Skip to main content

CORRECTION article

Front. Audiol. Otol., 07 August 2024
Sec. Clinical Research in Auditory Implants and Hearing Aids
Volume 2 - 2024 | https://doi.org/10.3389/fauot.2024.1469723

Corrigendum: Middle ear anatomy and implant sizes: correlates and the need for uniform implant dimensions

This article is a correction to:

  1. Middle ear anatomy and implant sizes: correlates and the need for uniform implant dimensions

    1. Read original article
\r\nThomas Lenarz&#x;Thomas Lenarz1†Moritz Becker&#x;Moritz Becker1†Athanasia WarneckeAthanasia Warnecke1Anja GiesemannAnja Giesemann2Nils Kristian PrenzlerNils Kristian Prenzler1Uwe SteinhardtUwe Steinhardt3Daniel Schurzig, Daniel Schurzig1,4*
  • 1Department of Otolaryngology, Hannover Medical School, Hannover, Germany
  • 2Department of Neuroradiology, Hannover Medical School, Hannover, Germany
  • 3MED-EL Surgical Solutions, Rangendingen, Germany
  • 4MED-EL Research Center, Hannover, Germany

A corrigendum on
Middle ear anatomy and implant sizes: correlates and the need for uniform implant dimensions

by Lenarz, T., Becker, M., Warnecke, A., Giesemann, A., Prenzler, N. K., Steinhardt, U., and Schurzig, D. (2024). Front. Audiol. Otol. 2:1418921. doi: 10.3389/fauot.2024.1418921

In the published article, there was an error in the Funding statement. A funding source is missing in the current version of the article. The original funding statement is: “The author(s) declare financial support was received for the research, authorship, and/or publication of this article. The study was supported by Deutsche Forschungsgemeinschaft (DFG Exc 2177).” The correct Funding statement appears below.

Funding

The author(s) declare that financial support was received for the research, authorship, and/or publication of this article. The study was supported by Deutsche Forschungsgemeinschaft (DFG Exc 2177). Publication of this manuscript was supported by “Zukunft.Niedersachsen” through the publication fund “NiedersachsenOPEN.”

The authors apologize for this error and state that this does not change the scientific conclusions of the article in any way. The original article has been updated.

Publisher's note

All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article, or claim that may be made by its manufacturer, is not guaranteed or endorsed by the publisher.

Keywords: hearing loss, tympanoplasty, ossiculoplasty, stapesplasty, middle ear reconstruction, anatomical variability, sound conduction

Citation: Lenarz T, Becker M, Warnecke A, Giesemann A, Prenzler NK, Steinhardt U and Schurzig D (2024) Corrigendum: Middle ear anatomy and implant sizes: correlates and the need for uniform implant dimensions. Front. Audiol. Otol. 2:1469723. doi: 10.3389/fauot.2024.1469723

Received: 24 July 2024; Accepted: 25 July 2024;
Published: 07 August 2024.

Approved by:

Frontiers Editorial Office, Frontiers Media SA, Switzerland

Copyright © 2024 Lenarz, Becker, Warnecke, Giesemann, Prenzler, Steinhardt and Schurzig. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.

*Correspondence: Daniel Schurzig, c2NodXJ6aWcuZGFuaWVsJiN4MDAwNDA7bWgtaGFubm92ZXIuZGU=

†These authors have contributed equally to this work and share first authorship

Disclaimer: All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.