Skip to main content

REVIEW article

Front. Bioeng. Biotechnol., 04 March 2020
Sec. Synthetic Biology
This article is part of the Research Topic Engineering of Biological Membranes View all 7 articles

Challenges and Perspectives in Chemical Synthesis of Highly Hydrophobic Peptides

  • 1Clemens-Schöpf Institute of Organic Chemistry and Biochemistry, Darmstadt University of Technology, Darmstadt, Germany
  • 2Department of Chemistry and Molecular Biology, Wallenberg Centre for Molecular and Translational Medicine, University of Gothenburg, Gothenburg, Sweden

Solid phase peptide synthesis (SPPS) provides the possibility to chemically synthesize peptides and proteins. Applying the method on hydrophilic structures is usually without major drawbacks but faces extreme complications when it comes to “difficult sequences.” These includes the vitally important, ubiquitously present and structurally demanding membrane proteins and their functional parts, such as ion channels, G-protein receptors, and other pore-forming structures. Standard synthetic and ligation protocols are not enough for a successful synthesis of these challenging sequences. In this review we highlight, summarize and evaluate the possibilities for synthetic production of “difficult sequences” by SPPS, native chemical ligation (NCL) and follow-up protocols.

Introduction

The “difficult sequence” concept has been introduced in the 80’s and was given distinction by Kent and co-workers for peptides that form strong inter- or intra molecular, non-covalent interactions which form insoluble peptide aggregates. “Difficult sequences” are peptide sequences that contain high number of amino acids possessing hydrophobic side chains, so-called β-branched amino acids, including leucine, valine, phenylalanine or isoleucine. Additionally, glycine is known to induce β-sheet packing in combination with afore mentioned amino acids (Paradis-Bas et al., 2016). These sequences tend to form β-sheet or α-helical structures within the molecule and therefore they have high aggregation potential and low solubility in aqueous or organic solvents. This results in a generally difficult handling, synthesis and purification.

One should consider that the chemical production of “difficult sequences” is composed of several key steps, which include SPPS, analytical characterization, purification, fragment ligation and if needed post ligation steps (Figure 1). Each mentioned step is challenging because of the high probability of “difficult sequences” to aggregate and precipitate in conventional solvents (Figure 2). Consequently, solubility of “difficult” peptides and proteins is needed at every key step of their production route. Last decades, researchers developed various methods to achieve this major goal. However, when screening through the literature, unfortunately no unique protocol is available for the synthesis of highly hydrophobic “difficult” peptides and proteins. Nowadays, for every new intended synthesis, special optimization of SPPS, NCL and follow-up protocols are still required.

FIGURE 1
www.frontiersin.org

Figure 1. Schematic way for chemical production of highly hydrophobic peptides with highlighted key steps requiring solubility.

FIGURE 2
www.frontiersin.org

Figure 2. Aggregation of highly hydrophobic peptides as a challenging behavior for chemical synthesis.

In this review we highlight, summarize and evaluate the possibilities for synthetic production of “difficult sequences” by SPPS, native chemical ligation (NCL) and follow-up protocols.

Success Reports in Synthesis of Transmembrane Proteins

Focusing on the class of heavy synthetically accessible proteins such as membrane proteins and considering their structural and functional divergence we will summarize in following efforts undertaken for their synthetic production. It is worth to mention that membrane proteins are encoded by 20–30% of the human genome (Wallin and von Heijne, 1998; Santoni et al., 2000; Krogh et al., 2001; Melnyk et al., 2003; Li et al., 2017). Thereupon, it is not surprising, that because of this relatively high abundance, membrane proteins are of great interest as drug targets. This can be seen in the number of available drugs that target these structures. Around 60% of all FDA-approved drugs address these structures, e.g., GPCRs or ion channels (Yildirim et al., 2007) and the interest in therapeutic applications or for the design of nanopore-based bio-inspired sensors is rising. Surprisingly, until 2003 only about 60 high-resolution structures of transmembrane proteins were available despite their great importance for the cell function and drug design (Melnyk et al., 2003). With the Nobel prize in 2017, awarded to J. Dubochet, J. Frank, and R. Henderson on their outstanding work in cryo-electron-microscopy, this situation changed rapidly (Cressey and Callaway, 2017; Allen, 2019). High profile structures, dynamics and structural studies of various membrane proteins are now available, including works on calcium-selective ion channels (Yoo et al., 2018), voltage-gated potassium channels (Shigematsu et al., 2017; Shigematsu et al., 2019) and a membrane-embedded monomeric yeast ATP synthase (Srivastava et al., 2018).

However, there is still a challenge to provide access to enough material to determine structures and functions of membrane proteins. Two major ways are possible either to chemically synthesize or recombinantly express membrane proteins.

Four major problems in expression of these structures led to the development of strategies using chemical synthesis: (1) protocols for the recombinant expression of hydrophilic structures are often not applicable to hydrophobic proteins, (2) over-expression of membrane proteins usually leads to membrane disruption and thus cell toxicity, (3) extraction and purification are not trivial, and (4) limitations in incorporation of post-translational modifications/isotopic labels (Shen et al., 2011).

Trying to overcome these problems, a bridge between biology and chemistry was required, resulting in an outstanding cooperation. A great advantage of chemical synthesis displays the possibility to custom design of the desired sequence. As soon as the successful synthetic protocol is elaborated, the integration of unnatural amino acids, mutations at arbitrary positions, post-translational modifications (PTMs) and site-specific labels for e.g., solid-state/solution NMR spectroscopy or fluorescence microscopy experiments is readily possible (Sato, 2016). Furthermore, product in the multi-milligram range can be obtained making numerous analytical experiments possible, leading to a better structural and functional understanding. The establishment of a successful chemical synthesis strategy, though, faces some challenges.

Due to the challenges in synthesis of “difficult sequences” especially membrane proteins or their functional parts, only few manuscripts report successful examples and are summarized in Table 1 identifying special features of the synthetic strategy.

TABLE 1
www.frontiersin.org

Table 1. Overview of successful chemical (semi-)synthesis protocols for transmembrane proteins (extended from Shen et al., 2011).

Evaluating the synthetic strategies, a definite shift from Boc-based synthesis to the less toxic Fmoc-based protocols from 2010 is visible which can be connected to the increasing availability of novel NCL strategies. An advancement of the hydrazide mediated NCL is noticeable with NCL yields of 39% (Zheng et al., 2016; Tang et al., 2017). However, this method is hampered by impossible incorporation of removable C-terminal solubilizing tag to the hydrazide moiety. Lately, Baumruck et al. (2018) presents an oxo-ester mediated NCL with almost quantitative NCL yields introducing an interesting prospect by attaching removable solubilizing tag to the oxo-ester. This strategy benefits from the easier handling of highly hydrophobic thioester-forming peptide due to its solubility while purification and analysis prior to NCL. Moreover, no additional steps are required to remove the solubility tag from the peptide sequence, it is automatically removed at NCL conditions. Another example is the use of removable backbone modifications which remain stable throughout NCL, facilitating the reaction, and are readily cleaved off afterward using TFA. Additionally, as seen in the table (Table 1), a preference for arginine-based solubilizing tags can be noticed. A brilliant example of using an arginine tag [phenylacetamidomethyl (Phacm) attached to cysteine] and selective orthogonal removal of the Cys masking group 1,3-thiazolidine-4-carboxylic acid (Thz) without affecting this tag was demonstrated by Jbara et al. (2018). Moreover, most of the presented synthetic strategies include addition of organic solvents such as TFE (Kochendoerfer et al., 1999; Valiyaveetil et al., 2002; Baumruck et al., 2018) or surfactants like OG and DPC (Bianchi et al., 1999; Clayton, 2005; Lahiri et al., 2011; Zheng et al., 2014) to the ligation solution. Finally, Tang et al. presented a synthesis and ligation route toward BM2 that was published as a protocol, establishing a basis for generation of general approach.

The successful synthesis of highly hydrophobic sequences represents the feasibility of the strategies developed during last decades. However, divergence of the methods does not give a standard recipe for scientists on which method is the most applicable for the chemical production of novel sequences. Therefore, we designed a “yes-no” diagram which is intended to facilitate decisions at each production step and in following chapters we highlight mentioned methods in more detail (Figure 3).

FIGURE 3
www.frontiersin.org

Figure 3. “Yes-no” diagram for making decisions in the process of “difficult sequences” chemical production.

Solid Phase Peptide Synthesis and Native Chemical Ligation of “Difficult Sequences”

The introduction of solid phase peptide synthesis (SPPS) in 1963 by Merrifield revolutionized the former state-of-the-art liquid phase strategies and made synthesis of peptides and proteins easier, more efficient and accessible (Merrifield, 1963, 1969). Within the next years, this strategy was continuously improved but it was only in 1970 that Carpino and Han transformed the working scheme by introduction of Fmoc-based strategy (Carpino and Han, 1970) making this the more advantageous and less toxic version of SPPS with respect to usage of hazardous hydrofluoric acid (HF) (Palomo, 2014; Jaradat, 2018). This improvement in reaction conditions led to a rise in prosperous synthesis of peptides following the Fmoc-protocol, making automated synthesis applicable. However, peptide chains of “difficult sequences” exhibiting over 50–60 amino acids remain a challenge even when applying automated peptide synthesis protocols (Kochendoerfer and Kent, 1999; Sheppard, 2003; Palomo, 2014; Behrendt et al., 2016). Microwave assistance is usually advantageous to improve the yield of the final peptide, which however reaches its limits while synthesizing “difficult sequences” (Erdelyi and Gogoll, 2002; Paradis-Bas et al., 2016).

The last decades have witnessed an unprecedented progress in chemical peptide synthesis, however there were still sequences which were difficult or even impossible to synthesize by standard SPPS belonging to class of “difficult sequences,” i.e., amylin (Cooper et al., 1987; Harris et al., 2013), Aβ(1-42) (Bacsa et al., 2010; Kasim et al., 2019), and BM2(1–51) (Baumruck et al., 2018). With respect to SPPS “difficult sequences” are defined as peptides that are poorly solvated while attached to the solid support thus preventing complete deprotection and coupling steps (Tickler and Wade, 2007). This “on resin aggregation” is often associated with sequences that contain β-sheets or α-helices which are mostly represented in membrane-associated peptides/proteins. The type and loading capacity of the resin support has a tremendous influence on the quality of the crude peptide. For hydrophobic peptides non-polar resins such as polystyrene proved to result in peptide products with high quality, yield and purity compared to peptides synthesized on polar resin such as polydimethylacrylamide (Tickler and Wade, 2007). This finding can be explained by the minor aggregation potential of hydrophobic amino acids sequences on polar resins. For the Boc-based SPPS protocol one of the first strategies which is used to optimize involves the acetylation of the imino-group of histidine and was introduced in 1966 by Weygand, subsequently being used by others (Weygand et al., 1966b). Oliveira et al. (1997) investigated the impact of the solvent during coupling. Using DMF, they received a yield of 4% when synthesizing a hydrophobic transmembrane 34-residue peptide fragment of the rat bradykinin receptor. By changing the solvent to 80% NMP/DMSO increased coupling yields (12%) were observed due to improved swelling of the benzhydrylamine (BHAR) resin (loading: 0.34 mmol/g), while testing the Fmoc-based SPPS, no product was obtained.

In general, Boc-based SPPS is known to show better results for the synthesis of “difficult sequences” compared to the Fmoc-based strategy (Schnolzer et al., 2007; Dittmann and Martin, 2017). This is, on one hand, ascribable to TFA, which selectively dissolves the protected peptide chain during SPPS and disrupts formations of secondary structures (Schnolzer et al., 2007). On the other hand, optimizations of Boc-based SPPS protocols using in situ neutralization protocols, favors synthesis of difficult sequences as well. Treatment with TFA leads to the formation of α-ammonium species that needs to be neutralized prior to coupling, but when neutralized, leads to aggregation. Using an in situ protocol, a high concentration of activated amino acid in a polar solvent containing DIEA is added directly, thus minimizing aggregation (Alewood et al., 1997; Schnolzer et al., 2007). One of the limitations using Boc-based SPPS is caused by the continuous use of strong acid during and cleavage from the resin with HF though. Therefore, Boc-based SPPS is not suitable for backbone modifications designed for Fmoc-based SPPS. Nevertheless, Johnson and Kent introduced a photolytically cleavable 4-methoxy-2-nitrobenzyl (2-Nb) and 4-methoxy-2-nitrobenzyl (4-OMe-2-Nb) backbone amide protection groups, illustrated on a model peptide MG(X)GFL (X = 2-Nb or 4-OMe-2-Nb) that can be introduced for the synthesis of “difficult sequences” using the Boc-based protocol (Johnson and Kent, 2006).

With the rising interest, especially regarding therapeutic and pharmaceutical research, a way to chemically synthesize longer peptides was needed since proteins feature 250 amino acids at an average (Kochendoerfer and Kent, 1999; Kimmerlin and Seebach, 2005). To generate an amide bond in solution one must go back to 1953, when Wieland et al. (1953) made use on an intramolecular acyl shift for peptide bond formation. This method was adapted and intensively studied by Kemp and co-workers, laying the foundation of todays’ ligation strategies to fuse two or more peptide fragment (Kemp and Kerkman, 1981; Kemp et al., 1981). NCL is the method of choice for the generation of longer sequences (>50 amino acids) out of two or more fragments and was influenced by the work of Dawson et al. (1994) and Agouridas et al. (2019). At the same time, it decreases limitations of SPPS due to synthesizing shorter peptide fragments and fusing them to yield the native peptide sequence after purification and characterization of each fragment. The basic principle behind the NCL is the reaction of a N-terminal cysteine of one peptide fragment with a C-terminal thioester of another peptide fragment in aqueous phosphate buffers, containing 6 M guanidinium HCl or 8 M urea together with a reducing agent like TCEP or DTT (Dawson and Kent, 2000). However, the greatest obstacle for the NCL of lipophilic peptides is their insolubility in conventional ligation buffers. Last decades, researchers tried also to bypass the Boc-based SPPS protocol that had to be used for the synthesis of the thioester fragment.

Various strategies have been developed to improve SPPS/NCL protocols and to overcome aggregation and limitations of these methods for “difficult sequences” (Paradis-Bas et al., 2016). These methods can be divided into two main groups: (1) modifications of external conditions and (2) internal modifications of the peptide side chain or backbone (Figure 3). In following detailed strategies for optimization of SPPS and NCL for “difficult sequences” will be discussed.

External Conditions

The addition of organic solvents is one of the earliest strategies to dissolve hydrophobic peptides. Polar organic solvents like DMF, DMSO, and NMP are known for their increased solvation potential to inhibit peptide aggregation on the resin. A so-called “magic mixture,” which is composed of DCM, DMF and NMP (1:1:1) has become famous for the synthesis of hydrophobic peptides and was successfully applied for the synthesis of various “difficult sequences” (Tickler and Wade, 2007). Similarly, for the NCL these solvents also found their application as additives to conventional ligation buffers. For example, the NCL of transmembrane peptides such as the rhodopsin II/transducer complex was performed in the presence of DMSO or DMF resulting in 65% yield (Dittmann et al., 2010, 2014). This strategy was also successfully applied for the ligation of various other hydrophobic proteins, such as small hemithioindigo (HTI)-based chromopeptide (Kitzig and Ruck-Braun, 2017), and O-acyl isopeptides (Sohma et al., 2011).

Another promising approach is the addition of 2,2,2-trifluoroethanol (TFE) or 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP) to N,N-dimethylformamide (DMF) during the coupling steps in order to increase the polarity and solvation properties of the solvent. Examples for this strategy represent the synthesis of d-Ala17-phGnRH(14–36) (Milton and Milton, 1990) or model “difficult sequences” (Yamashiro et al., 1976). Fluorinated alcohols are also known as effective solvents for hydrophobic peptides, which can be used during analytics and purification, namely key steps two and three, of the chemical production (Figure 1; Tiburu et al., 2009; Bondarenko et al., 2010; Zhang et al., 2018). The reason for that is that TFE or HFIP mimic the natural environment of the cell membrane thus mediate the dissolution of membrane-associated peptides. Intra-molecular H-bonds can be stabilized through fluorinated alcohols, preserving especially the α-helical structure of the transmembrane region (Hirota et al., 1996). Fluorinated alcohols such as TFE, HFIP or 1-phenyl-2,2,2-trifluoroethanol (PhTFE) also found their application in NCL as co-solvent. Impressing examples of this approach were published by M. Hong et al. and W. DeGrado et al. who used TFE and HFIP as co-solvents for the NCL during the synthesis of influenza virus A proton channel AM2 (Kochendoerfer et al., 1999; Kwon et al., 2015) and in our studies for the synthesis of influenza virus B proton channel BM2(1–51) fragment (Baumruck et al., 2018).

Chaotropic agents belong to a group of water-soluble ingredients which can disturb hydrogen bonds between water molecules and proteins. Examples for chaotropic agents include various salts, detergents, polar organic solvents or urea and thiourea. Additionally, chaotropic ions such as Li+, Mg2+, SCN, and ClO4 can be added to reduce non-covalent hydrophobic interactions and consequently prevent precipitation of poor-soluble peptides (Dawson et al., 1994; Zhang and Cremer, 2006).

The effect of ions on the stability of secondary and tertiary structures and on the solubility of peptides were intensively studied by multiple groups (Dawson et al., 1994) and summarized in the Hofmeister series (Cacace et al., 1997). The use of chaotropic agents is of great importance for NCL reaction with the first reported NCL studies by Kent and co-workers already performed in guanidinium hydrochloride-based buffers (Dawson et al., 1994). Nowadays, the majority of ligations are executed in aqueous buffers containing high concentrations of chaotropic agents like urea or guanidinium hydrochloride (Paradis-Bas et al., 2016). These two ingredients prevent the formation of unfavorable secondary structures thus enhancing the solubility of peptides. However, ligation of hydrophobic peptides is strongly limited in these standard ligation buffers due to the poor solubility of the peptide/protein fragments.

In contrast to chaotropic agents, surfactants are applied to mimic the natural environment of cell membranes. In aqueous solutions surfactants form micelles or lipid liposomes in which hydrophobic transmembrane peptides can easily be incorporated. Several studies demonstrated that transmembrane proteins spontaneously fold while incorporated in an artificial lipid membrane. This behavior is utilized in analytical applications such as circular dichroism (CD) spectroscopy and solution nuclear magnetic resonance (NMR) studies (Engelman and Steitz, 1981; Ladokhin et al., 2010; Mandala et al., 2019). In order to aid NCL multiple surfactants were investigated to increase the solubility of transmembrane peptides in guanidinium chloride or urea as additives to ligation buffer. Main advantage accompanied using surfactants is their commercial accessibility and fast experimental screening. Examples for frequently used surfactants are 1-palmitoyl-2-oleoylphosphatidylcholine (POPC) (Otaka et al., 2004), n-octyl glycoside (OG) and dodecylphosphocholine (DPC) (Lahiri et al., 2011). An impressive example for the value of this strategy was made by Becker and co-workers who used n-octyl glycoside (OG) as an additive for the NCL to synthesize transmembrane peptide diacylglycerol kinase (DAGK) comprising 121 amino acids (Lahiri et al., 2011). Other successful examples were reported using SDS for the NCL of the potassium channel KcsA comprising 125 amino acids (Valiyaveetil et al., 2002). Although surfactants are applied as additives for protein and peptide solubilization for many years, several publications indicate that they could interfere with RP-HPLC columns and reduce the signal intensity in mass spectrometry (Loo et al., 1994; Paradis-Bas et al., 2016).

During the last decade ionic liquids (ILs) gathered much attention as potent reaction and solubilizing media for biomaterials, including hydrophobic peptides and cellulose (Swatloski et al., 2002; Miloslavina et al., 2009). Several promising examples were published where ILs, in particular 1-ethyl-3-methylimidazolium acetate ([C2mim][OAc]) was described as advantageous solvent for oxidative folding of highly hydrophobic cysteine-rich peptides (e.g., conotoxins) or NCL (Miloslavina et al., 2009; Tietze et al., 2012; Böhm et al., 2014). The [C2mim][OAc] was used as media for the NCL of the 66-meric tridegin, which is known as an inhibitor of human blood coagulation factor XIIIa (Böhm et al., 2012). However, N-heterocyclic carbenes (NHC) which are present in the neat [C2mim][OAc], generated by subtraction of C2 proton by relatively basic acetate anion, initiated formation of a high percentage of by-products and therefore prevented the breakthrough of this method. In 2017, we identified those NHC-induced side-products and studied conditions where the formation of those side-products can be entirely suppressed, therefore enabling using [C2mim][OAc] as a solvent during NCL (Baumruck et al., 2017). Additionally, Wehofsky et al. (2008) reported protease-catalyzed ligation in the presence of 60% of 3-methylimidazolium dimethylphosphate in buffer solution with high turnover rates.

Internal Modifications

Temporary internal (structural) modifications of the peptide sequence have revolutionized the use of the Fmoc-based SPPS protocol on “difficult sequences.” Today several different backbone modifications exist mainly focused to prevent side-reaction such as diketopiperazine or aspartimide formation (Paradis-Bas et al., 2016). Many of them offer also the advantage to reduce peptide aggregation on solid support thus facilitate the accessibility of the N-terminus during SPPS (Tickler and Wade, 2007). Depending on their structure, most backbone modifications can be classified in ortho-hydroxybenzyl groups [Hmb (Hyde et al., 1994), Hmsb (Huang and Liu, 2015), Hbz (Johnson and Quibell, 1994), Hnb (Meutermans et al., 1999)] ortho-mercaptobenzyl groups [Dmmb (Kawakami et al., 2001), Tmb (Offer et al., 2002)] and methoxybenzyl groups [Dmb (Zahariev et al., 2006), Mmsb (Thennarasu and Liu, 2010)]. Additionally, several other protection groups were developed which cannot be assigned to one of the aforementioned backbone modifications such as EDOTn (Isidro-Llobet et al., 2008), Dcpm (Carpino et al., 2009), Etom (Fernandez-Llamazares et al., 2014), 2-furfury and 2-thlenylmethyl (Johnson et al., 1995) groups. In the 1990ies, one of the first backbone amide protection groups, which remarkably improved handling of aggregation-prone peptides, was developed, N,O-bis(Fmoc) derivates of Nα-2-hydroxy-4-methoxybenzylamino acids (Hmb) (Zeng et al., 1997). This group demonstrated the ability to facilitate synthesis of an acyl carrier protein, a 65–74 decapeptide that showed strong inter-chain association (Weygand et al., 1966b; Quibell, 1999). Thus, the Hmb moiety and its derivates were developed, which were frequently used in Fmoc-based SPPS (Simmonds, 1996; Table 2).

TABLE 2
www.frontiersin.org

Table 2. Backbone amide protecting groups that can be removed during cleavage.

Further strategies aiming to decrease on-resin aggregation during SPPS include the use of pseudoprolines (Mutter et al., 1995; Wohr and Mutter, 1995) or O-acyl isopeptides (Horikawa et al., 1998) (depsipeptides) (Figure 4). Mutter’s lab introduced pseudoprolines incorporating them into a sequence with numerous building blocks being commercially available (Mutter et al., 1995; Wohr and Mutter, 1995). The cyclic oxazolidine (Ser, Thr) thiazolidine (Cys) ring system shows structural similarities with Pro, resulting in a “kink” conformation within the growing peptide chain preventing aggregation, self-association and a β-sheet formation (Wohr et al., 1996). An alternative strategy to interrupt unfavorable secondary structures is the synthesis with O-acyl isopeptides which were developed by Sohma et al. (2011). This strategy relies on the introduction of oxo-esters over Ser or Thr residues within the primary sequence. The strategy was successfully applied for SPPS of several lipophilic peptides (Kawashima et al., 2014).

FIGURE 4
www.frontiersin.org

Figure 4. Example of pseudoproline (A) and isopeptide (B) strategies as temporary structural modifications.

Apart from their structure, backbone modifications can be classified into two categories: (1) modifications, removable during cleavage from the resin (Table 2) and (2) modifications, removable after cleavage from the resin (Table 3).

TABLE 3
www.frontiersin.org

Table 3. Backbone amide protecting groups that remain on the sequence after cleavage from solid support and require special conditions to be detached.

The first group of modifications only facilitates the SPPS by preventing on-resin aggregation of “difficult sequences” (Table 2). Although, the second group, includes modifications which are stable during final cleavage from solid support and additionally improves the handling and purification of poor-soluble peptides after cleavage from the solid support (Table 3).

Lately, the use of solubilizing units/tails/tags gained great attention. These units are usually made of multiple hydrophilic amino acids that are attached to the hydrophobic sequence and are apparently designed toward facilitating purification via HPLC, peptide condensation or NCL. Especially the use of polyarginine and polylysine units is widely represented in literature (Zheng et al., 2014). Solubilizing tags can be attached to the N-terminus, C-terminus or side chain of amino acids in a sequence. N-terminal tags, are barely represented in literature and mostly used to increase the solubility of hydrophobic peptides for purification. Examples for N-terminal tags were reported for different model peptides (Englebretsen and Robillard, 1999; Tsuda et al., 2018b) and for the insulin A chain (Disotuar et al., 2019). C-terminal tags, belong to the most applied strategies to increase the solubility of poorly soluble peptides. In Englebretsen and Alewood (1996) were the first who tested a C-terminal poly-glycine-arginine tail to increase the solubility of the peptide CP10 (42–55). All these first approaches were mainly used to aid the purification of hydrophobic peptides via HPLC. Further examples of similar strategies were published for insulin glargine (Hossain et al., 2009), NY-ESO-1 (Harris and Brimble, 2010) or Q11 (Paradis-Bas et al., 2015). Especially useful is the C-terminal tag strategy in combination with MPA-thioester peptides (3-mercaptopropionic acid, MPA). Thereby, the solubilizing tag can be directly attached at the MPA moiety which is removed during NCL. Successful examples for this method were reported for the ligation of HIV 1 protease (Johnson et al., 2007), ORL1 (288–370) (Sato et al., 2005), DEN2C (21–100) (Zhan et al., 2013), and many more (Sohma et al., 2008; Yang et al., 2013). However, major disadvantage of MPA-thioester peptides is their compatibility with Boc-based SPPS. A useful alterative to MPA-thioester peptides are Dbz and MeDbz groups which are compatible with Fmoc-based SPPS. This novel approach was used for the ligation of SUMO-2 and ubiquitin (1–93) (Bondalapati et al., 2017). In 2018, we introduced another Fmoc-based SPPS compatible C-terminal tag (polylysine, miniPEG) strategy using thioester-forming oxo-esters by introduction of 2-hydroxy-3-mercaptopropionic acid (Hmp) group for the ligation of the proton channel M2 of influenza virus B resulting in almost quantitative ligation yield (Baumruck et al., 2018).

Beneath C-terminal solubilizing tags the second most applied method is the attachment of side-chain or backbone tags to hydrophobic peptides. Side-chain tags, can be introduced during or after sequence elongation and after the fragment is prepared. A recent publication by Tsuda et al. (2019b) described a method using trityl-Lys (Trt-K) and trityl-Arg (Trt-R) solubilizing tags that can be inserted directly to the unprotected peptide and thus serves as an aid during NCL. They were able to successfully synthesize Cp149-NH2, a Hepatitis B capsid protein out of three fragments. A further recently designed method was presented by Brailsford et al. (2018) who introduced a novel arginine-modified acetamidomethyl tag (AcmR). Making use of the orthogonal Cys protection group Acm, which remains bound during final cleavage and removed in an additional step using mild reducing conditions. Here, the acetyl group is functionalized by introduction of polyarginine residues. The successful synthesis of a β-subunit of the human thyroid-stimulating hormone highlights the applicability of this method. A further way of utilizing a side chain solubilizing unit coupled to a cysteine moiety was recently presented by the Brick group. They introduced a phenylacetamidomethyl tag (Phacm) containing three arginine units and efficiently synthesized the copper storage protein CSP-1 (Jbara et al., 2018). Examples of solubilizing tags and even combination of both strategies – removable backbone modifications and solubilizing tags – are given in the Table 4 (reviewed in detail by Zhao et al., 2019).

TABLE 4
www.frontiersin.org

Table 4. Examples of combinations of removable backbone modifications and solubilizing tags.

Follow-Up Protocols

Synthesis and NCL of highly hydrophobic peptides and proteins is usually not straight-forward and requires several tools. The earlier presented solubilizing units are only one factor of several to facilitate the complete synthesis. In the following, methods will be presented that provide either the appropriate ligation side or to mask native cysteines within the sequence that are not used as ligation sites. Cysteines are not highly abundant within sequences of highly hydrophobic peptides/proteins, such as membrane proteins, necessitating incorporation of a reversable mutation within the peptide sequence. Furthermore, sequences of > 50 amino acids often need to be divided into two or more fragments. This approach though, requires masked ligation sites to enable the second or third ligation.

The classical NCL by Kent and colleges can only be performed if Cys-residue is located at the ligation site. Unfortunately, the Cys is underrepresented in most native peptide sequences with an occurrence of only 2.26% in mammals (Miseta and Csutora, 2000). To circumvent this issue of not having a Cys-residue within the sequence or at the desired ligation site, other amino acids must be found that can replace a cysteine residue and readily converted in the natural occurring moiety. The mild desulfurization of Cys to Ala residues, which are much more frequently represented in native sequences, expanded the limitations of the NCL (Pentelute and Kent, 2007). Further, the Payne lab and other groups introduced new proteinogenic amino acids aside from Ala, utilizing Asn (Sayers et al., 2015), Asp (Thompson et al., 2013), and Glu (Cergol et al., 2014) at a ligation site. Canne et al. (1996) introduced another way of circumventing the cysteine moiety by auxiliarated NCL introduced with the Nα -(ethanethiol) and Nα -(oxyethanethiol)-peptide. In Loibl et al. (2018) applied this protocol for cleavage of 2-mercaptoethyl auxiliary group. A recently introduced NCL approach, the diselenide-selenoester ligation (DSL) opens up possibilities for using further amino acids and will be elucidated in the outlook.

The earliest reports about peptide desulfurization include metal-related catalysts such as Raney nickel or palladium/aluminum oxide (Yan and Dawson, 2001). However, the usage of these metals have had some drawbacks regarding the yield, epimerization and the incompatibly with the cysteine masking group L-thiazolidine-4-carboxylic acid (Thz). That is why this method was developed further by Wan and Danishefsky, who introduced the metal-free desulfurization using TCEP and VA-044 (2,2′-azobis(2-(2-imidazoline-2-yl)propane)dihydrochloride) (Wan and Danishefsky, 2007). This widely applied method is usually performed in aqueous 6 M guanidinium hydrochloride buffer which can also be used for NCL. Nowadays, this metal-free approach is the most widely used method for NCL-desulfurization protocol and was successfully applied for multiple peptides (Jin and Li, 2018). However, despite all advantages, poor soluble peptides remain an issue due to their insolubility in conventional buffer systems. For a complete desulfurization, hydrophobic peptides need to be entirely dissolved in the buffer solution. Comparable to NCL, internal and external conditions exist to circumvent solubility problems during desulfurization. Examples for internal strategies were published by Tsuda et al. (2018a) using a side-chain polylysine tag to increase the solubility during desulfurization. Other examples include the addition of a polyarginine tag at the side chain of amyloid-beta (Aβ) peptides (Zuo et al., 2016) or polylysine tags over a Ddae-linker for the synthesis of the 97-residue co-chaperonin GroES (Fulcher et al., 2019). External conditions are usually based on the addition of co-solvents such as fluorinated alcohols to the desulfurization buffer. In 2018 we reported the use of HFIP as ideal co-solvent for desulfurization of [Cys22]BM2(1–51) with a yield of 99% (Baumruck et al., 2018). A further promising approach offers ionic liquids as possible media for peptide desulfurization. Studies performed in [C2mim][OAc] gave first evidence that Cys can be desulfurized to Ala within the sequence of unprotected peptides (Baumruck et al., 2017).

When applying desulfurization conditions, all other present cysteines need to be orthogonally protected. For that, the most common protection group is the acetamidomethyl (Acm) group proposed in 1971 and is applicable to both Boc- and Fmoc-based SPPS (Veber et al., 1968; Veber et al., 1972). To retain the native sequence, cleavage of the Acm-group needs to be performed. Table 5 gives an overview of the various, diversified methods to remove the Acm-group, with many methods also aiming for the generation of distinct disulfide-bridges within peptide sequences. Therefore, the mentioned in Table 5 methods can be applied for “difficult sequences.”

TABLE 5
www.frontiersin.org

Table 5. Various protocols for the removal of the Acm protection group.

Another, so-called “masking” group for cysteine is Thz-group, mentioned earlier in this section. When NCL must be performed in multiple steps, the Thz group helps to reversibly protect N-terminal cysteine. This group can be cleaved afterward using methoxyamine⋅HCl at pH 4 (Monbaliu and Katritzky, 2012). An additional benefit of the Thz conversion is the suitability to perform the transformation within the ligation buffer following a one-pot approach (Bang and Kent, 2004; Fauvet et al., 2013). Therefore, to use Thz in the chemical synthesis strategy followed by NCL ligation conditions must be optimized and described above. Targeting a faster unmasking reaction (usually 8 h with methoxyamine), the Brik lab introduced an extremely fast (15 min) palladium-based Thz conversion presenting efficient synthesis of Lys34-ubiquitinated histone protein, H2B (Jbara et al., 2016).

Additionally, another interesting approach was currently employed to synthesize the H2B protein (Jbara et al., 2014). The solid phase chemical ligation (SPCL) makes on-resin NCL possible and, with respect to desulfurization, is advantageous because reactants that would interfere and decrease the efficiency are washed off, e.g., MPAA.

Hot Topics and Outlook

The great potential and importance of membrane proteins in elucidation of their structures and function as well as development of novel drug leads targeting membrane proteins causes research in this area to flourish. Moreover, need in being able to incorporate post-translational modifications, isotopic labels or peptide-mimetics rely on robust approaches of chemical synthesis (Zheng et al., 2016).

Schmidt et al. (2017) recently summarized the possibilities of ligases to perform amide bond formation during ligation reactions in a review opening a platform for biological engineering. In a very recent review, Nuijens et al. (2019) discuss advantages and disadvantages of enzymes used for ligation and cyclization suggesting a sortase-mediated ligation strategy to be straightforward. They also elucidate the possibility to use enzymes for cyclization and labeling, showing the versatile applications of engineered and naturally occurring enzymes.

With great interest to solve solubility problems during NCL, but also handling of peptides, ionic liquids seem to have enormous potential (Tietze et al., 2012; Baumruck et al., 2017). Besides SPPS and NCL, purification of these “difficult sequences” is not trivial. Apart from the usage of the already mentioned alternative organic solvents application at RP-HPLC to purify fragments and products, just recently an alternative approach has been introduced by using catch-and-release purification method which is based on base-labile cleavable linkers using oxime-based and hydrazine-based ligation chemistry (Reimann et al., 2019).

Recently, a new and rapid ligation method was presented: the additive-free diselenide-selenoester ligation (DSL) (Mitchell et al., 2015). Making use of a peptide selenoester and a peptide diselenide bearing an N-terminal (Sec)2 unit, the thiol-free ligation was completed within minutes. Giving an example of the time-saving advantage this method provides, Mitchell et al. were able to completely synthesize an early secretory antigenic protein-6 (ESAT-6) within only 16 h including a deselenization of the Sec unit to Ala (Mitchell et al., 2015). The deselenization reaction is further employable to other amino acids, such as aspartate and glutamate auxiliaries (Conibear et al., 2018) and is even employable to poorly soluble compounds. This is demonstrated by synthesis of the poorly soluble therapeutic lipopeptide tesamorelin and variants of the transmembrane lipoprotein phospholemman FXYD1 using this method and nanomolar concentrations circumventing the integration of solubilizing units (Chisholm et al., 2019). Broadening the ligation toolkit, the α-ketoacid-hydroxylamine (KAHA) ligation route is also employable to poorly soluble and highly hydrophobic proteins such as IFITM3 (see Table 1) or the antibacterial cyclic AS-48 protein (Rohrbacher et al., 2017) making use of 5-oxaproline within acidic conditions. The KAHA ligation is applicable to synthesized fragments from Fmoc-synthesis, integrated solubilizing tags and based on ligation conditions in organic solvents and thus presents an alternative to fragments facing solubility problems.

All presented methods and protocols are based on traditional “batch” chemistry but a novel approach toward continuous-flow peptides synthesis (Mijalis et al., 2017) or ligation and desulfurization (Chisholm et al., 2018). They presented an in-line flow-based ligation and desulfurization protocol and presented synthesis of enfuvirtide (HIV drug) and the diagnostic agent somatorelin. This procedure could be interesting in the future especially considering scale-up of ligation reactions.

Having given an overview of synthetic strategies and follow- up protocols available to date, it is obvious that there is no one-fits-all approach. Membrane proteins are of great interest and thus robust synthesis routes will help to investigate structural behavior leading to a better understanding of the diagnostic points of action and possibilities. Limitations in a straight-forward design are the extreme hydrophobic regions within the protein sequences that lead to aggregation on resin making synthesis challenging. Overcoming this limitation, NCL enables segmentation of the sequence into two or more fragments that can be successively condensed. Especially transmembrane regions are challenging to be synthesized even out of smaller fragments, incorporation of removable solubilizing tags represent a method to facilitate handling, synthesis and purification. However, the general protocols and a variety of choice can be used in order to meet a right choice for the synthesis of any particular “difficult sequences” especially membrane proteins of functional parts of them (Figure 3).

Author Contributions

LM wrote the first draft of the manuscript. AB prepared the figures and additional references, and wrote parts of the manuscript. HZ read and provided comments for the manuscript, and prepared the tables. AT designed the concept, wrote, revised, corrected, and approved the manuscript. All authors contributed to the manuscript revision, read and approved the submitted version.

Funding

Wallenberg Centre for Molecular and Translational Medicine to Knut and Alice Wallenberg Foundation and University of Gothenburg, Liebig Fellowship of the Fonds der Chemischen Industrie and LOEWE project “iNAPO” funded by the Ministry of Higher Education, Research and the Arts (HMWK) of the Hessen state, are gratefully acknowledged (AT).

Conflict of Interest

The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest.

References

Agouridas, V., Mahdi, O. E., Diemer, V., Cargoët, M., Monbaliu, J.-C. M., and Melnyk, O. (2019). Native chemical ligation and extended methods: mechanisms, catalysis, scope, and limitations. Chem. Rev. 119, 7328–7443. doi: 10.1021/acs.chemrev.8b00712

PubMed Abstract | CrossRef Full Text | Google Scholar

Alewood, P., Alewood, D., Miranda, L., Love, S., Meutermans, W., and Wilson, D. (1997). Rapid in situ neutralizaion protocols for Boc and Fmoc solid-phase chemistries. Methods Enzymol. 289, 14–29. doi: 10.1016/s0076-6879(97)89041-6

CrossRef Full Text | Google Scholar

Allen, J. P. (2019). Recent innovations in membrane-protein structural biology. F1000Res 8:F10000.

Google Scholar

Bacsa, B., Bosze, S., and Kappe, C. O. (2010). Direct solid-phase synthesis of the beta-amyloid (1-42) peptide using controlled microwave heating. J. Org. Chem. 75, 2103–2106. doi: 10.1021/jo100136r

PubMed Abstract | CrossRef Full Text | Google Scholar

Bang, D., and Kent, S. B. H. (2004). A one-pot total synthesis of crambin. J. Pept. Sci. 10, 93–93.

Google Scholar

Baumruck, A. C., Tietze, D., Stark, A., and Tietze, A. A. (2017). Reactions of sulfur-containing organic compounds and peptides in 1-ethyl-3-methyl-imidazolium acetate. J. Org. Chem. 82, 7538–7545. doi: 10.1021/acs.joc.7b01272

PubMed Abstract | CrossRef Full Text | Google Scholar

Baumruck, A. C., Tietze, D., Steinacker, L. K., and Tietze, A. A. (2018). Chemical synthesis of membrane proteins: a model study on the influenza virus B proton channel. Chem. Sci. 9, 2365–2375. doi: 10.1039/c8sc00004b

PubMed Abstract | CrossRef Full Text | Google Scholar

Behrendt, R., White, P., and Offer, J. (2016). Advances in FMOC solid-phase peptide synthesis. J. Pept. Sci. 22, 4–27. doi: 10.1002/psc.2836

PubMed Abstract | CrossRef Full Text | Google Scholar

Bianchi, E., Ingenito, R., Simon, R. J., and Pessi, A. (1999). Engineering and chemical synthesis of a transmembrane protein: the HCV protease cofactor protein NS4A. J. Am. Chem. Soc. 121, 7698–7699. doi: 10.1021/ja9901617

CrossRef Full Text | Google Scholar

Blaakmeer, J., Tijsse-Klasen, T., and Tesser, G. I. (1991). Enhancement of solubility by temporary dimethoxybenzyl-substitution of peptide bonds. Towards the synthesis of defined oligomers of alanine and of lysyl-glutamyl-glycine. Int. J. Pept. Protein Res. 37, 556–564. doi: 10.1111/j.1399-3011.1991.tb00775.x

PubMed Abstract | CrossRef Full Text | Google Scholar

Böhm, M., Kuhl, T., Hardes, K., Coch, R., Arkona, C., Schlott, B., et al. (2012). Synthesis and functional characterization of tridegin and its analogues: inhibitors and substrates of factor XIIIa. Chem. Med. Chem. 7, 326–333. doi: 10.1002/cmdc.201100405

PubMed Abstract | CrossRef Full Text | Google Scholar

Böhm, M., Tietze, A. A., Heimer, P., Chen, M., and Imhof, D. (2014). Ionic liquids as reaction media for oxidative folding and native chemical ligation of cysteine-containing peptides. J. Mol. Lig. 192, 67–70. doi: 10.1016/j.molliq.2013.08.020

CrossRef Full Text | Google Scholar

Bondalapati, S., Eid, E., Mali, S. M., Wolberger, C., and Brik, A. (2017). Total chemical synthesis of SUMO-2-Lys63-linked diubiquitin hybrid chains assisted by removable solubilizing tags. Chem. Sci. 8, 4027–4034. doi: 10.1039/c7sc00488e

PubMed Abstract | CrossRef Full Text | Google Scholar

Bondarenko, V., Tillman, T., Xu, Y., and Tang, P. (2010). NMR structure of the transmembrane domain of the n-acetylcholine receptor β2 subunit. BBA Biomembr. 1798, 1608–1614. doi: 10.1016/j.bbamem.2010.04.014

PubMed Abstract | CrossRef Full Text | Google Scholar

Brailsford, J. A., Stockdill, J. L., Axelrod, A. J., Peterson, M. T., Vadola, P. A., Johnston, E. V., et al. (2018). Total chemical synthesis of human thyroid-stimulating hormone (hTSH) beta-subunit: application of arginine-tagged acetamidomethyl (Acm(R)) protecting groups. Tetrahedron 74, 1951–1956. doi: 10.1016/j.tet.2018.02.067

PubMed Abstract | CrossRef Full Text | Google Scholar

Cacace, M. G., Landau, E. M., and Ramsden, J. J. (1997). The Hofmeister series: salt and solvent effects on interfacial phenomena. Q. Rev. Biophys. 30, 241–277. doi: 10.1017/s0033583597003363

PubMed Abstract | CrossRef Full Text | Google Scholar

Canne, L. E., Bark, S. J., and Kent, S. B. H. (1996). Extending the applicability of native chemical ligation. J. Am. Chem. Soc. 118, 5891–5896. doi: 10.1021/ja960398s

CrossRef Full Text | Google Scholar

Carpino, L. A., and Han, G. Y. (1970). 9-fluorenylmethoxycarbonyl function, a new base-sensitive amino-protecting group. J. Am. Chem. Soc. 92:5748. doi: 10.1021/ja00722a043

CrossRef Full Text | Google Scholar

Carpino, L. A., Nasr, K., Abdel-Maksoud, A. A., El-Faham, A., Ionescu, D., Henklein, P., et al. (2009). Dicyclopropylmethyl peptide backbone protectant. Org. Lett. 11, 3718–3721. doi: 10.1021/ol901310q

PubMed Abstract | CrossRef Full Text | Google Scholar

Cergol, K. M., Thompson, R. E., Malins, L. R., Turner, P., and Payne, R. J. (2014). One-pot peptide ligation-desulfurization at glutamate. Org. Lett. 16, 290–293. doi: 10.1021/ol403288n

PubMed Abstract | CrossRef Full Text | Google Scholar

Chisholm, T. S., Clayton, D., Dowman, L. J., Sayers, J., and Payne, R. J. (2018). Native chemical ligation – Photodesulfurization in flow. J. Am. Chem. Soc. 140, 9020–9024. doi: 10.1021/jacs.8b03115

PubMed Abstract | CrossRef Full Text | Google Scholar

Chisholm, T. S., Kulkarni, S. S., Hossain, K. R., Cornelius, F., Clarke, R. J., and Payne, R. J. (2019). Peptide ligation and high dilution via reductive diselenide-selenoester ligation. J. Am. Chem. Soc. 142, 1090–1100. doi: 10.1021/jacs.9b12558

PubMed Abstract | CrossRef Full Text | Google Scholar

Clayton, D. J. (2005). Total chemical synthesis, vesicle-reconstitution, and, electrophysiological characterization of mechanosensitive channels from Escherichia coli and Mycobacterium tuberculosis. Biophys. J. 88, 79a–79a.

Google Scholar

Conibear, A. C., Watson, E. E., Payne, R. J., and Becker, C. F. W. (2018). Native chemical ligation in protein synthesis and semi-synthesis. Chem. Soc. Rev. 47, 9046–9068. doi: 10.1039/c8cs00573g

PubMed Abstract | CrossRef Full Text | Google Scholar

Cooper, G. J. S., Willis, A. C., Clark, A., Turner, R. C., Sim, R. B., and Reid, K. B. M. (1987). Purification and characterization of a peptide from amyloid-rich pancreases of Type-2 diabetic-patients. Proc. Nat. Acad. Sci. U.S.A. 84, 8628–8632. doi: 10.1073/pnas.84.23.8628

PubMed Abstract | CrossRef Full Text | Google Scholar

Cressey, D., and Callaway, E. (2017). Cryo-electron microscopy wins chemistry Nobel. Nature 550:167. doi: 10.1038/nature.2017.22738

PubMed Abstract | CrossRef Full Text | Google Scholar

Dawson, P. E., and Kent, S. B. H. (2000). Synthesis of native proteins by chemical ligation. Ann. Rev. Biochem. 69, 923–960.

PubMed Abstract | Google Scholar

Dawson, P. E., Muir, T. W., Clarklewis, I., and Kent, S. B. H. (1994). Synthesis of proteins by native chemical ligation. Science 266, 776–779. doi: 10.1126/science.7973629

PubMed Abstract | CrossRef Full Text | Google Scholar

Disotuar, M. M., Petersen, M. E., Nogueira, J. M., Kay, M. S., and Chou, D. H. C. (2019). Synthesis of hydrophobic insulin-based peptides using a helping hand strategy. Org. Biomol. Chem. 17, 1703–1708. doi: 10.1039/c8ob01212a

PubMed Abstract | CrossRef Full Text | Google Scholar

Dittmann, M., Sauermann, J., Seidel, R., Zimmermann, W., and Engelhard, M. (2010). Native chemical ligation of hydrophobic peptides in organic solvents. J. Pept. Sci. 16, 558–562. doi: 10.1002/psc.1285

PubMed Abstract | CrossRef Full Text | Google Scholar

Dittmann, M., Seidel, R., Chizhov, I., and Engelhard, M. (2014). Total chemical synthesis of a membrane protein domain analogue containing two transmembrane helices: functional reconstitution of the semisynthetic sensory rhodopsin/transducer complex. J. Pept. Sci. 20, 137–144. doi: 10.1002/psc.2605

PubMed Abstract | CrossRef Full Text | Google Scholar

Dittmann, M. E., and Martin, M. E. (2017). “Membrane proteins: chemical synthesis and ligation,” in Chemical Ligation: Tools for Biomolecule Synthesis and Modification, 1st Edn, eds A. R. Luca and D. D’andrea (Hoboken, NJ: John Wiley & Sons, Inc).

Google Scholar

Engelman, D. M., and Steitz, T. A. (1981). The spontaneous insertion of proteins into and across membranes: the helical hairpin hypothesis. Cell 23, 411–422. doi: 10.1016/0092-8674(81)90136-7

PubMed Abstract | CrossRef Full Text | Google Scholar

Englebretsen, D. R., and Alewood, P. F. (1996). Boc SPPS of two hydrophobic peptides using a “solubilising tail” strategy: dodecaalanine and chemotactic protein 10(42-55). Tetrahedron Lett. 37, 8431–8434. doi: 10.1016/0040-4039(96)01910-7

CrossRef Full Text | Google Scholar

Englebretsen, D. R., and Robillard, G. T. (1999). An N-terminal method for peptide solubilisation. Tetrahedron 55, 6623–6634. doi: 10.1016/s0040-4020(99)00309-9

PubMed Abstract | CrossRef Full Text | Google Scholar

Erdelyi, M., and Gogoll, A. (2002). Rapid microwave-assisted solid phase peptide synthesis. Synthesis-Stuttgart 11, 1592–1596. doi: 10.1055/s-2002-33348

CrossRef Full Text | Google Scholar

Fauvet, B., Butterfield, S. M., Fuks, J., Brik, A., and Lashuel, H. A. (2013). One-pot total chemical synthesis of human alpha-synuclein. Chem. Commun. 49, 9254–9256. doi: 10.1039/c3cc45353g

PubMed Abstract | CrossRef Full Text | Google Scholar

Fernandez-Llamazares, A. I., Adan, J., Mitjans, F., Spengler, J., and Albericio, F. (2014). Tackling lipophilicity of peptide drugs: replacement of the backbone N-methyl group of cilengitide by N-oligoethylene glycol (N-OEG) chains. Bioconjug. Chem. 25, 11–17. doi: 10.1021/bc4003844

PubMed Abstract | CrossRef Full Text | Google Scholar

Fujii, N., Otaka, A., Funakoshi, S., Bessho, K., Watanabe, T., Akaji, K., et al. (1987). Studies on peptides 151. syntheses of cystine-peptides by oxidation of s-protected cysteine-peptides with thallium(Iii) trifluoroacetate. Chem. Pharm. Bul. 35, 2339–2347. doi: 10.1248/cpb.35.2339

PubMed Abstract | CrossRef Full Text | Google Scholar

Fujii, N., Otaka, A., Watanabe, T., Okamachi, A., Tamamura, H., Yajima, H., et al. (1989). Silver Trifluoromethanesulfonate as an S-deprotecting reagent for the synthesis of cystine peptides. Chem. Commun. 5, 283–284.

Google Scholar

Fulcher, J., Petersen, M., Giesler, R., Cruz, Z., Eckert, D., Francis, J. N., et al. (2019). Chemical Synthesis of Shiga Toxin Subunit B Using a Next-Generation Traceless “Helping Hand” Solubilizing Tag. ChemRxiv.

Google Scholar

Harmand, T. J., Pattabiraman, V. R., and Bode, J. W. (2017). Chemical synthesis of the HighlyHydrophobic antiviral membrane-associated protein IFITM3 and modified variants. Angew. Chem. Int. Ed. 6, 12639–12643. doi: 10.1002/anie.201707554

PubMed Abstract | CrossRef Full Text | Google Scholar

Harris, P. W. R., and Brimble, M. A. (2009). Synthesis of an arginine tagged [Cys(155)-Arg(180)] fragment of NY-ESO-1: elimination of an undesired by-product using ‘in house’ resins. Synthesis-Stuttgart 20, 3460–3466.

Google Scholar

Harris, P. W. R., and Brimble, M. A. (2010). Toward the total chemical synthesis of the cancer protein NY-ESO-1. Biopolymers 94, 542–550. doi: 10.1002/bip.21351

PubMed Abstract | CrossRef Full Text | Google Scholar

Harris, P. W. R., Kowalczyk, R., Hay, D. L., and Brimble, M. A. (2013). A single pseudoproline and microwave solid phase peptide synthesis facilitates an efficient synthesis of human amylin 1-37. Int. J. Pept. Res. Ther. 19, 147–155. doi: 10.1007/s10989-012-9325-9

CrossRef Full Text | Google Scholar

Hirota, N., Mizuno, K., and Goto, Y. (1996). Cooperative α-helix formation of β-lactoglobulin and melittin induced by hexafluoroisopropanol. Protein Sci. 6, 416–421. doi: 10.1002/pro.5560060218

PubMed Abstract | CrossRef Full Text | Google Scholar

Horikawa, M., Shigeri, Y., Yumoto, N., Yoshikawa, S., Nakajima, T., and Ohfune, Y. (1998). Syntheses of potent Leu-enkephalin analogs possessing beta-hydroxy-alpha,alpha-disubstituted-alpha-amino acid and their characterization to opioid receptors. Bioorg. Med. Chem. Lett. 8, 2027–2032. doi: 10.1016/s0960-894x(98)00349-7

PubMed Abstract | CrossRef Full Text | Google Scholar

Hossain, M. A., Belgi, A., Lin, F., Zhang, S. D., Shabanpoor, F., Chan, L., et al. (2009). Use of a temporary “solubilizing” peptide tag for the fmoc solid-phase synthesis of human insulin glargine via use of regioselective disulfide bond formation. Bioconjugate Chem. 20, 1390–1396. doi: 10.1021/bc900181a

PubMed Abstract | CrossRef Full Text | Google Scholar

Howe, J., Quibell, M., and Johnson, T. (2000). A new generation of reversible backbone-amide protection for the solid phase synthesis of difficult sequences. Tetrahedron Lett. 41, 3997–4001. doi: 10.1016/s0040-4039(00)00537-2

CrossRef Full Text | Google Scholar

Huang, Y. C., Li, Y. M., Chen, Y., Pan, M., Li, Y. T., Yu, L., et al. (2013). Synthesis of autophagosomal marker protein LC3-II under detergent-free conditions. Angew. Chem. Int. Ed. 52, 4858–4862. doi: 10.1002/anie.201209523

PubMed Abstract | CrossRef Full Text | Google Scholar

Huang, Y. C., and Liu, L. (2015). Chemical synthesis of crystalline proteins. Sci. China-Chem. 58, 1779–1781. doi: 10.1007/s11426-015-5462-2

CrossRef Full Text | Google Scholar

Hyde, C., Johnson, T., Owen, D., Quibell, M., and Sheppard, R. C. (1994). Some difficult sequences made easy – A study of interchain association in solid-phase peptide-synthesis. Int. J. Pept. Prot. Res. 43, 431–440. doi: 10.1111/j.1399-3011.1994.tb00541.x

PubMed Abstract | CrossRef Full Text | Google Scholar

Isidro-Llobet, A., Just-Baringo, X., Alvarez, M., and Albericio, F. (2008). EDOTn and MIM, new peptide backbone protecting groups. Biopolymers 90, 444–449. doi: 10.1002/bip.20823

PubMed Abstract | CrossRef Full Text | Google Scholar

Jacobsen, M. T., Petersen, M. E., Ye, X., Galibert, M., Lorimer, G. H., Aucagne, V., et al. (2016). A helping hand to overcome solubility challenges in chemical protein synthesis. J. Am. Chem. Soc. 138, 11775–11782. doi: 10.1021/jacs.6b05719

PubMed Abstract | CrossRef Full Text | Google Scholar

Jaradat, D. M. M. (2018). Thirteen decades of peptide synthesis: key developments in solid phase peptide synthesis and amide bond formation utilized in peptide ligation. Amino Acids 50, 39–68. doi: 10.1007/s00726-017-2516-0

PubMed Abstract | CrossRef Full Text | Google Scholar

Jbara, M., Laps, S., Morgan, M., Kamnesy, G., Mann, G., Wolberger, C., et al. (2018). Palladium prompted on-demand cysteine chemistry for the synthesis of challenging and uniquely modified proteins. Nat. Commun. 9:3154.

Google Scholar

Jbara, M., Maity, S. K., Seenaiah, M., and Brik, A. (2016). Palladium mediated rapid deprotection of n-terminal cysteine under native chemical ligation conditions of the efficient preparation of synthetically challenging proteins (2016). J. Am. Chem. Soc. 138, 5069–5075. doi: 10.1021/jacs.5b13580

PubMed Abstract | CrossRef Full Text | Google Scholar

Jbara, M., Seenaiah, M., and Bri, A. (2014). Solid phase chemical ligation empolying a rink amide linker for the synthesis of hostone H2B protein. Chem. Commun. 50, 12534–12537. doi: 10.1039/c4cc06499b

PubMed Abstract | CrossRef Full Text | Google Scholar

Jin, K., and Li, X. C. (2018). Advances in native chemical ligation-desulfurization: a powerful strategy for peptide and protein synthesis. Chem. Eur. J. 24, 17397–17404. doi: 10.1002/chem.201802067

PubMed Abstract | CrossRef Full Text | Google Scholar

Johnson, E. C., and Kent, S. B. (2006). Synthesis, stability and optimized photolytic cleavage of 4-methoxy-2-nitrobenzyl backbone-protected peptides. Chem. Commun. 1557–1559.

Google Scholar

Johnson, E. C., Malito, E., Shen, Y., Rich, D., Tang, W. J., and Kent, S. B. (2007). Modular total chemical synthesis of a human immunodeficiency virus type 1 protease. J. Am. Chem. Soc. 129, 11480–11490. doi: 10.1021/ja072870n

PubMed Abstract | CrossRef Full Text | Google Scholar

Johnson, T., and Quibell, M. (1994). The N-(2-hydroxybenzyl) protecting group for amide bond protection in solid-phase peptide-synthesis. Tetrahedron Lett. 35, 463–466. doi: 10.1016/0040-4039(94)85081-x

CrossRef Full Text | Google Scholar

Johnson, T., Quibell, M., Owen, D., and Sheppard, R. C. (1993). A reversible protecting group for the amide bond in peptides – Use in the synthesis of difficult sequences. Chem. Commun. 4, 369–372. doi: 10.1039/c39930000369

CrossRef Full Text | Google Scholar

Johnson, T., Quibell, M., and Sheppard, R. C. (1995). N,O-bisFmoc derivatives of N-(2-hydroxy-4-methoxybenzyl)-amino acids: useful intermediates in peptide synthesis. J. Pept. Sci. 1, 11–25. doi: 10.1002/psc.310010104

PubMed Abstract | CrossRef Full Text | Google Scholar

Kasim, J. K., Kavianinia, I., Ng, J., Harris, P. W. R., Birch, N. P., and Brimble, M. A. (2019). Efficient synthesis and characterisation of the amyloid beta peptide, A(1-42), using a double linker system. Org. Biomol. Chem. 17, 30–34. doi: 10.1039/c8ob02929f

PubMed Abstract | CrossRef Full Text | Google Scholar

Kawakami, T., Akaji, K., and Aimoto, S. (2001). Peptide bond formation mediated by 4,5-dimethoxy-2-mercaptobenzylamine after periodate oxidation of the N-terminal serine residue. Org. Lett. 3, 1403–1405. doi: 10.1021/ol0157813

PubMed Abstract | CrossRef Full Text | Google Scholar

Kawashima, H., Kuruma, T., Yamashita, M., Sohma, Y., and Akaji, K. (2014). Synthesis of an O-acyl isopeptide by using native chemical ligation in an aqueous solvent system. J. Pept. Sci. 20, 361–365. doi: 10.1002/psc.2622

PubMed Abstract | CrossRef Full Text | Google Scholar

Kemp, D. S., and Kerkman, D. J. (1981). Models that demonstrate peptide-bond formation by prior thiol capture 2. Capture by organomercury derivatives. Tetrahedron Lett. 22, 185–186. doi: 10.1016/0040-4039(81)80050-0

CrossRef Full Text | Google Scholar

Kemp, D. S., Leung, S. L., and Kerkman, D. J. (1981). Models that demonstrate peptide-bond formation by prior thiol capture 1. Capture by disulfide formation. Tetrahedron Lett. 22, 181–184. doi: 10.1016/0040-4039(81)80049-4

CrossRef Full Text | Google Scholar

Kimmerlin, T., and Seebach, D. (2005). ’100 years of peptide synthesis’: ligation methods for peptide and protein synthesis with applications to beta-peptide assemblies. J. Pept. Res. 65, 229–260. doi: 10.1111/j.1399-3011.2005.00214.x

PubMed Abstract | CrossRef Full Text | Google Scholar

Kitzig, S., and Ruck-Braun, K. (2017). Synthesis of hemithioindigo-based chromopeptides by using the Tmb auxiliary in native chemical ligation studies. J. Pept. Sci. 23, 567–573. doi: 10.1002/psc.3001

PubMed Abstract | CrossRef Full Text | Google Scholar

Kochendoerfer, G. G., and Kent, S. B. (1999). Chemical protein synthesis. Curr. Opin. Chem. Biol. 3, 665–671.

Google Scholar

Kochendoerfer, G. G., Salom, D., Lear, J. D., Wilk-Orescan, R., Kent, S. B., and Degrado, W. F. (1999). Total chemical synthesis of the integral membrane protein influenza A virus M2: role of its C-terminal domain in tetramer assembly. Biochemistry 38, 11905–11913. doi: 10.1021/bi990720m

PubMed Abstract | CrossRef Full Text | Google Scholar

Koide, T., Otaka, A., and Fujii, N. (1993). Investigation of the dimethylsulfoxide trifluoroacetic-acid oxidation system for the synthesis of cystine-containing peptides. Chem. Pharm. Bull. 41, 1030–1034. doi: 10.1248/cpb.41.1030

PubMed Abstract | CrossRef Full Text | Google Scholar

Krogh, A., Larsson, B., Von Heijne, G., and Sonnhammer, E. L. (2001). Predicting transmembrane protein topology with a hidden Markov model: application to complete genomes. J. Mol. Biol. 305, 567–580. doi: 10.1006/jmbi.2000.4315

PubMed Abstract | CrossRef Full Text | Google Scholar

Kwon, B., Tietze, D., White, P. B., Liao, S. Y., and Hong, M. (2015). Chemical ligation of the influenza M2 protein for solid-state NMR characterization of the cytoplasmic domain. Protein Sci. 24, 1087–1099. doi: 10.1002/pro.2690

PubMed Abstract | CrossRef Full Text | Google Scholar

Ladokhin, A. S., Fernandez-Vidal, M., and White, S. H. (2010). CD spectroscopy of peptides and proteins bound to large unilamellar vesicles. J. Membr. Biol. 236, 247–253. doi: 10.1007/s00232-010-9291-0

PubMed Abstract | CrossRef Full Text | Google Scholar

Lahiri, S., Brehs, M., Olschewski, D., and Becker, C. F. W. (2011). Total chemical synthesis of an integral membrane enzyme: diacylglycerol kinase from Escherichia coli. Angew. Chem. Int. Ed. 50, 3988–3992. doi: 10.1002/anie.201006686

PubMed Abstract | CrossRef Full Text | Google Scholar

Li, J. B., Tang, S., Zheng, J. S., Tian, C. L., and Liu, L. (2017). Removable backbone modification method for the chemical synthesis of membrane proteins. Acc. Chem. Res. 50, 1143–1153. doi: 10.1021/acs.accounts.7b00001

PubMed Abstract | CrossRef Full Text | Google Scholar

Loibl, S. F., Dallmann, A., Hennig, K., Juds, C., and Seitz, O. (2018). Features of auxiliaries that enable native chemical ligation beyond glycine and cleavage via radical fragmentation. Chem. Eur. J. 24, 3623–3633. doi: 10.1002/chem.201705927

PubMed Abstract | CrossRef Full Text | Google Scholar

Loo, R. R. O., Dales, N., and Andrews, P. C. (1994). Surfactant effects on protein-structure examined by electrospray-ionization mass-spectrometry. Prot. Sci. 3, 1975–1983. doi: 10.1002/pro.5560031109

PubMed Abstract | CrossRef Full Text | Google Scholar

Maity, S. K., Jbara, M., Laps, S., and Brik, A. (2016a). Efficient palladium-assisted one-pot deprotection of (acetamidomethyl)cysteine following native chemical ligation and/or desulfurization to expedite chemical protein synthesis. Angew. Chem. Int. Ed. Engl. 55, 8104–8112. doi: 10.1002/anie.201603169

PubMed Abstract | CrossRef Full Text | Google Scholar

Maity, S. K., Mann, G., Jbara, M., Laps, S., Kamnesky, G., and Brik, A. (2016b). Palladium-assisted removal of a solubilizing tag from a cys side chain to facilitate peptide and protein synthesis. Org. Lett. 18, 3026–3029. doi: 10.1021/acs.orglett.6b01442

PubMed Abstract | CrossRef Full Text | Google Scholar

Mandala, V. S., Liao, S. Y., Gelenter, M. D., and Hong, M. (2019). The transmembrane conformation of the influenza B Virus M2 protein in lipid bilayers. Sci. Rep. 9:3725. doi: 10.1038/s41598-019-40217-1

PubMed Abstract | CrossRef Full Text | Google Scholar

Melnyk, R. A., Partridge, A. W., Yip, J., Wu, Y., Goto, N. K., and Deber, C. M. (2003). Polar residue tagging of transmembrane peptides. Biopolymers 71, 675–685. doi: 10.1002/bip.10595

PubMed Abstract | CrossRef Full Text | Google Scholar

Merrifield, R. B. (1963). Solid phase peptide synthesis 1. Synthesis of a tetrapeptide. J. Am. Chem. Soc. 85:2149. doi: 10.1021/ja00897a025

CrossRef Full Text | Google Scholar

Merrifield, R. B. (1969). Solid-phase peptide synthesis. Adv. Enz. Rel. Areas Mol. Biol. 32:221.

Google Scholar

Meutermans, W. D. F., Golding, S. W., Bourne, G. T., Miranda, L. P., Dooley, M. J., Alewood, P. F., et al. (1999). Synthesis of difficult cyclic peptides by inclusion of a novel photolabile auxiliary in a ring contraction strategy. J. Am. Chem. Soc. 121, 9790–9796. doi: 10.1021/ja992173y

CrossRef Full Text | Google Scholar

Mijalis, A. J., Thomas, D. A. III, Simon, M. D., Adamo, A., Beaumont, R., Jenson, K. F., et al. (2017). A fully atomataed flow-based approach for accelerated peptide synthesis. Nat. Chem. Biol. 13, 464–466. doi: 10.1038/nchembio.2318

PubMed Abstract | CrossRef Full Text | Google Scholar

Miloslavina, A. A., Leipold, E., Kijas, M., Stark, A., Heinemann, S. H., and Imhof, D. (2009). A room temperature ionic liquid as convenient solvent for the oxidative folding of conopeptides. J. Pept. Sci. 15, 72–77. doi: 10.1002/psc.1106

PubMed Abstract | CrossRef Full Text | Google Scholar

Milton, S. C. F., and Milton, R. C. D. (1990). An improved solid-phase synthesis of a difficult-sequence peptide using hexafluoro-2-propanol. Int. J. Pept. Prot. Res. 36, 193–196. doi: 10.1111/j.1399-3011.1990.tb00966.x

PubMed Abstract | CrossRef Full Text | Google Scholar

Miseta, A., and Csutora, P. (2000). Relationship between the occurrence of cysteine in proteins and the complexity of organisms. Mol. Biol. Evol. 17, 1232–1239. doi: 10.1093/oxfordjournals.molbev.a026406

PubMed Abstract | CrossRef Full Text | Google Scholar

Mitchell, N. J., Malins, L. R., Liu, X., Thompson, R. E., Chan, B., Radom, L., et al. (2015). Rapid additive-free selenocystine-selenoester peptide ligation. J. Am. Chem. Soc. 137, 14011–14014. doi: 10.1021/jacs.5b07237

PubMed Abstract | CrossRef Full Text | Google Scholar

Monbaliu, J. C. M., and Katritzky, A. R. (2012). Recent trends in Cys- and Ser/Thr-based synthetic strategies for the elaboration of peptide constructs. Chem. Commun. 48, 11601–11622. doi: 10.1039/c2cc34434c

PubMed Abstract | CrossRef Full Text | Google Scholar

Mutter, M., Nefzi, A., Sato, T., Sun, X., Wahl, F., and Wohr, T. (1995). Pseudo-prolines (Psi-Pro) for accessing inaccessible peptides. Pept. Res. 8, 145–153.

PubMed Abstract | Google Scholar

Nuijens, T., Toplak, A., Schmidt, M., Ricci, A., and Cabri, W. (2019). Natural occurring and engineered enzymes for peptide ligation and cyclization. Front. Chem. 7:829. doi: 10.3389/fchem.2019.00829

PubMed Abstract | CrossRef Full Text | Google Scholar

Offer, J. (1997). Application of reversible amide-bond protection to suppress peptide segment epimerisation. Tetrahedron Lett. 38, 9047–9050. doi: 10.1016/s0040-4039(97)10431-2

CrossRef Full Text | Google Scholar

Offer, J., Boddy, C. N., and Dawson, P. E. (2002). Extending synthetic access to proteins with a removable acyl transfer auxiliary. J. Am. Chem. Soc. 124, 4642–4646. doi: 10.1021/ja016731w

PubMed Abstract | CrossRef Full Text | Google Scholar

Oliveira, E., Miranda, A., Albericio, F., Andreu, D., Paiva, A. C. M., Nakaie, C. R., et al. (1997). Comparative evaluation of the synthesis and purification of transmembrane peptide fragments – Rat bradykinin receptor fragment 64-97 as model. J. Pept. Res. 49, 300–307. doi: 10.1111/j.1399-3011.1997.tb01130.x

PubMed Abstract | CrossRef Full Text | Google Scholar

Otaka, A., Ueda, S., Tomita, K., Yano, Y., Tamamura, H., Matsuzaki, K., et al. (2004). Facile synthesis of membrane-embedded peptides utilizing lipid bilayer-assisted chemical ligation. Chem. Commun. 15, 1722–1723.

Google Scholar

Palomo, J. M. (2014). Solid-phase peptide synthesis: an overview focused on the preparation of biologically relevant peptides. RSC Adv. 4, 32658–32672. doi: 10.1039/c4ra02458c

CrossRef Full Text | Google Scholar

Paradis-Bas, M., Tulla-Puche, J., and Albericio, F. (2014). 2-Methoxy-4-methylsulfinylbenzyl: a backbone amide safety-catch protecting group for the synthesis and purification of difficult peptide sequences. Chemistry 20, 15031–15039. doi: 10.1002/chem.201403668

PubMed Abstract | CrossRef Full Text | Google Scholar

Paradis-Bas, M., Tulla-Puche, J., and Albericio, F. (2015). Semipermanent C-terminal carboxylic acid protecting group: application to solubilizing peptides and fragment condensation. Org. Lett. 17, 294–297. doi: 10.1021/ol5033943

PubMed Abstract | CrossRef Full Text | Google Scholar

Paradis-Bas, M., Tulla-Puche, J., and Albericio, F. (2016). The road to the synthesis of “difficult peptides”. Chem. Soc. Rev. 45, 631–654. doi: 10.1039/c5cs00680e

PubMed Abstract | CrossRef Full Text | Google Scholar

Pentelute, B. L., and Kent, S. B. H. (2007). Selective desulfurization of cysteine in the presence of Cys(Acm) in polypeptides obtained by native chemical ligation. Org. Lett. 9, 687–690. doi: 10.1021/ol0630144

PubMed Abstract | CrossRef Full Text | Google Scholar

Quibell, M. J. (1999). “Difficult peptides,” in Fmoc Solid Phase Peptide Synthesis: A Practical Approach, eds W. Peter, and P. Chan (Oxford: Oxford University Press), 115–136.

Google Scholar

Reimann, O., Seitz, O., Sarma, D., and Zitterbart, R. (2019). A traceless catch-and-release method for rapid peptide purification. J. Pept. Sci. 25:e3136. doi: 10.1002/psc.3136

PubMed Abstract | CrossRef Full Text | Google Scholar

Rohrbacher, F., Zwicky, A., and Bode, J. W. (2017). Chemical synthesis of a homoserine-mutant of the antibacterial, head-to-tail cyclized protein AS-48 by α-ketoacid-hydroxylamine (KAHA) ligation. Chem. Sci. 8, 4051–4055. doi: 10.1039/c7sc00789b

PubMed Abstract | CrossRef Full Text | Google Scholar

Santoni, V., Molloy, M., and Rabilloud, T. (2000). Membrane proteins and proteomics: un amour impossible? Electrophoresis 21, 1054–1070. doi: 10.1002/(sici)1522-2683(20000401)21:6<1054::aid-elps1054>3.0.co;2-8

PubMed Abstract | CrossRef Full Text | Google Scholar

Saporito, A., Marasco, D., Chambery, A., Botti, P., Monti, S. M., Pedone, C., et al. (2006). The chemical synthesis of the Gstl protein by NCL on a X-met site. Biopolymers 83, 508–518. doi: 10.1002/bip.20582

PubMed Abstract | CrossRef Full Text | Google Scholar

Sato, T. (2016). Chemical synthesis of transmembrane peptide and its application for research on the transmembrane-juxtamembrane region of membrane protein. Biopolymers 106, 613–621. doi: 10.1002/bip.22775

PubMed Abstract | CrossRef Full Text | Google Scholar

Sato, T., Saito, Y., and Aimoto, S. (2005). Synthesis of the C-terminal region of opioid receptor like 1 in an SDS micelle by the native chemical ligation: effect of thiol additive and SDS concentration on ligation efficiency. J. Pept. Sci. 11, 410–416. doi: 10.1002/psc.634

PubMed Abstract | CrossRef Full Text | Google Scholar

Sayers, J., Thompson, R. E., Perry, K. J., Malins, L. R., and Payne, R. J. (2015). Thiazolidine-protected beta-thiol asparagine: applications in one-pot ligation-desulfurization chemistry. Org. Lett. 17, 4902–4905. doi: 10.1021/acs.orglett.5b02468

PubMed Abstract | CrossRef Full Text | Google Scholar

Schmidt, M., Toplak, A., Quaedflieg, P. J., and Nuijens, T. (2017). Enzyme-mediated ligation technologies for peptides and proteins. Curr. Opin. Chem. Biol. 38, 1–7. doi: 10.1016/j.cbpa.2017.01.017

PubMed Abstract | CrossRef Full Text | Google Scholar

Schnolzer, M., Alewood, P., Jones, A., Alewood, D., and Kent, S. B. H. (2007). In situ neutralization in boc-chemistry solid phase peptide synthesis - Rapid, high yield assembly of difficult sequences. Int. J. Pept. Res. Ther. 13, 31–44. doi: 10.1007/s10989-006-9059-7

PubMed Abstract | CrossRef Full Text | Google Scholar

Shen, F., Huang, Y. C., Tang, S., Chen, Y. X., and Liu, L. (2011). Chemical synthesis of integral membrane proteins: methods and applications. Israel J. Chem. 51, 940–952. doi: 10.1002/ijch.201100076

CrossRef Full Text | Google Scholar

Sheppard, R. (2003). The fluorenylmethoxycarbonyl group in solid phase synthesis. J. Pept. Sci. 9, 545–552. doi: 10.1002/psc.479

PubMed Abstract | CrossRef Full Text | Google Scholar

Shigematsu, H., Yang, Y. S., Yan, Y. Y., Chen, Y., and Sigworth, F. J. (2017). Cryo-EM structure of KV1.2 channels in liposomes. Biophys. J. 112, 576a–576a.

Google Scholar

Shigematsu, H., Yang, Y. S., Yan, Y. Y., and Sigworth, F. J. (2019). Cryo-EM imaging of Kv1.2 channels with membrane potential applied. Biophys. J. 116, 576a–576a.

Google Scholar

Simmonds, R. G. (1996). Use of the Hmb backbone-protecting group in the synthesis of difficult sequences. Int. J. Pept. Prot. Res. 47, 36–41. doi: 10.1111/j.1399-3011.1996.tb00807.x

PubMed Abstract | CrossRef Full Text | Google Scholar

Sohma, Y., Kitamura, H., Kawashima, H., Hojo, H., Yamashita, M., Akaji, K., et al. (2011). Synthesis of an O-acyl isopeptide by using native chemical ligation to efficiently construct a hydrophobic polypeptide. Tetrahedron Lett. 52, 7146–7148. doi: 10.1016/j.tetlet.2011.10.116

CrossRef Full Text | Google Scholar

Sohma, Y., Pentelute, B. L., Whittaker, J., Hua, Q. X., Whittaker, L. J., Weiss, M. A., et al. (2008). Comparative properties of insulin-like growth factor 1 (IGF-1) and [Gly7D-Ala]IGF-1 prepared by total chemical synthesis. Angew. Chem. Int. Ed. 47, 1102–1106. doi: 10.1002/anie.200703521

PubMed Abstract | CrossRef Full Text | Google Scholar

Srivastava, A. P., Luo, M., Zhou, W. C., Symersky, J., Bai, D. Y., Chambers, M. G., et al. (2018). High-resolution cryo-EM analysis of the yeast ATP synthase in a lipid membrane. Science 360:eaas9699. doi: 10.1126/science.aas9699

PubMed Abstract | CrossRef Full Text | Google Scholar

Ste Marie, E. J., and Hondal, R. J. (2018). Reduction of cysteine-S-protecting groups by triisopropylsilane. J. Pept. Sci. 24:e3130. doi: 10.1002/psc.3130

PubMed Abstract | CrossRef Full Text | Google Scholar

Swatloski, P. R., Spear, S. K., Holbrey, J. D., and Rogers, R. D. (2002). Dissolution of cellulose with ionic liquids. J. Am. Chem. Soc. 124, 4974–4975.

PubMed Abstract | Google Scholar

Tamamura, H., Otaka, A., Nakamura, J., Okubo, K., Koide, T., Ikeda, K., et al. (1995). Disulfide bond-forming reaction using a dimethyl-sulfoxide aqueous hcl system and its application to regioselective 2 disulfide bond formation. Int. J. Pept. Prot. Res. 45, 312–319. doi: 10.1111/j.1399-3011.1995.tb01043.x

PubMed Abstract | CrossRef Full Text | Google Scholar

Tang, S., Zuo, C., Huang, D.-L., Cai, X.-L., Zhang, L.-H., Tian, C.-L., et al. (2017). Chemical synthesis of membrane proteins by the removable backbone modification method. Nat. Protoc. 12, 2554–2569. doi: 10.1038/nprot.2017.129

PubMed Abstract | CrossRef Full Text | Google Scholar

Thennarasu, S., and Liu, C. F. (2010). A new safety-catch protecting group and linker for solid-phase synthesis. Tetrahedron Lett. 51, 3218–3220. doi: 10.1016/j.tetlet.2010.04.047

CrossRef Full Text | Google Scholar

Thompson, R. E., Chan, B., Radom, L., Jolliffe, K. A., and Payne, R. J. (2013). Chemoselective peptide ligation-desulfurization at aspartate. Angew. Chem. Int. Ed. 52, 9723–9727. doi: 10.1002/anie.201304793

PubMed Abstract | CrossRef Full Text | Google Scholar

Tiburu, E. K., Tyukhtenko, S., Deshmukh, L., Vinogradova, O., Janero, D. R., and Makriyannis, A. (2009). Structural biology of human cannbinoid receptor-2 helix 6 in membrane-mimetic environents. Biochem. Biophys. Res. Com. 384, 243–248. doi: 10.1016/j.bbrc.2009.04.099

PubMed Abstract | CrossRef Full Text | Google Scholar

Tickler, A. K., and Wade, J. D. (2007). Overview of solid phase synthesis of “difficult peptide” sequences. Curr. Protoc. Protein Sci. 18:18.

Google Scholar

Tietze, A. A., Heimer, P., Stark, A., and Imhof, D. (2012). Ionic liquid applications in peptide chemistry: synthesis, purification and analytical characterization processes. Molecules 17, 4158–4185. doi: 10.3390/molecules17044158

PubMed Abstract | CrossRef Full Text | Google Scholar

Tsuda, S., Masuda, S., and Yoshiya, T. (2019a). Solubilizing trityl-type tag to synthesize Asx/Glx-containing peptides. Chem. Biol. Chem. 20, 2063–2069. doi: 10.1002/cbic.201900193

PubMed Abstract | CrossRef Full Text | Google Scholar

Tsuda, S., Masuda, S., and Yoshiya, T. (2019b). The versatile use of solubilizing trityl tags for difficult peptide/protein synthesis. Org. Biomol. Chem. 17, 1202–1205. doi: 10.1039/c8ob03098g

PubMed Abstract | CrossRef Full Text | Google Scholar

Tsuda, S., Mochizuki, M., Ishiba, H., Yoshizawa-Kumagaye, K., Nishio, H., Oishi, S., et al. (2018a). Easy-to-attach/detach solubilizing-tag-aided chemical synthesis of an aggregative capsid protein. Angew. Chem. Int. Ed. 57, 2105–2109. doi: 10.1002/anie.201711546

PubMed Abstract | CrossRef Full Text | Google Scholar

Tsuda, S., Nishio, H., and Yoshiya, T. (2018b). Peptide self-cleavage at a canaline residue: application to a solubilizing tag system for native chemical ligation. Chem. Commun. 54, 8861–8864. doi: 10.1039/c8cc04579h

PubMed Abstract | CrossRef Full Text | Google Scholar

Valiyaveetil, F. I., Mackinnon, R., and Muir, T. W. (2002). Semisynthesis and folding of the potassium channel KcsA. J. Am. Chem. Soc. 124, 9113–9120. doi: 10.1021/ja0266722

PubMed Abstract | CrossRef Full Text | Google Scholar

Veber, D. F., Milkowski, J. D., Denkewalter, R. G., and Hirschmann, R. (1968). Synthesis of peptides in aqueous medium 4. A novel protecting group for cysteine. Tetrahedron Lett. 3057–3058. doi: 10.1016/s0040-4039(00)89595-7

CrossRef Full Text | Google Scholar

Veber, D. F., Varga, S. L., Hirschma, R., Milkowsk, J. D., and Denkewal, R. G. (1972). Acetamidomethyl – Novel thiol protecting group for cysteine. J. Am. Chem. Soc. 94:5456. doi: 10.1021/ja00770a600

PubMed Abstract | CrossRef Full Text | Google Scholar

Wallin, E., and von Heijne, G. (1998). Genome-wide analysis of integral membrane proteins from eubacterial, archaean, and eukaryotic organisms. Protein Sci. 7, 1029–1038. doi: 10.1002/pro.5560070420

PubMed Abstract | CrossRef Full Text | Google Scholar

Wan, Q., and Danishefsky, S. J. (2007). Free-radical-based, specific desulfurization of cysteine: a powerful advance in the synthesis of polypeptides and glycopolypeptides. Angew. Chem Int. Ed. 46, 9248–9252. doi: 10.1002/anie.200704195

PubMed Abstract | CrossRef Full Text | Google Scholar

Wehofsky, N., Wespe, C., Cerovsky, V., Pech, A., Hoess, E., Rudolph, R., et al. (2008). Ionic liquids and proteases: a clean alliance for semisynthesis. Chem. Biol. Chem. 9, 1493–1499. doi: 10.1002/cbic.200800025

PubMed Abstract | CrossRef Full Text | Google Scholar

Weygand, F., Steglich, W., Bjarnason, J., Akhtar, R., and Khan, N. M. (1966a). Leicht abspaltbare schutzgruppen fur saureamidfunktionen 1. Tetrahedron Lett. 3483. doi: 10.1016/s0040-4039(01)82815-x

CrossRef Full Text | Google Scholar

Weygand, F., Steglich, W., and Pietta, P. (1966b). Eine neue schutzgruppe fur die iminogruppe des histidins. Tetrahedron Lett. 7, 3751–3754. doi: 10.1016/s0040-4039(01)99959-9

CrossRef Full Text | Google Scholar

Wieland, T., Bokelmann, E., Bauer, L., Lang, H. U., and Lau, H. (1953). Uber peptidsynthesen 8. Bildung Von S-haltigen peptiden durch intramolekulare wanderung von aminoacylresten. Liebigs Ann. 583, 129–149. doi: 10.1002/jlac.19535830110

CrossRef Full Text | Google Scholar

Wohr, T., and Mutter, M. (1995). Pseudo-prolines in peptide-synthesis – Direct insertion of serine and threonine derived oxazolidines in dipeptides. Tetrahedron Lett. 36, 3847–3848. doi: 10.1016/0040-4039(95)00667-2

CrossRef Full Text | Google Scholar

Wohr, T., Wahl, F., Nefzi, A., Rohwedder, B., Sato, T., Sun, X. C., et al. (1996). Pseudo-prolines as a solubilizing, structure-disrupting protection technique in peptide synthesis. J. Am. Chem. Soc. 118, 9218–9227. doi: 10.1021/ja961509q

CrossRef Full Text | Google Scholar

Yamashiro, D., Blake, J., and Li, C. H. (1976). Use of trifluoroethanol for improved coupling in solid-phase peptide-synthesis. Tetrahedron Lett. 17, 1469–1472. doi: 10.1016/s0040-4039(00)71285-8

CrossRef Full Text | Google Scholar

Yan, L. Z., and Dawson, P. E. (2001). Synthesis of peptides and proteins without cysteine residues by native chemical ligation combined with desulfurization. J. Am. Chem. Soc. 123, 526–533. doi: 10.1021/ja003265m

PubMed Abstract | CrossRef Full Text | Google Scholar

Yang, S. H., Wojnar, J. M., Harris, P. W., Devries, A. L., Evans, C. W., and Brimble, M. A. (2013). Chemical synthesis of a masked analogue of the fish antifreeze potentiating protein (AFPP). Org. Biomol. Chem. 11, 4935–4942. doi: 10.1039/c3ob41066h

PubMed Abstract | CrossRef Full Text | Google Scholar

Yildirim, M. A., Goh, K. I., Cusick, M. E., Barabasi, A. L., and Vidal, M. (2007). Drug-target network. Nat. Biotechnol. 25, 1119–1126.

Google Scholar

Yoo, J., Wu, M., Yin, Y., Herzik, MA Jr, Lander, G. C., and Lee, S. Y. (2018). Cryo-EM structure of a mitochondrial calcium uniporter. Science 361, 506–511. doi: 10.1126/science.aar4056

PubMed Abstract | CrossRef Full Text | Google Scholar

Zahariev, S., Guarnaccia, C., Pongor, C. I., Quaroni, L., Cemazar, M., and Pongor, S. (2006). Synthesis of ‘difficult’ peptides free of aspartimide and related products, using peptoid methodology. Tetrahedron Lett. 47, 4121–4124. doi: 10.1016/j.tetlet.2006.04.074

CrossRef Full Text | Google Scholar

Zeng, W. G., Regamey, P. O., Rose, K., Wang, Y. Z., and Bayer, E. (1997). Use of Fmoc-N-(2-hydroxy-4-methoxybenzyl)amino acids in peptide synthesis. J. Pept. Res. 49, 273–279. doi: 10.1111/j.1399-3011.1997.tb00887.x

PubMed Abstract | CrossRef Full Text | Google Scholar

Zhan, C., Zhao, L., Chen, X., Lu, W. Y., and Lu, W. (2013). Total chemical synthesis of dengue 2 virus capsid protein via native chemical ligation: role of the conserved salt-bridge. Bioorg. Med. Chem. 21, 3443–3449. doi: 10.1016/j.bmc.2013.04.035

PubMed Abstract | CrossRef Full Text | Google Scholar

Zhang, M., Peyear, T., Patmanidis, I., Greathouse, D. V., Marrink, S. J., Andersen, O. S., et al. (2018). Fluorinated alcohol’s effect on lipid bilayer properties. Biophys. J. 155, 679–689. doi: 10.1016/j.bpj.2018.07.010

PubMed Abstract | CrossRef Full Text | Google Scholar

Zhang, S., Lin, F., Hossain, M. A., Shabanpoor, F., Tregear, G. W., and Wade, J. D. (2008). Simultaneous post-cysteine(S-Acm) group removal quenching of iodine and isolation of peptide by one step ether precipitation. Int. J. Pept. Res. Ther. 14, 301–305. doi: 10.1007/s10989-008-9148-x

CrossRef Full Text | Google Scholar

Zhang, Y. J., and Cremer, P. S. (2006). Interactions between macromolecules and ions: the Hofmeister series. Curr. Opin. Chem. Biol. 10, 658–663. doi: 10.1016/j.cbpa.2006.09.020

PubMed Abstract | CrossRef Full Text | Google Scholar

Zhao, D. D., Fan, X. W., Hao, H., Zhang, H. L., and Guo, Y. (2019). Temporary solubilizing tags method for the chemical synthesis of hydrophobic proteins. Curr. Org. Chem. 23, 2–13. doi: 10.2174/1385272822666181211121758

CrossRef Full Text | Google Scholar

Zheng, J. S., He, Y., Zuo, C., Cai, X. Y., Tang, S., Wang, Z. A., et al. (2016). Robust chemical synthesis of membrane proteins through a general method of removable backbone modification. J. Am. Chem. Soc. 138, 3553–3561. doi: 10.1021/jacs.6b00515

PubMed Abstract | CrossRef Full Text | Google Scholar

Zheng, J. S., Yu, M., Qi, Y. K., Tang, S., Shen, F., Wang, Z. P., et al. (2014). Expedient total synthesis of small to medium-sized membrane proteins via fmoc chemistry. J. Am. Chem. Soc. 136, 3695–3704. doi: 10.1021/ja500222u

PubMed Abstract | CrossRef Full Text | Google Scholar

Zuo, C., Tang, S., Si, Y. Y., Wang, Z. P. A., Tian, C. L., and Zheng, J. S. (2016). Efficient synthesis of longer A beta peptides via removable backbone modification. Org. Biomol. Chem. 14, 5012–5018. doi: 10.1039/c6ob00712k

PubMed Abstract | CrossRef Full Text | Google Scholar

Keywords: solid phase peptide synthesis, membrane-associated proteins, native chemical ligation, conjugation, transmembrane peptide

Citation: Mueller LK, Baumruck AC, Zhdanova H and Tietze AA (2020) Challenges and Perspectives in Chemical Synthesis of Highly Hydrophobic Peptides. Front. Bioeng. Biotechnol. 8:162. doi: 10.3389/fbioe.2020.00162

Received: 31 October 2019; Accepted: 18 February 2020;
Published: 04 March 2020.

Edited by:

Alexej Kedrov, Heinrich Heine University of Düsseldorf, Germany

Reviewed by:

Muhammad Jbara, Massachusetts Institute of Technology, United States
Yixin Zhang, Dresden University of Technology, Germany
Vangelis Agouridas, École Nationale Supérieure de Chimie de Lille, France

Copyright © 2020 Mueller, Baumruck, Zhdanova and Tietze. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.

*Correspondence: Alesia A. Tietze, alesia.a.tietze@gu.se

Disclaimer: All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.