravanan, R., Li, C. M., and Leong, S. S. J. (2012). Antimicrobial macromolecules: synthesis methods and future applications. RSC Adv. 2, 4031–4044. doi: 10.1039/c2ra01297a

CrossRef Full Text | Google Scholar

Li, S., Dong, S., Xu, W., Tu, S., Yan, L., Zhao, C., et al. (2018). Antibacterial hydrogels. Adv. Sci. 5:1700527. doi: 10.1002/advs.201700527

PubMed Abstract | CrossRef Full Text | Google Scholar

Ling, L. L., Schneider, T., Peoples, A. J., Spoering, A. L., Engels, I., Conlon, B. P., et al. (2015). A new antibiotic kills pathogens without detectable resistance. Nature 517, 455–459. doi: 10.1038/nature14098

PubMed Abstract | CrossRef Full Text | Google Scholar

Liu, C. Y., and Huang, C. J. (2016). Functionalization of polydopamine via the Aza-Michael Reaction for antimicrobial interfaces. Langmuir 32, 5019–5028. doi: 10.1021/acs.langmuir.6b00990

PubMed Abstract | CrossRef Full Text | Google Scholar

Liu, L., Huang, Y., Riduan, S. N., Gao, S., Yang, Y., Fan, W., et al. (2012). Main-chain imidazolium oligomer material as a selective biomimetic antimicrobial agent. Biomaterials 33, 8625–8631. doi: 10.1016/j.biomaterials.2012.08.006

PubMed Abstract | CrossRef Full Text | Google Scholar

Liu, L., Wu, H., Riduan, S. N., Ying, J. Y., and Zhang, Y. (2013). Short imidazolium chains effectively clear fungal biofilm in keratitis treatment. Biomaterials 34, 1018–1023. doi: 10.1016/j.biomaterials.2012.10.050

PubMed Abstract | CrossRef Full Text | Google Scholar

Liu, Y., Ding, S., Shen, J., and Zhu, K. (2019). Nonribosomal antibacterial peptides that target multidrug-resistant bacteria. Nat. Prod. Rep. 36, 573–592. doi: 10.1039/c8np00031j

PubMed Abstract | CrossRef Full Text | Google Scholar

Llorens, E., Calderón, S., del Valle, L. J., and Puiggalí, J. (2015). Polybiguanide (PHMB) loaded in PLA scaffolds displaying high hydrophobic, biocompatibility and antibacterial properties. Mater. Sci. Eng. C 50, 74–84. doi: 10.1016/j.msec.2015.01.100

PubMed Abstract | CrossRef Full Text | Google Scholar

Luther, A., Urfer, M., Zahn, M., Müller, M., Wang, S., Mondal, M., et al. (2019). Chimeric peptidomimetic antibiotics against Gram-negative bacteria. Nature 576, 452–458. doi: 10.1038/s41586-019-1665-6

PubMed Abstract | CrossRef Full Text | Google Scholar

Malin, J. J., and de Leeuw, E. (2019). Therapeutic compounds targeting Lipid II for antibacterial purposes. Infect. Drug Resist. 12, 2613–2625. doi: 10.2147/IDR.S215070

PubMed Abstract | CrossRef Full Text | Google Scholar

Meng, S., Liu, Z., Shen, L., Guo, Z., Chou, L. L., Zhong, W., et al. (2009). The effect of a layer-by-layer chitosan–heparin coating on the endothelialization and coagulation properties of a coronary stent system. Biomaterials 30, 2276–2283. doi: 10.1016/j.biomaterials.2008.12.075

PubMed Abstract | CrossRef Full Text | Google Scholar

Mishra, S. K., Basukala, P., Basukala, O., Parajuli, K., Pokhrel, B. M., and Rijal, B. P. (2015). Detection of biofilm production and antibiotic resistance pattern in clinical isolates from indwelling medical devices. Curr. Microbiol. 70, 128–134. doi: 10.1007/s00284-014-0694-5

PubMed Abstract | CrossRef Full Text | Google Scholar

Mookherjee, N., Anderson, M. A., Haagsman, H. P., and Davidson, D. J. (2020). Antimicrobial host defence peptides: functions and clinical potential. Nat. Rev. Drug Discov. 19, 311–332. doi: 10.1038/s41573-019-0058-8

PubMed Abstract | CrossRef Full Text | Google Scholar

Mowery, B. P., Lee, S. E., Kissounko, D. A., Epand, R. F., Epand, R. M., Weisblum, B., et al. (2007). Mimicry of antimicrobial host-defense peptide amp by random copolymers. J. Am. Chem. Soc. 129, 15474–15476. doi: 10.1021/ja077288d

PubMed Abstract | CrossRef Full Text | Google Scholar

Müller, A., Wenzel, M., Strahl, H., Grein, F., Saaki, T. N. V., Kohl, B., et al. (2016). Daptomycin inhibits cell envelope synthesis by interfering with fluid membrane microdomains. Proc. Nat. Acad. Sci. U.S.A 113, E7077–E7086. doi: 10.1073/pnas.1611173113

PubMed Abstract | CrossRef Full Text | Google Scholar

Muszanska, A. K., Rochford, E. T., Gruszka, A., Bastian, A. A., Busscher, H. J., Norde, W., et al. (2014). Antiadhesive polymer brush coating functionalized with antimicrobial and RGD peptides to reduce biofilm formation and enhance tissue integration. Biomacromolecules 15, 2019–2026. doi: 10.1021/bm500168s

PubMed Abstract | CrossRef Full Text | Google Scholar

Neacsu, I. A., Melente, A. E., Holban, A. M., Ficai, A., and Pircalabioru, G. G. (2019). Novel hydrogels based on collagen and zno nanoparticles with antibacterial activity for improved wound dressings. Rom. Biotechnol. Lett. 24, 317–323. doi: 10.25083/rbl/24.2/317.323

CrossRef Full Text | Google Scholar

Ng, V. W. L., Chan, J. M. W., Sardon, H., Ono, R. J., García, J. M., Yi, Y. Y., et al. (2014). Antimicrobial hydrogels: a new weapon in the arsenal against multidrug-resistant infections. Adv. Drug Deliv. Rev. 78, 46–62. doi: 10.1016/j.addr.2014.10.028

PubMed Abstract | CrossRef Full Text | Google Scholar

Orapiriyakul, W., Young, P. S., Damiati, L., and Tsimbouri, P. M. (2018). Antibacterial surface modification of titanium implants in orthopaedics. J. Tissue Eng. 9:204173141878983. doi: 10.1177/2041731418789838

PubMed Abstract | CrossRef Full Text | Google Scholar

Painter, K. L., Hall, A., Ha, K. P., and Edwards, A. M. (2017). The electron transport chain sensitizes Staphylococcus aureus and Enterococcus faecalis to the oxidative burst. Infect. Immun. 85, e659–e617. doi: 10.1128/IAI.00659-17

PubMed Abstract | CrossRef Full Text | Google Scholar

Palladino, P., Bettazzi, F., and Scarano, S. (2019). Polydopamine: surface coating, molecular imprinting, and electrochemistry—successful applications and future perspectives in (bio)analysis. Anal. Bioanal. Chem. 411, 4327–4338. doi: 10.1007/s00216-019-01665-w

PubMed Abstract | CrossRef Full Text | Google Scholar

Park, S., Kim, H. H., Yang, S. B., Moon, J. H., Ahn, H. W., and Hong, J. (2018). A polysaccharide-based antibacterial coating with improved durability for clear overlay appliances. ACS Appl. Mater. Interfaces 10, 17714–17721. doi: 10.1021/acsami.8b04433

PubMed Abstract | CrossRef Full Text | Google Scholar

Paula, O., Copa-Patiño, J. L., Muñoz-Fernandez, M. A., Soliveri, J., Gomez, R., and Mata, F. J. (2008). Amine and ammonium functionalization of chloromethylsilane-ended dendrimers. Antimicrobial activity studies. Org. Biomol. Chem. 6, 3264–3269. doi: 10.1039/b809569h

PubMed Abstract | CrossRef Full Text | Google Scholar

Porter, E. A., Wang, X., Lee, H. S., Weisblum, B., and Gellman, S. H. (2000). Non-haemolytic beta-amino-acid oligomers. Nature 404:565. doi: 10.1038/35007145

PubMed Abstract | CrossRef Full Text | Google Scholar

Pranantyo, D., Xu, L. Q., Hou, Z., Kang, E. T., and Chan-Park, M. B. (2017). Increasing bacterial affinity and cytocompatibility with four-arm star glycopolymers and antimicrobial α-polylysine. Polym. Chem. 8, 3364–3373. doi: 10.1039/C7PY00441A

CrossRef Full Text | Google Scholar

Pranantyo, D., Xu, L. Q., Kang, E. T., and Chan-Park, M. B. (2018). Chitosan-Based peptidopolysaccharides as cationic antimicrobial agents and antibacterial coatings. Biomacromolecules 19, 2156–2165. doi: 10.1021/acs.biomac.8b00270

PubMed Abstract | CrossRef Full Text | Google Scholar

Qiu, W. Z., Yang, H. C., and Xu, Z. K. (2018). Dopamine-assisted co-deposition: an emerging and promising strategy for surface modification. Adv. Colloid Interface Sci. 256, 111–125. doi: 10.1016/j.cis.2018.04.011

PubMed Abstract | CrossRef Full Text | Google Scholar

Qu, Z., Xu, H., and Gu, H. (2015). Synthesis and biomedical applications of poly((meth)acrylic acid) brushes. ACS Appl. Mater. Interfaces 7, 14537–14551. doi: 10.1021/acsami.5b02912

PubMed Abstract | CrossRef Full Text | Google Scholar

Riga, E. K., Vöhringer, M., Widyaya, V. T., and Lienkamp, K. (2017). Polymer-Based surfaces designed to reduce biofilm formation: from antimicrobial polymers to strategies for long-term applications. Macromol. Rapid Commun. 38:1700216. doi: 10.1002/marc.201700216

PubMed Abstract | CrossRef Full Text | Google Scholar

Sabnis, A., Klöckner, A., Becce, M., Hagart, K. L. H., Evans, L. E., Furniss, R. C. D., et al. (2018). Colistin requires de novo lipopolysaccharide biosynthesis for activity. bioRxiv [Preprint] doi: 10.1101/479618

CrossRef Full Text | Google Scholar

Sahariah, P., and Másson, M. (2017). Antimicrobial chitosan and chitosan derivatives: a review of the structure-activity relationship. Biomacromolecules 18, 3846–3868. doi: 10.1021/acs.biomac.7b01058

PubMed Abstract | CrossRef Full Text | Google Scholar

Santos, A. L. S., Sodre, C. L., Valle, R. S., Silva, B. A., Abi-Chacra, E. A., Silva, L. V., et al. (2012). Antimicrobial action of chelating agents: repercussions on the microorganism development, virulence and pathogenesis. Curr. Med. Chem. 19, 2715–2737. doi: 10.2174/092986712800609788

PubMed Abstract | CrossRef Full Text | Google Scholar

Saravolatz, L. D., Stein, G. E., and Johnson, L. B. (2009). Telavancin: a novel lipoglycopeptide. Clin. Infect. Dis. 49, 1908–1914. doi: 10.1086/648438

PubMed Abstract | CrossRef Full Text | Google Scholar

Scherer, K. M., Spille, J., Sahl, H., Grein, F., and Kubitscheck, U. (2015). The lantibiotic nisin induces lipid II aggregation, causing membrane instability and vesicle budding. Biophys. J. 108, 1114–1124. doi: 10.1016/j.bpj.2015.01.020

PubMed Abstract | CrossRef Full Text | Google Scholar

Schneider, T., Kruse, T., Wimmer, R., Wiedemann, I., Sass, V., Pag, U., et al. (2010). Plectasin, a fungal defensin, targets the bacterial cell wall precursor Lipid II. Science 328, 1168–1172. doi: 10.1126/science.1185723

PubMed Abstract | CrossRef Full Text | Google Scholar

Scott, M. G., Dullaghan, E., Mookherjee, N., Glavas, N., Waldbrook, M., Thompson, A., et al. (2007). An anti-infective peptide that selectively modulates the innate immune response. Nat. Biotechnol. 25, 465–472. doi: 10.1038/nbt1288

PubMed Abstract | CrossRef Full Text | Google Scholar

Sellenet, P. H., Bradley, A., Applegate, B. M., and Youngblood, J. P. (2007). Synergistic activity of hydrophilic modification in antibiotic polymers. Biomacromolecules 8, 19–23. doi: 10.1021/bm0605513

PubMed Abstract | CrossRef Full Text | Google Scholar

Shafagh, N., Sabzi, M., and Afshari, M. J. (2018). Development of pH-sensitive and antibacterial gelatin/citric acid/Ag nanocomposite hydrogels with potential for biomedical applications. J. Polym. Res. 25:259. doi: 10.1007/s10965-018-1661-9

CrossRef Full Text | Google Scholar

Shahverdi, A. R., Fakhimi, A., Shahverdi, H. R., and Minaian, S. (2007). Synthesis and effect of silver nanoparticles on the antibacterial activity of different antibiotics against Staphylococcus aureus and Escherichia coli. Nanomedicine 3, 168–171. doi: 10.1016/j.nano.2007.02.001

CrossRef Full Text | Google Scholar

Shi, Q., Qian, Z., Liu, D., and Liu, H. (2017). Surface modification of dental titanium implant by layer-by-layer electrostatic self-assembly. Front. Physiol. 8:574. doi: 10.3389/fphys.2017.00574

PubMed Abstract | CrossRef Full Text | Google Scholar

Si, Z., Lim, H. W., Tay, M. Y. F., Du, Y., Ruan, L., Qiu, H., et al. (2020). A glycosylated cationic block poly(β-peptide) reverses intrinsic antibiotic resistance in all eskape gram-negative bacteria. Angew. Chem. Int. Ed. 59, 6819–6826. doi: 10.1002/anie.201914304

PubMed Abstract | CrossRef Full Text | Google Scholar

Silhavy, T. J., Kahne, D., and Walker, S. (2010). The bacterial cell envelope. Cold Spring Harb. Perspect. Biol. 2:a000414. doi: 10.1101/cshperspect.a000414

PubMed Abstract | CrossRef Full Text | Google Scholar

Smith, P. A., Koehler, M. F. T., Girgis, H. S., Yan, D., Chen, Y., Chen, Y., et al. (2018). Optimized arylomycins are a new class of Gram-negative antibiotics. Nature 561, 189–194. doi: 10.1038/s41586-018-0483-6

PubMed Abstract | CrossRef Full Text | Google Scholar

Smith, R. D., Yago, M., Millar, M., and Coast, J. (2005). Assessing the macroeconomic impact of a healthcare problem: the application of computable general equilibrium analysis to antimicrobial resistance. J. Health Econ. 24, 1055–1075. doi: 10.1016/j.jhealeco.2005.02.003

PubMed Abstract | CrossRef Full Text | Google Scholar

Somma, S., Gastaldo, L., and Corti, A. (1984). Teicoplanin, a new antibiotic from Actinoplanes teichomyceticus nov. sp. Antimicrob. Agents Chemother. 26, 917–923. doi: 10.1128/aac.26.6.917

PubMed Abstract | CrossRef Full Text | Google Scholar

Sondi, I., and Salopek-Sondi, B. (2004). Silver nanoparticles as antimicrobial agent: a case study on E. coli as a model for Gram-negative bacteria. J. Colloid Interface Sci. 275, 177–182. doi: 10.1016/j.jcis.2004.02.012

CrossRef Full Text | Google Scholar

Song, R., Zhong, Z., and Lin, L. (2016). Evaluation of chitosan quaternary ammonium salt-modified resin denture base material. Int. J. Biol. Macromol. 85, 102–110. doi: 10.1016/j.ijbiomac.2015.12.052

PubMed Abstract | CrossRef Full Text | Google Scholar

Spellberg, B., Blaser, M., Guidos, R. J., Boucher, H. W., and Gilbert, D. N. (2011). Policy paper. combating antimicrobial resistance: policy recommendations to save lives. Clin. Infect. Dis. 52(Suppl. 5), S397–S428. doi: 10.1093/cid/cir153

PubMed Abstract | CrossRef Full Text | Google Scholar

Srinivas, N., Jetter, P., Ueberbacher, B. J., Werneburg, M., Zerbe, K., Steinmann, J., et al. (2010). Peptidomimetic antibiotics target outer-membrane biogenesis in Pseudomonas aeruginosa. Science 327, 1010–1013. doi: 10.1126/science.1182749

PubMed Abstract | CrossRef Full Text | Google Scholar

Steve, E., Osborne, V. L., and Huck, W. T. S. (2003). Polymer brushes via surface-initiated polymerizations. Cheminform 33, 14–22. doi: 10.1039/b210143m

PubMed Abstract | CrossRef Full Text | Google Scholar

Su, L., Yu, Y., Zhao, Y., Liang, F., and Zhang, X. (2016). Strong antibacterial Polydopamine coatings prepared by a shaking-assisted method. Sci. Rep. 6:24420. doi: 10.1038/srep24420

PubMed Abstract | CrossRef Full Text | Google Scholar

Su, Y., Zhi, Z., Gao, Q., Xie, M., Yu, M., Lei, B., et al. (2017). Autoclaving-derived surface coating with in vitro and in vivo antimicrobial and Antibiofilm efficacies. Adv. Healthc. Mater. 6:1601173. doi: 10.1002/adhm.201601173

PubMed Abstract | CrossRef Full Text | Google Scholar

Sun, M., Qiu, H., Su, C., Shi, X., Wang, Z., Ye, Y., et al. (2019). Solvent-Free graft-from polymerization of Polyvinylpyrrolidone imparting ultralow bacterial fouling and improved biocompatibility. ACS Appl. Bio Mater. 2, 3983–3991. doi: 10.1021/acsabm.9b00529

CrossRef Full Text | Google Scholar

Sze Yinn, W., Lin, H., Ksenia, T., Jovana, V., Md Nasim, H., Christine, O., et al. (2012). Drastically lowered protein adsorption on microbicidal hydrophobic/hydrophilic polyelectrolyte multilayers. Biomacromolecules 13, 719–726. doi: 10.1021/bm201637e

PubMed Abstract | CrossRef Full Text | Google Scholar

Vasilev, K., Cook, J., and Griesser, H. J. (2014). Antibacterial surfaces for biomedical devices. Expert Rev. Med. Dev. 6, 553–567. doi: 10.1586/erd.09.36

PubMed Abstract | CrossRef Full Text | Google Scholar

Vaterrodt, A., Thallinger, B., Daumann, K., Koch, D., Guebitz, G. M., and Ulbricht, M. (2016). Antifouling and antibacterial multifunctional polyzwitterion/enzyme coating on silicone catheter material prepared by electrostatic layer-by-layer assembly. Langmuir 32, 1347–1359. doi: 10.1021/acs.langmuir.5b04303

PubMed Abstract | CrossRef Full Text | Google Scholar

Vetterli, S. U., Zerbe, K., Müller, M., Urfer, M., Mondal, M., Wang, S., et al. (2018). Thanatin targets the intermembrane protein complex required for lipopolysaccharide transport in Escherichia coli. Sci. Adv. 4:eaau2634. doi: 10.1126/sciadv.aau2634

PubMed Abstract | CrossRef Full Text | Google Scholar

Wahid, F., Wang, H., Lu, Y., Zhong, C., and Chu, L. (2017). Preparation, characterization and antibacterial applicaitons of carboxymethy chitosan/CuO nanocomposite hydrogels. Int. J. Biol. Macromol. 101, 690–695. doi: 10.1016/j.ijbiomac.2017.03.132

PubMed Abstract | CrossRef Full Text | Google Scholar

Wahid, F., Yin, J., Xue, D., Xue, H., Lu, Y., Zhong, C., et al. (2015). Synthesis and characterization of antibacterial Carboxymethyl chitosan/ZnO nanocomposite hydrogels. Int. J. Biol. Macromol. 73, 109–114. doi: 10.1016/j.ijbiomac.2016.03.044

PubMed Abstract | CrossRef Full Text | Google Scholar

Wang, B., Xu, Q., Ye, Z., Liu, H., Lin, Q., Nan, K., et al. (2016). Copolymer brushes with temperature-triggered, reversibly switchable bactericidal and antifouling properties for biomaterial surfaces. ACS Appl. Mater. Interfaces 8, 27207–27217. doi: 10.1021/acsami.6b08893

PubMed Abstract | CrossRef Full Text | Google Scholar

Wang, H., Zhu, H., Fu, W., Zhang, Y., Xu, B., Gao, F., et al. (2017). A High strength self-healable antibacterial and anti-inflammatory supramolecular polymer hydrogel. Macromol. Rapid Commun. 38:1600695. doi: 10.1002/marc.201600695

PubMed Abstract | CrossRef Full Text | Google Scholar

Wimley, W. C. (2010). Describing the mechanism of antimicrobial peptide action with the interfacial activity model. ACS Chem. Biol. 5, 905–917. doi: 10.1021/cb1001558

PubMed Abstract | CrossRef Full Text | Google Scholar

Wong, E. H., Khin, M. M., Ravikumar, V., Si, Z., Rice, S. A., and Chan-Park, M. B. (2016). Modulating antimicrobial activity and mammalian cell biocompatibility with glucosamine-functionalized star polymers. Biomacromolecules 17, 1170–1178. doi: 10.1021/acs.biomac.5b01766

PubMed Abstract | CrossRef Full Text | Google Scholar

Wu, Y., Zhang, D., Ma, P., Zhou, R., Hua, L., and Liu, R. (2018). Lithium hexamethyldisilazide initiated superfast ring opening polymerization of alpha-amino acid N-carboxyanhydrides. Nat. Commun. 9:5297. doi: 10.1038/s41467-018-07711-y

PubMed Abstract | CrossRef Full Text | Google Scholar

Xu, G., Liu, X., Liu, P., Pranantyo, D., Neoh, K. G., and Kang, E. T. (2017). Arginine-based polymer brush coatings with hydrolysis-triggered switchable functionalities from antimicrobial (Cationic) to antifouling (Zwitterionic). Langmuir 33, 6925–6936. doi: 10.1021/acs.langmuir.7b01000

PubMed Abstract | CrossRef Full Text | Google Scholar

Xu, Y., Zhang, K., Reghu, S., Lin, Y., Chan-Park, M. B., and Liu, X. W. (2019). Synthesis of antibacterial glycosylated polycaprolactones bearing imidazoliums with reduced hemolytic activity. Biomacromolecules 20, 949–958. doi: 10.1021/acs.biomac.8b01577

PubMed Abstract | CrossRef Full Text | Google Scholar

Yaghoubi, Z., and Parsa, J. B. (2019). Preparation of thermo-responsive pnipaam-mwcnt membranes and evaluation of its antifouling properties in dairy waste water. Mater. Sci. Eng. C 103:109779. doi: 10.1016/j.msec.2019.109779

PubMed Abstract | CrossRef Full Text | Google Scholar

Yan, S., Shi, H., Song, L., Wang, X., Liu, L., Luan, S., et al. (2016). Nonleaching bacteria-responsive antibacterial surface based on a unique hierarchical architecture. ACS Appl. Mater. Interfaces 8, 24471–24481. doi: 10.1021/acsami.6b08436

PubMed Abstract | CrossRef Full Text | Google Scholar

Yang, K., Han, Q., Chen, B., Zheng, Y., Zhang, K., Li, Q., et al. (2018). Antimicrobial hydrogels: promising materials for medical application. Int. J. Nanomed. 13, 2217–2263. doi: 10.2147/IJN.S154748

PubMed Abstract | CrossRef Full Text | Google Scholar

Yang, M., Jiang, P., Ge, Y., Lan, F., Zhou, X., He, J., et al. (2018). Dopamine self-polymerized along with hydroxyapatite onto the preactivated titanium percutaneous implants surface to promote human gingival fibroblast behavior and antimicrobial activity for biological sealing. J. Biomater. Appl. 32, 1071–1082. doi: 10.1177/0885328217749963

PubMed Abstract | CrossRef Full Text | Google Scholar

Ye, Y., Song, Q., and Yu, M. (2010). Single-step fabrication of non-leaching antibacterial surfaces using vapor crosslinking. J. Mater. Chem. 21, 257–262. doi: 10.1039/C0JM02578J

CrossRef Full Text | Google Scholar

Ye, Y., Song, Q., and Yu, M. (2011). Solventless hybrid grafting of antimicrobial polymers for self-sterilizing surfaces. J. Mater. Chem. 21, 13188–13194. doi: 10.1039/C1JM12050F

CrossRef Full Text | Google Scholar

Yu, K., Lo, J. C., Mei, Y., Haney, E. F., Siren, E., Kalathottukaren, M. T., et al. (2015). Toward infection-resistant surfaces: achieving high antimicrobial peptide potency by modulating the functionality of polymer brush and peptide. ACS Appl. Mater. Interfaces 7, 28591–28605. doi: 10.1021/acsami.5b10074

PubMed Abstract | CrossRef Full Text | Google Scholar

Yuan, Y., Lim, D. S. W., Wu, H., Lu, H., Zheng, Y., Wan, A. C. A., et al. (2019). pH-Degradable imidazolium oligomers as antimicrobial materials with tuneable loss of activity. Biomater. Sci. 7, 2317–2325. doi: 10.1039/c8bm01683f

PubMed Abstract | CrossRef Full Text | Google Scholar

Zhang, C., Ma, M. Q., Chen, T., Zhang, H., Hu, D. F., Wu, B. H., et al. (2017). Dopamine-triggered One-step polymerization and Co-deposition of acrylate monomers for functional coatings. ACS Appl. Mater. Interfaces 9, 34356–34366. doi: 10.1021/acsami.7b11092

PubMed Abstract | CrossRef Full Text | Google Scholar

Zhang, K., Du, Y., Si, Z., Liu, Y., and Chan-Park, M. B. (2019). Enantiomeric glycosylated cationic block co-beta-peptides eradicate staphylococcus aureus biofilms and antibiotic-tolerant persisters. Nat. Commun. 10:4792. doi: 10.1038/s41467-019-12702-8

PubMed Abstract | CrossRef Full Text | Google Scholar

Zhang, S. Y., Zhuang, Q., Zhang, M., Wang, H., and Yuan, J. (2020). Poly(ionic liquid) composites. Chem. Soc. Rev. 49, 1726–1755. doi: 10.1039/c8cs00938d

PubMed Abstract | CrossRef Full Text | Google Scholar

Zhao, J., Ma, L., Millians, W., Wu, T., and Ming, W. (2016). Dual-Functional antifogging/antimicrobial polymer coating. ACS Appl. Mater. Interfaces 8, 8737–8742. doi: 10.1021/acsami.6b00748

PubMed Abstract | CrossRef Full Text | Google Scholar

Zhi, Z., Su, Y., Xi, Y., Tian, L., Xu, M., Wang, Q., et al. (2017). Dual-functional PEG-b-polyhexanide surface coating with in vitro and in vivo antimicrobial and antifouling activity. ACS Appl. Mater. Interfaces 9, 10383–10397. doi: 10.1021/acsami.6b12979

PubMed Abstract | CrossRef Full Text | Google Scholar

Zhou, C., Wu, Y., Thappeta, K. R. V., Subramanian, J. T. L., Pranantyo, D., Kang, E., et al. (2017). In Vivo anti-biofilm and Anti-Bacterial Non-Leachable coating thermally polymerized on cylindrical catheter. ACS Appl. Mater. Interfaces 9, 36269–36280. doi: 10.1021/acsami.7b07053

PubMed Abstract | CrossRef Full Text | Google Scholar

Zhou, M., Qian, Y., Xie, J., Zhang, W., Jiang, W., Xiao, X., et al. (2020). Poly (2−Oxazoline) based functional mimics of peptides to eradicate mrsa infections and persisters while alleviating antimicrobial resistance. Angew. Chem. Int. Ed. 59, 6412–6419. doi: 10.1002/anie.202000505

PubMed Abstract | CrossRef Full Text | Google Scholar

Keywords: antibacterial polymer, mechanism, surface coating, medical device, antibacterial effect

Citation: Qiu H, Si Z, Luo Y, Feng P, Wu X, Hou W, Zhu Y, Chan-Park MB, Xu L and Huang D (2020) The Mechanisms and the Applications of Antibacterial Polymers in Surface Modification on Medical Devices. Front. Bioeng. Biotechnol. 8:910. doi: 10.3389/fbioe.2020.00910

Received: 10 June 2020; Accepted: 15 July 2020;
Published: 11 November 2020.

Edited by:

Changyou Gao, Zhejiang University, China

Reviewed by:

Shifang Luan, Chinese Academy of Sciences (CAS), China
Shun Duan, Beijing University of Chemical Technology, China

Copyright © 2020 Qiu, Si, Luo, Feng, Wu, Hou, Zhu, Chan-Park, Xu and Huang. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.

*Correspondence: Yabin Zhu, zhuyabin@nbu.edu.cn

These authors have contributed equally to this work

Disclaimer: All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.