This article is a correction to:
Large-Scale Urban Prototyping for Responsive Cities: A Conceptual Framework
Peter Buš- Chair of Information Architecture, Department of Architecture, Institute of Technology in Architecture, Swiss Federal Institute of Technology ETH, Zurich, Switzerland
A Corrigendum on
Large-Scale Urban Prototyping for Responsive Cities: A Conceptual Framework
by Buš, P. (2019). Front. Digit. Humanit. 6:1. doi: 10.3389/fdigh.2019.00001
In the original article, there was a typographical error in the main body of the text.
A correction has been made to the section Participation and Digital Fabrication Methods, subsection Future Perspectives: Scalability of Digital Fabrication Methods, subsection Large-Scale Automatic Building Methods at an Urban Scale—Existing Technologies in Port Areas in Waterfront Cities With Crowd-Driven Building Strategies, paragraph two:
“Fabrication and construction systems that are interconnected via data clouds based on “multi-crowded intelligence” and control can be linked directly with end-users' applications to react appropriately to their requirements (Nolte and Witt, 2014, p. 82–9). This allows the technology to respond to citizens' demands and vice versa.”
The author apologizes for this error and states that this does not change the scientific conclusions of the article in any way. The original article has been updated.
References
Keywords: on-site participation, mass-customized cities, bespoke construction deliveries, large-scale urban prototyping, responsive cities
Citation: Buš P (2019) Corrigendum: Large-Scale Urban Prototyping for Responsive Cities: A Conceptual Framework. Front. Digit. Humanit. 6:13. doi: 10.3389/fdigh.2019.00013
Received: 12 June 2019; Accepted: 12 June 2019;
Published: 26 June 2019.
Approved by:
Frontiers Editorial Office, Frontiers Media SA, SwitzerlandCopyright © 2019 Buš. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.
*Correspondence: Peter Buš, cGV0ZXJidXMmI3gwMDA0MDthcmNoYTNkLmNvbQ==